EN ISO 14329:2003

Resistance welding - Destructive tests of welds - Failure types and geometric measurements for resistance spot, seam and projection welds (ISO 14329:2003)

ISO 14329:2003 specifies the definitions of the geometric measurements and fracture types to be used in relation to the testing of resistance spot, projection and seam welds in which different loading configurations cause different stress distributions in the weld. The aim of these definitions is to give a base for all other related standards.

Widerstandsschweißen - Zerstörende Prüfung von Schweißverbindungen - Brucharten und geometrische Messgrößen für Widerstandspunkt-, Rollennaht- und Buckelschweißungen (ISO 14329:2003)

Diese Norm legt Definitionen für die geometrischen Messgrößen und Brucharten fest, die für das Prüfen von Widerstandspunkt-, Buckel- und Rollennahtschweißungen zu verwenden sind und bei denen verschiedene Belastungsanordnungen zu unterschiedlichen Spannungsverteilungen in der Schweißung führen, siehe Bild 1. Es ist Ziel, mit diesen Definitionen eine Grundlage für alle anderen verwandten Normen zu schaffen.
Legende
1   Scherzugprüfung
2   Kopfzugprüfung
3   Schälprüfung
4   Torsionsprüfung
a   Prüflast
Bild 1 - Schematische Erklärungen der Spannungsverteilung abhängig von der Richtung der Prüfkraft

Soudage par résistance - Essais destructifs des soudures - Types de rupture et dimensions géométriques pour les assemblages soudés par résistance par points, à la molette et par bossages (ISO 14329:2003)

L'ISO 14329:2003 donne les définitions des mesures géométriques et des types de rupture devant être utilisées dans le domaine des essais de résistance des soudures par résistance par points, à la molette et par bossages, dans lesquelles différentes configurations de chargement entraîneront des répartitions de contraintes différentes dans la soudure. Le but de ces définitions est de fournir une base pour toutes les autres normes concernées.

Uporovno točkovno varjenje - Porušitveno preskušanje zvarov - Vrste napak in geometrijske meritve za uporovne točkovne, kolutne in bradavične zvare (ISO 14329:2003)

General Information

• Status: Withdrawn
• Publication Date: 30-Jun-2003
• Withdrawal Date: 11-May-2021
• ICS: 25.160.40 - Welded joints and welds
• Technical Committee: CEN/TC 121 - Welding
• Drafting Committee: CEN/TC 121/WG 21 - Testing of welds
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 12-May-2021
• Ref Project: SIST EN ISO 14329:2004 - Resistance welding - Destructive tests of welds - Failure types and geometric measurements for resistance spot, seam and projection welds (ISO 14329:2003)

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Widerstandsschweißen - Zerstörende Prüfung von Schweißverbindungen - Brucharten und geometrische Messgrößen für Widerstandspunkt-, Rollennaht- und Buckelschweißungen (ISO 14329:2003)Soudage par résistance - Essais destructifs des soudures - Types de rupture et dimensions géométriques pour les assemblages soudés par résistance par points, a la molette et par bossages (ISO 14329:2003)Resistance welding - Destructive tests of welds - Failure types and geometric measurements for resistance spot, seam and projection welds (ISO 14329:2003)25.160.40Varjeni spoji in variWelded jointsICS:Ta slovenski standard je istoveten z:EN ISO 14329:2003SIST EN ISO 14329:2004en01-junij-2004SIST EN ISO 14329:2004SLOVENSKI
STANDARD



SIST EN ISO 14329:2004



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN ISO 14329July 2003ICS 25.160.40English versionResistance welding - Destructive tests of welds - Failure typesand geometric measurements for resistance spot, seam andprojection welds (ISO 14329:2003)Soudage par résistance - Essais destructifs des soudures -Types de rupture et dimensions géométriques pour lesassemblages soudés par résistance par points, à lamolette et par bossages (ISO 14329:2003)Widerstandsschweißen - Zerstörende Prüfung vonSchweißverbindungen - Brucharten und geometrischeMessgrößen für Widerstandspunkt-, Rollennaht- undBuckelschweißungen (ISO 14329:2003)This European Standard was approved by CEN on 5 June 2003.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and UnitedKingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2003 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN ISO 14329:2003 ESIST EN ISO 14329:2004



EN ISO 14329:2003 (E)2CORRECTED
2003-09-24ForewordThis document (EN ISO 14329:2003) has been prepared by Technical Committee ISO/TC 44"Welding and allied processes" in collaboration with Technical Committee CEN/TC 121"Welding", the secretariat of which is held by DS.This European Standard shall be given the status of a national standard, either by publication ofan identical text or by endorsement, at the latest by January 2004, and conflicting nationalstandards shall be withdrawn at the latest by January 2004.According to the CEN/CENELEC Internal Regulations, the national standards organizations ofthe following countries are bound to implement this European Standard: Austria, Belgium, CzechRepublic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland andthe United Kingdom.Endorsement noticeThe text of ISO 14329:2003 has been approved by CEN as EN ISO 14329:2003 without anymodifications.SIST EN ISO 14329:2004



Reference numberISO 14329:2003(E)© ISO 2003
INTERNATIONAL STANDARD ISO14329First edition2003-07-01Resistance welding — Destructive tests of welds — Failure types and geometric measurements for resistance spot, seam and projection welds Soudage par résistance — Essais destructifs des soudures — Types de rupture et dimensions géométriques pour les assemblages soudés par résistance par points, à la molette et par bossages
SIST EN ISO 14329:2004



ISO 14329:2003(E) PDF disclaimer This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat accepts no liability in this area. Adobe is a trademark of Adobe Systems Incorporated. Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters were optimized for printing. Every care has been taken to ensure that the file is suitable
...