EN 12080:2007/FprA1

Railway applications - Axleboxes - Rolling bearings

This European Standard specifies the quality parameters of axlebox rolling bearings, required for reliable operation of trains on European networks. It covers metallurgical and material properties as well as geometric and dimensional characteristics. It also defines methods for quality assurance and conditions for approval of the products.

Bahnanwendungen - Radsatzlager - Wälzlager

Applications ferroviaires - Boîtes d'essieux - Roulements

Železniške naprave - Ohišja ležajev kolesnih dvojic - Kotalni ležaji - Dopolnilo A1

General Information

• Status: Not Published
• ICS: 21.100.20 - Rolling bearings
• ICS: 45.040 - Materials and components for railway engineering
• Technical Committee: CEN/TC 256 - Railway applications
• Drafting Committee: CEN/TC 256/SC 2/WG 12 - Roller bearings and Lubricants
• Current Stage: 5060 - Closure of Vote - Formal Approval
• Start Date: 13-Aug-2010
• Due Date: 24-Jun-2011
• Completion Date: 13-Aug-2010
• Directive: 2008/57/EC - Directive 2008/57/EC of the European Parliament and of the Council of 17 June 2008 on the interoperability of the rail system within the Community (Recast)
• Mandate: M/024 - Mandate to CEN/CENELEC/ETSI for programming and standardization in the field of railway equipment
• Mandate: M/334 - Mandate for programming and standardisation addressed to CEN, CENELEC and ETSI in the field of the Interoperability of the trans-european conventional rail system
• Ref Project: SIST EN 12080:2008/kFprA1:2010 - Railway applications - Axleboxes - Rolling bearings

Relations

• Merged Into: EN 12080:2007+A1:2010 - Railway applications - Axleboxes - Rolling bearings
• Effective Date: 19-Jan-2023
• Amends: EN 12080:2007 - Railway applications - Axleboxes - Rolling bearings
• Effective Date: 12-Dec-2009

Standards Content (Sample)

SLOVENSKI STANDARD
01-julij-2010
Železniške naprave - Ohišja ležajev kolesnih dvojic - Kotalni ležaji - Dopolnilo A1
Railway applications - Axleboxes - Rolling bearings
Bahnanwendungen - Radsatzlager - Wälzlager
Applications ferroviaires - Boîtes d'essieux - Roulements
Ta slovenski standard je istoveten z: EN 12080:2007/FprA1
ICS:
21.100.20 Kotalni ležaji Rolling bearings
45.040 Materiali in deli za železniško Materials and components
tehniko for railway engineering
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
FINAL DRAFT
EN 12080:2007
NORME EUROPÉENNE
EUROPÄISCHE NORM
FprA1
May 2010
ICS 45.040; 21.100.20
English Version
Railway applications - Axleboxes - Rolling bearings
Applications ferroviaires - Boîtes d'essieux - Roulements Bahnanwendungen - Radsatzlager - Wälzlager
This draft amendment is submitted to CEN members for unique acceptance procedure. It has been drawn up by the Technical Committee
CEN/TC 256.
This draft amendment A1, if approved, will modify the European Standard EN 12080:2007. If this draft becomes an amendment, CEN
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this amendment
into the relevant national standard without any alteration.

This draft amendment was established by CEN in three official versions (English, French, German). A version in any other language made
by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2010 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 12080:2007/FprA1:2010: E
worldwide for CEN national Members.

Contents Page
Foreword .3
1 Modification to the Foreword .4
2 Modification to Annex ZA, Annex ZA (informative) Relationship between this European
Standard and the Essential Requirements of EU Directive 2008/57/EC.5

Foreword
This document (EN 12080:2007/FprA1:2010) has been prepared by Technical Committee CEN/TC 256
“Railway applications”, the secretariat of which is held by DIN.
This document is currently submitted to the Unique Acceptance Procedure.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive(s).
For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this document.
1 Modification to the Foreword
Delete the third paragraph and replace it with the following:
"This document has been prepared under a mandate given to CEN/CENELEC/ETSI by the European
Commission and the European Free Trade Association, and supports essential requirements of EU Directive
2008/57/EC."
Delete the fourth paragraph and replace it with the following:
"For relationship with EU Directive 2008/57/EC, see informative Annex ZA, which is an integr
...