EN ISO 12996:2013

Mechanical joining - Destructive testing of joints - Specimen dimensions and test procedure for tensile shear testing of single joints (ISO 12996:2013)

ISO 12996:2013 specifies the geometry of the test specimens and the procedure for the tensile shear testing of single mechanical joints on single and multilayer specimens up to a single sheet thickness of 4,5 mm.
The term sheet, as used in ISO 12996:2013, includes extrusions and cast materials.
The purpose of the tensile shear test is to determine the mechanical characteristics and failure modes of the joints made with the different methods.
ISO 12996:2013 does not apply to civil engineering applications such as metal building and steel construction which are covered by other applicable standards.

Mechanisches Fügen - Zerstörende Prüfung von Verbindungen - Probenmaße und Prüfverfahren für die Scherzugprüfung von Einpunktproben (ISO 12996:2013)

Diese Internationale Norm enthält Festlegungen für die Probengeometrie und das Verfahren für die Scherzugprüfung von Einpunktverbindungen an ein- und mehrlagigen Proben bis zu einer Dicke eines einzelnen Bleches von 4,5 mm fest.
Der Begriff Blech, so wie er in dieser Internationalen Norm verwendet wird, umfasst extrudierte Werkstoffe und Gusswerkstoffe.
Das Ziel der Scherzugprüfung ist, die mechanischen Kennwerte und die Versagensarten der mit unterschiedlichen Verfahren hergestellten Verbindungen zu bestimmen.
Diese Norm soll nicht im Hochbau angewendet werden, wie z. B. für Bauten aus Metall und Stahl-konstruktionen, die durch andere anwendbare Normen abgedeckt werden.

Assemblage mécanique - Essais destructifs des jonctions - Dimensions des éprouvettes et procédures d'essai pour essais de traction-cisaillement des jonctions uniques (ISO 12996:2013)

L'ISO 12996:2013 spécifie la géométrie des éprouvettes et le mode opératoire pour les essais de traction-cisaillement des assemblages mécaniques simples sur des éprouvettes mono et multicouches jusqu'à une épaisseur de tôle individuelle de 4,5 mm.
Le terme « tôle », tel qu'il est employé dans l'ISO 12996:2013, comprend les matériaux extrudés et les matériaux de fonderie.
L'essai de traction-cisaillement a pour objet de déterminer les caractéristiques mécaniques et les types de défaillances des assemblages réalisés selon les différentes méthodes.
L'ISO 12996:2013 ne s'applique pas aux applications de génie civil telles que la construction métallique et la construction en acier qui sont couvertes par d'autres normes.

Mehansko spajanje - Porušitveno preskušanje spojev - Mere primerkov in preskusni postopki za natezno strižno preskušanje enojnih spojev (ISO 12996:2013)

Ta mednarodni standard določa geometrijo preskusnih vzorcev ter postopek za natezno strižno preskušanje posameznih mehanskih spojev na eno- in večplastnih vzorcih do debeline posamezne plasti 4,5 mm. Izraz plast, uporabljen v tem mednarodnem standardu, vključuje materiale za ekstrudiranje in vlivanje. Namen natezno strižnega preskušanja je določiti mehanske lastnosti in napake spojev, izdelanih z različnimi metodami. Ta mednarodni standard ne velja za proizvode za inženirske objekte, kot so kovinske stavbe in jeklene konstrukcije, ki jih zajemajo drugi ustrezni standardi.

General Information

• Status: Published
• Publication Date: 02-Jul-2013
• Withdrawal Date: 30-Jan-2014
• ICS: 21.060.01 - Fasteners in general
• ICS: 25.160.10 - Welding processes
• ICS: 25.160.40 - Welded joints and welds
• Technical Committee: CEN/TC 121 - Welding
• Drafting Committee: CEN/TC 121 - Welding
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 03-Jul-2013
• Completion Date: 03-Jul-2013
• Ref Project: SIST EN ISO 12996:2013 - Mechanical joining - Destructive testing of joints - Specimen dimensions and test procedure for tensile shear testing of single joints (ISO 12996:2013)

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 12996:2013
01-september-2013
Mehansko spajanje - Porušitveno preskušanje spojev - Mere primerkov in
preskusni postopki za natezno strižno preskušanje enojnih spojev (ISO
12996:2013)
Mechanical joining - Destructive testing of joints - Specimen dimensions and test
procedure for tensile shear testing of single joints (ISO 12996:2013)
Mechanisches Fügen - Zerstörende Prüfung von Verbindungen - Probenmaße und
Prüfverfahren für die Scherzugprüfung von Einpunktproben (ISO 12996:2013)
Assemblage mécanique - Essais destructifs des assemblages - Dimensions des
éprouvettes et mode opératoire d'essai pour les essais de traction-cisaillement des
assemblages simples (ISO 12996:2013)
Ta slovenski standard je istoveten z: EN ISO 12996:2013
ICS:
25.160.40 Varjeni spoji in vari Welded joints
SIST EN ISO 12996:2013 en,fr
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 12996:2013

---------------------- Page: 2 ----------------------

SIST EN ISO 12996:2013


EUROPEAN STANDARD
EN ISO 12996

NORME EUROPÉENNE

EUROPÄISCHE NORM
July 2013
ICS 25.160.40; 25.160.10
English Version
Mechanical joining - Destructive testing of joints - Specimen
dimensions and test procedure for tensile shear testing of single
joints (ISO 12996:2013)
Assemblage mécanique - Essais destructifs des jonctions - Mechanisches Fügen - Zerstörende Prüfung von
Dimensions des éprouvettes et procédures d'essai pour Verbindungen - Probenmaße und Prüfverfahren für die
essais de traction-cisaillement des jonctions uniques (ISO Scherzugprüfung von Einpunktproben (ISO 12996:2013)
12996:2013)
This European Standard was approved by CEN on 15 June 2013.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2013 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 12996:2013: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 12996:2013
EN ISO 12996:2013 (E)
Contents Page
Foreword .3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 12996:2013
EN ISO 12996:2013 (E)
Foreword
This document (EN ISO 12996:2013) has been prepared by Technical Committee ISO/TC 44 "Welding and
allied processes" in collaboration with Technical Committee CEN/TC 121 “Welding and allied processes” the
secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by January 2014, and conflicting national standards shall be withdrawn at
the latest by January 2014.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
Endorsement notice
The text of ISO 12996:2013 has been approved by CEN as EN ISO 12996:2013 without any modification.

3

-------------
...