SIST EN ISO 8030:2014
(Main)Rubber and plastics hoses - Method of test for flammability (ISO 8030:2014)
Rubber and plastics hoses - Method of test for flammability (ISO 8030:2014)
EN ISO 8030 specifies a method for assessing the flammability of hoses, except for hoses intended for use with petroleum fuels for combustion engines. The method is restricted to hoses of sizes up to and including nominal bore of 50 mm.
Gummi- und Kunststoffschläuche - Verfahren zur Prüfung der Entflammbarkeit (ISO 8030:2014)
Diese Internationale Norm legt ein Verfahren zur Beurteilung der Entflammbarkeit von Schläuchen fest, ausgenommen Schläuche für die Verwendung mit Benzin für Verbrennungsmotoren. Das Verfahren ist begrenzt auf Schläuche mit Nenndurchmessern bis zu 50 mm.
ANMERKUNG 1 Der Anwender wird auf die entsprechende Schlauchnorm mit den Anforderungen hinsichtlich Brennen und Nachglühen verwiesen.
ANMERKUNG 2 Das Verfahren für die Prüfung der Entflammbarkeit von Schläuchen für die Verwendung mit Benzin ist festgelegt in ISO 13774.
Tuyaux en caoutchouc et en plastique - Méthode d'essai d'inflammabilité (ISO 8030:2014)
L'ISO 8030:2014 spécifie une méthode pour l´évaluation de l'inflammabilité des tuyaux en caoutchouc et en plastique, à l'exception des tuyaux prévus pour être utilisés avec les carburants pétroliers dans les moteurs à combustion. La méthode est limitée aux tuyaux ayant un diamètre intérieur nominal inférieur ou égal à 50 mm.
Gumene in polimerne cevi - Metoda preskušanja vnetljivosti (ISO 8030:2014)
Standard EN ISO 8030 določa metodo za ocenjevanje vnetljivosti cevi z izjemo cevi, namenjenih uporabi z naftnimi gorivi pri motorjih z izgorevanjem. Metoda je omejena na cevi z največjo velikostjo in nazivnim premerom 50 mm.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 8030:2014
01-oktober-2014
1DGRPHãþD
SIST EN ISO 8030:2000
Gumene in polimerne cevi - Metoda preskušanja vnetljivosti (ISO 8030:2014)
Rubber and plastics hoses - Method of test for flammability (ISO 8030:2014)
Gummi- und Kunststoffschläuche - Verfahren zur Prüfung der Entflammbarkeit (ISO
8030:2014)
Tuyaux en caoutchouc et en plastique - Méthode d'essai d'inflammabilité (ISO
8030:2014)
Ta slovenski standard je istoveten z: EN ISO 8030:2014
ICS:
13.220.40 Sposobnost vžiga in Ignitability and burning
obnašanje materialov in behaviour of materials and
proizvodov pri gorenju products
83.140.40 Gumene cevi Hoses
SIST EN ISO 8030:2014 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 8030:2014
---------------------- Page: 2 ----------------------
SIST EN ISO 8030:2014
EUROPEAN STANDARD
EN ISO 8030
NORME EUROPÉENNE
EUROPÄISCHE NORM
July 2014
ICS 23.040.70; 13.220.40 Supersedes EN ISO 8030:1997
English Version
Rubber and plastics hoses - Method of test for flammability (ISO
8030:2014)
Tuyaux en caoutchouc et en plastique - Méthode d'essai Gummi- und Kunststoffschläuche - Verfahren zur Prüfung
d'inflammabilité (ISO 8030:2014) der Entflammbarkeit (ISO 8030:2014)
This European Standard was approved by CEN on 28 June 2014.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2014 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 8030:2014 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 8030:2014
EN ISO 8030:2014 (E)
Contents Page
Foreword .3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 8030:2014
EN ISO 8030:2014 (E)
Foreword
This document (EN ISO 8030:2014) has been prepared by Technical Committee ISO/TC 45 “Rubber and
rubber products” in collaboration with Technical Committee CEN/TC 218 “Rubber and plastics hoses and
hose assemblies” the secretariat of which is held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by January 2015, and conflicting national standards shall be withdrawn at
the latest by January 2015.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 8030:1997.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
Endorsement notice
The text of ISO 8030:2014 has been approved by CEN as EN ISO 8030:2014 without any modification.
3
---------------------- Page: 5 ----------------------
SIST EN ISO 8030:2014
---------------------- Page: 6 ----------------------
SIST EN ISO 8030:2014
INTERNATIONAL ISO
STANDARD 8030
Third edition
2014-07-15
Rubber and plastics hoses — Method
of test for flammability
Tuyaux en caoutchouc et en plastique — Méthode d’essai
d’inflammabilité
Reference number
ISO 8030:2014(E)
©
ISO 2014
---------------------- Page: 7 ----------------------
SIST EN ISO 8030:2014
ISO 8030:2014(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2014
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2014 – All rights reserved
---------------------- Page: 8 ----------------------
SIST EN ISO 8030:2014
ISO 8030:2014(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 General . 1
4 Apparatus . 1
5 Test piece . 2
6 Conditioning . 2
7 Procedure. 2
8 Expression of results . 2
9 Requirements . 3
10 Test report . 3
Bibliography . 7
© ISO 2014 – All rights reserved iii
---------------------- Page: 9 ----------------------
SIST EN ISO 8030:2014
ISO 8030:2014(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-gove
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.