EN 13031-1:2001

Greenhouses - Design and construction - Part 1: Commercial production greenhouses

This European Standard specifies principles and requirements for the mechanical resistance and sta-bility, serviceability and durability for design and construction of commercial production greenhouse structures irrespective of material, including their founda-tions, for the professional production of plants and crops.
Fire resistance-related aspects are not covered in this standard.

Gewächshäuser - Bemessung und Konstruktion - Teil 1: Kulturgewächshäuser

Diese Europäische Norm legt die Prinzipien und Anforderungen für den Widerstand, die Stabilität, die Gebrauchstauglichkeit und die Beständigkeit für den Entwurf von Kulturgewächshäusern und deren Fundamente, unabhängig vom verwendeten Material, zur kommerziellen Pflanzenproduktion fest. Fragen der Feuerwiderstandsdauer werden in dieser Norm nicht berührt.

Serres - Calcul et construction - Partie 1: Serres de production

Le présent projet de norme européenne spécifie des principes et des exigences de résistance et de stabilité mécanique, d'aptitude au service et de durabilité applicables au calcul et à la conception des structures de serres de production, pour la production professionnelle de plantes et de cultures quel qu'en soit le matériau, y compris les fondations.
Les aspects concernant la résistance au feu ne sont pas traités dans la présente norme.

Rastlinjaki – Projektiranje in gradnja – 1. del. Proizvodni rastlinjaki

General Information

• Status: Withdrawn
• Publication Date: 11-Dec-2001
• Withdrawal Date: 17-Dec-2019
• ICS: 65.040.30 - Greenhouses and other installations
• Technical Committee: CEN/TC 284 - Greenhouses
• Drafting Committee: CEN/TC 284/WG 1 - Definitions and classifications
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 18-Dec-2019
• Ref Project: SIST EN 13031-1:2004 - Greenhouses - Design and construction - Part 1: Commercial production greenhouses

Relations

• Replaced By: EN 13031-1:2019 - Greenhouses - Design and construction - Part 1: Commercial production greenhouses
• Effective Date: 08-Jun-2022

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Rastlinjaki – Projektiranje in gradnja – 1. del. Proizvodni rastlinjakiGewächshäuser - Bemessung und Konstruktion - Teil 1: KulturgewächshäuserSerres - Calcul et construction - Partie 1: Serres de productionGreenhouses - Design and construction - Part 1: Commercial production greenhouses65.040.30Rastlinjaki in druge napraveGreenhouses and other installationsICS:Ta slovenski standard je istoveten z:EN 13031-1:2001SIST EN 13031-1:2004en,fr,de01-september-2004SIST EN 13031-1:2004SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13031-1December 2001ICS 65.040.30English versionGreenhouses: Design and construction - Part 1: Commercialproduction greenhousesSerres: Calcul et construction - Partie 1: Serres deproductionGewächshäuser: Bemessung und Konstruktion - Teil 1:KulturgewächshäuserThis European Standard was approved by CEN on 7 April 2001.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2001 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13031-1:2001 ESIST EN 13031-1:2004

Structural capacity of cladding.30Annex B (normative)
Wind actions.34Annex C (normative)
Snow actions.56Annex D (normative)
Ultimate limit states of arches.60Annex E
(normative)
Country related factors, coefficients and formulas.64Annex F (normative)
Owner's manual and identification plaque.83Annex G
(informative)
Instructions for maintenance and repair.85Annex H (informative)
Structural detailing.86Annex I
(informative)
Calculation method for film covered greenhouses.90Bibliography.94SIST EN 13031-1:2004

Execution of steel structures - Part 1: General rules and rules for buildingsEN 1096-1, Glass in building - Coated glass - Part 1: Definitions and classificationprEN 1279-1:1998, Glass in building - Insulating glass units - Part 1: Generalities, dimensional tolerances andrules for the system descriptionEN 1863-1, Glass in building - Heat strengthened soda lime silicate glass – Part 1: Definition and descriptionENV 1991-1:1994, Eurocode 1 - Basis of design and actions on structures - Part 1: Basis of designENV 1991-2-1, Eurocode 1: Basis of design and actions on structures - Part 2-1: Densities, self-weight andimposed loadsENV 1991-2-3, Eurocode 1: Basis of design and actions on structures - Part 2-3: Actions on structures -Snow loadsENV 1991-2-4, Eurocode 1: Basis of design and actions on structures - Part 2-4: Actions on structures - WindactionsENV 1992-1-1:1991, Eurocode 2: Design of concrete structures - Part 1-1: General rules and rules forbuildingsENV 1993-1-1:1992, Eurocode 3: Design of steel structures - Part 1-1: General rules and rules for buildingsENV 1993-1-3:1999,
Eurocode 3: Design of steel structures - Part 1-3: General rules – Supplementary rulesfor cold formed thin gauge members and sheetingENV 1995-1-1:1993, Eurocode 5: Design of timber structures - Part 1-1: General rules and rules for buildingsENV 1997-1:1994, Eurocode 7: Geotechnical design- Part 1: General rulesENV 1998-1-1:1994, Eurocode 8: Design provisions for earthquake resistance of structures - Part 1-1:General rules - Seismic actions and general requirements for structuresENV 1999-1-1:1998, Eurocode 9: Design of aluminium structures - Part 1-1: General rules - General rulesand rules for buildingsEN 12150-1 – Glass in building - Thermally toughened soda lime silicate safety glass – Part 1: Definition anddescriptionEN 12337-1 – Glass in building - Chemically strengthened soda lime silicate glass – Part 1: Definition anddescriptionSIST EN 13031-1:2004
...