EN ISO 10140-5:2010

Acoustics - Laboratory measurement of sound insulation of building elements - Part 5: Requirements for test facilities and equipment (ISO 10140-5:2010)

ISO 10140-5:2010 specifies laboratory test facilities and equipment for sound insulation measurements of building elements, such as components and materials, building elements, technical elements (small building elements) and sound insulation improvement systems.

Akustik - Messung der Schalldämmung von Bauteilen im Prüfstand - Teil 5: Anforderungen an Prüfstände und Prüfeinrichtungen (ISO 10140-5:2010)

Dieser Teil der ISO 10140 legt Prüfstände und Prüfeinrichtungen für die Messung der Schalldämmung von
Bauteilen fest, zum Beispiel von:
⎯ Bauteilen und Baustoffen;
⎯ Bauteilen;
⎯ technischen Bauteilen (kleine Bauteile);
⎯ Systemen zur Verbesserung der Schalldämmung.
Er gilt für Prüfstände mit unterdrückter Schallabstrahlung von flankierenden Bauteilen und baulicher Trennung
zwischen Sende- und Empfangsraum.
Dieser Teil von ISO 10140 legt die Eignungsprüfungen fest, die anzuwenden sind, wenn ein neuer Prüfstand
mit Prüfeinrichtungen für Schalldämmungsmessungen in Betrieb genommen wird. Es ist vogesehen, dass
diese Verfahren in regelmäßigen Abständen wiederholt werden, um sicherzustellen, dass mit den
Prüfeinrichtungen und dem Prüfstand keine Probleme auftreten.

Acoustique - Mesurage en laboratoire de l'isolation acoustique des éléments de construction - Partie 5: Exigences relatives aux installations et appareillage d'essai (ISO 10140-5:2010)

L'ISO 10140-5:2010 spécifie les installations et l'appareillage d'essai en laboratoire pour les mesurages de l'isolation acoustique des éléments de construction, tels que les composants et matériaux, les éléments de construction, les éléments techniques (petits éléments de construction) et les systèmes d'amélioration de l'isolation acoustique.

Akustika - Laboratorijsko merjenje zvočne izolirnosti gradbenih elementov - 5. del: Zahteve in oprema za laboratorije (ISO 10140-5:2010)

Ta del ISO 10140 določa laboratorije in opremo za merjenja zvočne izolirnosti gradbenih elementov, kot so: - komponente in materiali; - gradbeni elementi; - tehnični elementi (majhni gradbeni elementi); - sistemi za izboljšavo zvočne izolirnosti. Velja za laboratorije z zadušenim sevanjem iz bočnih elementov in strukturno izoliranost med virov in sobami za sprejem. Ta del ISO 10140 določa kvalifikacijske postopke, ki se uporabljajo pri začetku obratovanja novega laboratorija z opremo za merjenje zvočne izolirnosti. Njegov namen je, da se ti postopki redno ponavljajo, da se zagotovi odprava kakršnih koli težav z opremo ali z laboratorijem.

General Information

• Status: Withdrawn
• Publication Date: 31-Aug-2010
• Withdrawal Date: 04-May-2021
• ICS: 91.120.20 - Acoustics in building. Sound insulation
• Technical Committee: CEN/TC 126 - Acoustic properties of building products and of buildings
• Drafting Committee: CEN/TC 126/WG 1 - Methods for measuring the sound insulation of building elements and the acoustic performances of buildings
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 05-May-2021
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Directive: 89/106/EEC - Construction products
• Mandate: M/BC/CEN/91/8 - CPD: Protection against noise
• Ref Project: SIST EN ISO 10140-5:2010 - Acoustics - Laboratory measurement of sound insulation of building elements - Part 5: Requirements for test facilities and equipment (ISO 10140-5:2010)

Relations

• Replaces: EN ISO 140-11:2005 - Acoustics - Measurement of sound insulation in buildings and of building elements - Part 11: Laboratory measurements of the reduction of transmitted impact sound by floor coverings on lightweight reference floors (ISO 140-11:2005)
• Effective Date: 08-Jun-2022
• Replaces: EN ISO 140-16:2006 - Acoustics - Measurement of sound insulation in buildings and of building elements - Part 16: Laboratory measurement of the sound reduction index improvement by additional lining (ISO 140-16:2006)
• Effective Date: 08-Jun-2022
• Replaces: EN ISO 140-6:1998 - Acoustics - Measurement of sound insulation in buildings and of building elements - Part 6: Laboratory measurements of impact sound insulation of floors (ISO 140-6:1998)
• Effective Date: 08-Jun-2022
• Replaces: EN ISO 140-3:1995/A1:2004 - Acoustics - Measurement of sound insulation in buildings and of building elements - Part 3: Laboratory measurements of airborne sound insulation of building elements - Amendment 1: Installation guidelines for lightweight twin leaf partitions (ISO 140-3:1995/AM 1:2004)
• Effective Date: 08-Jun-2022
• Replaces: EN ISO 140-8:1997 - Acoustics - Measurement of sound insulation in buildings and of building elements - Part 8: Laboratory measurements of the reduction of transmitted impact noise by floor coverings on a heavyweight standard floor (ISO 140-8:1997)
• Effective Date: 08-Jun-2022
• Replaces: EN ISO 140-1:1997/A1:2004 - Acoustics - Measurement of sound insulation in buildings and of building elements - Part 1: Requirements for laboratory test facilities with suppressed flanking transmission - Amendment 1: Specific requirements on the frame of the test opening for lightweight twin leaf partitions (ISO 140-1:1997/AM 1:2004)
• Effective Date: 08-Jun-2022
• Replaces: EN 20140-10:1992 - Acoustics - Measurement of sound insulation in buildings and of building elements - Part 10: Laboratory measurement of airborne sound insulation of small building elements (ISO 140-10:1991)
• Effective Date: 08-Jun-2022
• Replaces: EN ISO 140-3:1995 - Acoustics - Measurement of sound insulation in buildings and of building elements - Part 3: Laboratory measurements of airborne sound insulation of building elements (ISO 140-3:1995)
• Effective Date: 08-Jun-2022
• Replaces: EN ISO 140-1:1997 - Acoustics - Measurement of sound insulation in buildings and of building elements - Part 1: Requirements for laboratory test facilities with suppressed flanking transmission (ISO 140-1:1997)
• Effective Date: 08-Jun-2022
• Replaced By: EN ISO 10140-5:2021 - Acoustics - Laboratory measurement of sound insulation of building elements - Part 5: Requirements for test facilities and equipment (ISO 10140-5:2021)
• Effective Date: 08-Jun-2022
• Amended By: EN ISO 10140-5:2010/A1:2014 - Acoustics - Laboratory measurement of sound insulation of building elements - Part 5: Requirements for test facilities and equipment - Amendment 1: Rainfall sound (ISO 10140-5:2010/Amd 1:2014)
• Effective Date: 08-Jun-2022

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Akustik - Messung der Schalldämmung von Gebäudeteilen im Prüfstand - Teil 5: Anforderungen an Prüfstände und Prüfeinrichtungen (ISO 10140-5:2010)Acoustique - Détermination de l'isolation acoustique des éléments de construction - Partie 5: Exigences pour installations et équipements d'essai (ISO 10140-5:2010)Acoustics - Laboratory measurement of sound insulation of building elements - Part 5: Requirements for test facilities and equipment (ISO 10140-5:2010)91.120.20L]RODFLMDAcoustics in building. Sound insulationICS:Ta slovenski standard je istoveten z:EN ISO 10140-5:2010SIST EN ISO 10140-5:2010en01-december-2010SIST EN ISO 10140-5:2010SLOVENSKI
STANDARDSIST EN ISO 140-3:1997/A1:2005SIST EN ISO 140-3:1997SIST EN ISO 140-8:1998SIST EN ISO 140-6:1999SIST EN ISO 140-16:2006SIST EN ISO 140-1:1998SIST EN 20140-10:1997SIST EN ISO 140-11:2005SIST EN ISO 140-1:1998/A1:20051DGRPHãþD



SIST EN ISO 10140-5:2010



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN ISO 10140-5
September 2010 ICS 91.120.20 Supersedes EN 20140-10:1992, EN ISO 140-1:1997, EN ISO 140-11:2005, EN ISO 140-16:2006, EN ISO 140-3:1995, EN ISO 140-6:1998, EN ISO 140-8:1997English Version
Acoustics - Laboratory measurement of sound insulation of building elements - Part 5: Requirements for test facilities and equipment (ISO 10140-5:2010)
Acoustique - Mesurage en laboratoire de l'isolation acoustique des éléments de construction - Partie 5: Exigences relatives aux installations et appareillage d'essai (ISO 10140-5:2010)
Akustik -Messung der Schalldämmung von Gebäudeteilen im Prüfstand - Teil 5: Anforderungen an Prüfstände und Prüfeinrichtungen (ISO 10140-5:2010) This European Standard was approved by CEN on 14 August 2010.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 10140-5:2010: ESIST EN ISO 10140-5:2010



EN ISO 10140-5:2010 (E) 2 Contents Page Foreword .3 SIST EN ISO 10140-5:2010



EN ISO 10140-5:2010 (E) 3 Foreword This document (EN ISO 10140-5:2010) has been prepared by Technical Committee ISO/TC 43 "Acoustics" in collaboration with Technical Committee CEN/TC 126 “Acoustic properties of building elements and of buildings” the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by March 2011, and conflicting national standards shall be withdrawn at the latest by March 2011. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document supersedes EN ISO 140-16:2006, EN 20140-10:1992, EN ISO 140-11:2005, EN ISO 140-1:1997, EN ISO 140-3:1995, EN ISO 140-8:1997, EN ISO 140-6:1998. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Endorsement notice The text of ISO 10140-5:2010 has been approved by CEN as a EN ISO 10140-5:2010 without any modification.
SIST EN ISO 10140-5:2010



SIST EN ISO 10140-5:2010



Reference numberISO 10140-5:2010(E)© ISO 2010
INTERNATI
...