CEN ISO/TS 17263:2003
(Main)Automatic vehicle and equipment identification - Intermodal goods transport - System parameters (ISO/TS 17263:2003)
Automatic vehicle and equipment identification - Intermodal goods transport - System parameters (ISO/TS 17263:2003)
ISO/TS 17263:2003 establishes an AEI-System based on radio frequency technologies. This system is intended for general application in RTTT/TICS. It allows for the transfer of the identification codes and further information about equipment and vehicles used in intermodal transport into such RTTT/TICS and information systems related to Intermodal Transport processes. Within the intermodal context of the RTTT/TICS Sector, AEI systems have the specific objective of achieving an unambiguous identification of an ITU or related equipment or vehicle or item used in intermodal transport, and to make that identification automatically. Vehicles will be considered and handled under Intermodal aspects as "Intermodal Equipment". Therefore a differentiation between AEI and AVI systems under the purpose of ISO/TS 17263:2003 is not required.
ISO/TS 17263:2003 is specifically aimed at DSRC-type air interfaces. The requirement and test methods may not apply for Intermodal AEI systems using long range communications such as Cellular Networks or Satellite, or vicinity communication such as inductively coupled antennas. The interoperability across the air interface (reference point Delta) is outside the scope of ISO/TS 17263:2003.
The aim of ISO/TS 17263:2003 is to define, describe and specify the System Parameters related to an intermodal AEI system to provide an enabling Standard, which, whilst allowing the system specifier to determine the performance levels and operating conditions, provides a framework for interoperability. Therefore ISO/TS 17263:2003 specifies:
parameters and requirements of the identification system itself;
performance criteria necessary to ensure consistent and reliable operation of AEI systems within international transport processing;
requirements of the performance and the position of the electronic devices (tag) when installed on intermodal equipment;
requirements for the installation of readers, and performance data related to these components.
Automatische Identifizierung von Fahrzeugen und Ausrüstungen - Kombinierter Güterverkehr - Systemparameter (ISO/TS 17263:2003)
Identification automatique des véhicules et des équipements - Transport intermodal de marchandises - Paramètres des systèmes (ISO/TS 17263:2003)
Samodejna identifikacija vozil in opreme – Intermodalni prevoz blaga – Sistemski parametri (ISO/TS 17263:2003)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST-TS CEN ISO/TS 17263:2003
01-oktober-2003
Samodejna identifikacija vozil in opreme – Intermodalni prevoz blaga – Sistemski
parametri (ISO/TS 17263:2003)
Automatic vehicle and equipment identification - Intermodal goods transport - System
parameters (ISO/TS 17263:2003)
Automatische Identifizierung von Fahrzeugen und Ausrüstungen - Kombinierter
Güterverkehr - Systemparameter (ISO/TS 17263:2003)
Identification automatique des véhicules et des équipements - Transport intermodal de
marchandises - Parametres des systemes (ISO/TS 17263:2003)
Ta slovenski standard je istoveten z: CEN ISO/TS 17263:2003
ICS:
03.220.20 Cestni transport Road transport
35.240.60 Uporabniške rešitve IT v IT applications in transport
transportu in trgovini and trade
SIST-TS CEN ISO/TS 17263:2003 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST-TS CEN ISO/TS 17263:2003
---------------------- Page: 2 ----------------------
SIST-TS CEN ISO/TS 17263:2003
TECHNICAL SPECIFICATION
CEN ISO/TS 17263
SPÉCIFICATION TECHNIQUE
TECHNISCHE SPEZIFIKATION
June 2003
ICS 35.240.60
English version
Automatic vehicle and equipment identification – Intermodal
goods transport – System parameters (ISO/TS 17263:2003)
Identification automatique des véhicules et des
équipements – Transport intermodal de marchandises –
Paramètres des systèmes (ISO/TS 17263:2003)
This Technical Specification (CEN/TS) was approved by CEN on 25 November 2002 for provisional application.
The period of validity of this CEN/TS is limited initially to three years. After two years the members of CEN will be requested to submit their
comments, particularly on the question whether the CEN/TS can be converted into a European Standard.
CEN members are required to announce the existence of this CEN/TS in the same way as for an EN and to make the CEN/TS available. It
is permissible to keep conflicting national standards in force (in parallel to the CEN/TS) until the final decision about the possible
conversion of the CEN/TS into an EN is reached.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2003 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN ISO/TS 17263:2003 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST-TS CEN ISO/TS 17263:2003
CEN ISO/TS 17263:2003 (E)
Contents
1 Scope .4
1.1 General.4
1.2 Aim .4
1.3 Pre-requisite .5
2 Normative references.5
3 Terms and definitions .6
4 Symbols and abbreviations.7
5 System architecture and specification.7
5.1 Generic specification.7
5.2 Architecture and data structure of elements .8
6 Requirements and parameters.8
6.1 Basic rules.8
6.1.1 Purpose.8
6.1.2 Da
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.