EN ISO 3949:2014

Plastics hoses and hose assemblies - Textile-reinforced types for hydraulic applications - Specification (ISO 3949:2009)

ISO 3949:2009 specifies requirements for three types of textile-reinforced thermoplastics hose and hose assembly of nominal size from 3,2 to 25. Each type is divided into two classes dependent on electrical conductivity requirements. They are suitable for use with water-based hydraulic fluids HFC, HFAE, HFAS and HFB as defined in ISO 6743‑4 at temperatures ranging from 0 °C to +60 °C and oil-based hydraulic fluids HH, HL, HM, HR and HV as defined in ISO 6743-4 at temperatures ranging from -40 °C to +100 °C.
ISO 3949:2009 does not include requirements for end fittings. It is limited to the performance of hoses and hose assemblies.

Kunststoffschläuche und -schlauchleitungen - Textilverstärkte Typen für hydraulische Anwendungen - Spezifikationen (ISO 3949:2009)

Diese Internationale Norm legt Anforderungen für drei Typen von textilverstärkten thermoplastischen Schläuchen und Schlauchleitungen mit einer Nenngröße von 3,2 bis 25 fest. Abhängig von den Anforde-rungen an die elektrische Leitfähigkeit ist jeder Typ in zwei Klassen unterteilt. Sie sind für den Gebrauch mit den in ISO 6743-4 festgelegten wasserbasierten hydraulischen Flüssigkeiten HFC, HFAE, HFAS und HFB in einem Temperaturbereich von 0 °C bis +60 °C und den in ISO 6743-4 festgelegten ölbasierten hydraulischen Flüssigkeiten HH, HL, HM, HR und HV in einem Temperaturbereich von −40 °C bis +100 °C geeignet.
Diese Internationale Norm enthält keine Anforderungen an Endarmaturen. Sie beschränkt sich auf die Leistung von Schläuchen und Schlauchleitungen.
ANMERKUNG Betriebstemperaturen über 100 °C können die Lebensdauer des Schlauches wesentlich verkürzen.

Tuyaux et flexibles en plastique - Types hydrauliques avec armature textile - Spécifications (ISO 3949:2009)

ISO 3949:2009 spécifie les exigences pour trois types de tuyaux et assemblages flexibles thermoplastiques avec armature textile de dimension nominale de 3,2 à 25. Chaque type est divisé en deux classes dépendant des exigences relatives à la conductibilité électrique. Ils sont destinés à être utilisés avec des fluides hydrauliques à base d'eau, HFC, HFAE, HFAS et HFB tels que définis dans l'ISO 6743‑4 pour une plage de températures de 0 °C à +60 °C, et avec des fluides hydrauliques à base de pétrole HH, HL, HM, HR et HV tels que définis dans l'ISO 6743‑4 pour une plage de températures de −40 °C à +100 °C.
La présente Norme internationale ne contient pas d'exigences sur les extrémités de raccordement. Elle se limite aux performances des tuyaux et assemblages flexibles.
NOTE Des températures d'utilisation supérieures à 100 °C peuvent réduire matériellement la durée de vie du tuyau.

Polimerne cevi in cevni priključki - S tekstilom ojačene vrste za hidravlično uporabo - Specifikacija (ISO 3949:2009)

Standard EN ISO 3949 določa zahteve za tri vrste s tekstilom ojačenih termoplastičnih cevi in cevnih priključkov z nazivno velikostjo od 3,2 do 25. Vsaka vrsta je glede na zahteve električne prevodnosti razdeljena v dva razreda. Primerne so za uporabo s hidravličnimi tekočinami na vodni osnovi HFC, HFAE, HFAS in HFB, kot je definirano v standardu ISO 6743-4, pri temperaturah med 0 °C do +60 °C, in za uporabo s hidravličnimi tekočinami na oljni osnovi HH, HL, HM, HR in HV, kot je definirano v standardu ISO 6743-4, pri temperaturah od -40 °C do +100 °C. Zahteve za končnike v tem mednarodnem standardu niso vključene. Standard je omejen na učinkovitost cevi in cevnih priključkov.

General Information

• Status: Withdrawn
• Publication Date: 29-Jul-2014
• Withdrawal Date: 24-Jul-2018
• ICS: 23.040.70 - Hoses and hose assemblies
• ICS: 23.100.40 - Piping and couplings
• ICS: 83.140.40 - Hoses
• Technical Committee: CEN/TC 218 - Rubber and plastics hoses and hose assemblies
• Drafting Committee: CEN/TC 218/WG 2 - Rubber and plastics hoses and hose assemblies for hydraulic applications
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 25-Jul-2018
• Ref Project: SIST EN ISO 3949:2014 - Plastics hoses and hose assemblies - Textile-reinforced types for hydraulic applications - Specification (ISO 3949:2009)

Relations

• Replaces: EN 855:1996 - Plastics hoses and hose assemblies - Thermoplastics textile reinforced hydraulic type - Specification
• Effective Date: 26-Dec-2012
• Replaced By: EN ISO 3949:2018 - Plastics hoses and hose assemblies - Textile-reinforced types for hydraulic applications - Specification (ISO 3949:2018)
• Effective Date: 17-Dec-2014

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 3949:2014
01-oktober-2014
1DGRPHãþD
SIST EN 855:2000
3ROLPHUQHFHYLLQFHYQLSULNOMXþNL6WHNVWLORPRMDþHQHYUVWH]DKLGUDYOLþQR
XSRUDER6SHFLILNDFLMD,62
Plastics hoses and hose assemblies - Textile-reinforced types for hydraulic applications -
Specification (ISO 3949:2009)
Kunststoffschläuche und -schlauchleitungen - Textilverstärkte Typen für hydraulische
Anwendungen - Spezifikation (ISO 3949:2009)
Tuyaux et flexibles en plastique - Types hydrauliques avec armature textile -
Spécifications (ISO 3949:2009)
Ta slovenski standard je istoveten z: EN ISO 3949:2014
ICS:
83.120 2MDþDQLSROLPHUL Reinforced plastics
83.140.40 Gumene cevi Hoses
SIST EN ISO 3949:2014 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 3949:2014

---------------------- Page: 2 ----------------------

SIST EN ISO 3949:2014

EUROPEAN STANDARD
EN ISO 3949

NORME EUROPÉENNE

EUROPÄISCHE NORM
July 2014
ICS 23.100.40; 83.140.40 Supersedes EN 855:1996
English Version
Plastics hoses and hose assemblies - Textile-reinforced types
for hydraulic applications - Specification (ISO 3949:2009)
Tuyaux et flexibles en plastique - Types hydrauliques avec Kunststoffschläuche und -schlauchleitungen -
armature textile - Spécifications (ISO 3949:2009) Textilverstärkte Typen für hydraulische Anwendungen -
Spezifikationen (ISO 3949:2009)
This European Standard was approved by CEN on 24 July 2014.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2014 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 3949:2014 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 3949:2014
EN ISO 3949:2014 (E)
Contents Page
Foreword .3
2

---------------------- Page: 4 ----------------------

SIST EN ISO 3949:2014
EN ISO 3949:2014 (E)
Foreword
The text of ISO 3949:2009 has been prepared by Technical Committee ISO/TC 45 “Rubber and rubber
products” of the International Organization for Standardization (ISO) and has been taken over as EN
ISO 3949:2014 by Technical Committee CEN/TC 218 “Rubber and plastics hoses and hose assemblies” the
secretariat of which is held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by January 2015, and conflicting national standards shall be withdrawn at
the latest by January 2015.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 855:1996.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
Endorsement notice
The text of ISO 3949:2009 has been approved by CEN as EN ISO 3949:2014 without any modification.
3

---------------------- Page: 5 ----------------------

SIST EN ISO 3949:2014

---------------------- Page: 6 -----
...