EN 1386:2007

Aluminium and aluminium alloys - Tread plate - Specifications

This document specifies the technical conditions of inspection and delivery, the mechanical properties, the tolerances on dimensions and form of rolled semi-finished aluminium alloy products intended for floor plating, e.g. in vehicle construction, shipbuilding and metallic structures with a raised pattern on one side and a smooth surface on the other side.
It applies to sheets, strips and plates from 1,2 mm up to 20 mm in thickness and up to and including 2 500 mm in width, and to sheets and plates up to 14 000 mm in length.

Aluminium und Aluminiumlegierungen - Bleche mit eingewalzten Mustern - Spezifikationen

Dieses Dokument legt die technischen Lieferbedingungen, mechanischen Eigenschaften, Grenzabmaße und Formtoleranzen von Walzhalbzeug aus Aluminiumlegierungen mit einem eingewalzten, erhabenen Muster auf der einen Seite und einer glatten Fläche auf der anderen Seite fest, das für Bodenbleche vorgesehen ist, z. B. im Fahrzeug-, Schiffs- und Metallbau.
Es gilt für Bleche, Bänder und Platten mit einer Dicke von 1,2 mm bis 20 mm und einer Breite bis 2 500 mm sowie für Bleche und Platten mit einer Länge bis 14 000 mm.

Aluminium et alliages d'aluminium - Tôles relief - Spécifications

Le présent document spécifie les conditions techniques de contrôle et de livraison, propriétés mécaniques, tolérances dimensionnelles et autres prescriptions relatives aux tôles, bandes et tôles épaisses en aluminium et alliages d'aluminium corroyés, laminées à plat avec un motif en relief sur un côté et une surface lisse sur l'autre côté.
Elle s'applique aux tôles, bandes et tôles épaisses de 1,2 mm à 20 mm d'épaisseur et jusqu'à 2 500 mm de largeur, et aux tôles et tôles épaisses jusqu'à 14 000 mm de longueur.

Aluminij in aluminijeve zlitine - Pločevina z reliefnimi vzorci - Specifikacije

General Information

• Status: Published
• Publication Date: 10-Jul-2007
• Withdrawal Date: 30-Jan-2008
• ICS: 77.150.10 - Aluminium products
• Technical Committee: CEN/TC 132 - Aluminium and aluminium alloys
• Drafting Committee: CEN/TC 132/WG 7 - Sheets, strips and plates
• Current Stage: 9093 - Decision to confirm - Review Enquiry
• Completion Date: 19-Jun-2024
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Directive: 89/106/EEC - Construction products
• Mandate: M/120 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on structural metallic products and ancillaries
• Ref Project: SIST EN 1386:2007 - Aluminium and aluminium alloys - Tread plate - Specifications

Relations

• Replaces: EN 1386:1996 - Aluminium and aluminium alloys - Tread plate - Specifications
• Effective Date: 22-Dec-2008

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aluminium and aluminium alloys - Tread plate - SpecificationsAluminium et alliages d'aluminium - Tôles relief - SpécificationsAluminium und Aluminiumlegierungen - Bleche mit eingewalzten Mustern - SpezifikationenTa slovenski standard je istoveten z:EN 1386:2007SIST EN 1386:2007en77.150.10Aluminijski izdelkiAluminium productsICS:SIST EN 1386:19981DGRPHãþDSLOVENSKI
STANDARDSIST EN 1386:200701-december-2007

EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 1386July 2007ICS 77.150.10Supersedes EN 1386:1996
English VersionAluminium and aluminium alloys - Tread plate - SpecificationsAluminium et alliages d'aluminium - Tôles relief -SpécificationsAluminium und Aluminiumlegierungen - Bleche miteingewalzten Mustern - SpezifikationenThis European Standard was approved by CEN on 23 May 2007.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2007 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 1386:2007: E

Rules for rounding.21 Annex B (informative)
Explanation of temper designation used in Table 1 based on definitions of EN 515.22 Bibliography.23

Introduction It is essential that aluminium alloy semi-finished rolled products intended for use floor plating, e.g. in vehicle construction, shipbuilding and metallic structures satisfy a certain number of specific technical conditions for inspection and delivery as well as specific mechanical and other properties which distinguish them from similar semi-finished products for general applications.

Figure 1 — Two bar
Figure 2 — Five bar
Figure 3 — Diamond
Figure 4 — Rice grain Figure 5 —Almond 5 Selection of materials Appropriate material of the series 1000 (with a minimum aluminium content of 99,5 %), 3000, 5000, 6000 and 7000 can be used. Their chemical composition shall conform to EN 573-3. The following alloys are recommended for use as floor plating, e.g. in a vehicle construction, shipbuilding and metallic structures: EN AW-1050A, EN AW-3003, EN AW-3103, EN AW-5026, AW-5052, EN AW-5083, EN AW-5086, EN AW-5754, EN AW-6061, EN AW-6082 and EN AW-7020. NOTE For marine application with EN AW-5083 and EN AW-5086 in the H116 temper, 7.6 applies. 6 Order information The relevant requirements of EN 485-1 shall apply, with the following additional provisions: a) the order document shall refer to the present document; b) the order document should specify the type of the inspection document according to EN 10204 (see 8.2); c) the order document shall specify mechanical and other relevant properties, if they differ from those specified in the present standard or if materials other than those recommended in the present document are used; d) the order document should specify the height of the raised pattern (see 7.7.1) and the tolerances on thickness applicable (see 7.7.2). 7 Requirements 7.1 General With special regard to the final use, the supplier and the purchaser shall take into account additional legal regulation and standards and the suitability of the material chosen.

[Al 99,5] H244 6,0 20,0 105 145 75 - 5 8 - F ≥ 1,2 20,0 - - - - - - - ≥ 1,2 1,5 120 180 80 - 3 - 1 t 1,5 3,0 120 180 80 - 4 - 1,25 t 3,0 6,0 120 180 80 - 5 - 2 t H224 6,0 20,0 120 180 80 - 6 10 - ≥ 1,2 1,5 140 200 115 - 2 - 1 t 1,5 3,0 140 200 115 - 3 - 1,25 t 3,0 6,0 140 200 115 - 4 - 2 t EN AW-3003
[Al Mn1Cu] H244 6,0 20,0 140 200 110 - 5 7 - F ≥ 1,2 20,0 - - - - - - - ≥ 1,2 1,5 115 175 75 - 3 - 1,25 t 1,5 3,0 115 175 75 - 4 - 1,5 t 3,0 6,0 115 175 75 - 5 - 2,5 t H224 6,0 20,0 1
...