EN 15507:2008
(Main)Packaging - Transport packaging for dangerous goods - Comparative material testing of polyethylene grades
Packaging - Transport packaging for dangerous goods - Comparative material testing of polyethylene grades
This European Standard specifies material parameters, test requirements and procedures for the comparative testing of grades of high molecular weight high density polyethylene (PE-HD-HMW) and medium molecular weight high density polyethylene (PE-HD-MMW), used for the manufacture of packagings and IBCs for the transport of dangerous goods. It is intended to be used in conjunction with selective testing for packagings for liquids. The standard is not intended to be used for comparative testing of recycled plastics material.
NOTE This European Standard is intended to be used in conjunction with one or more of the international regulations set out in the Bibliography.
Verpackung - Verpackungen zur Beförderung gefährlicher Güter - Vergleichende Werkstoffprüfung von Polyethylensorten
Diese Europäische Norm legt Werkstoffkennwerte, Prüfanforderungen und Prüfverfahren für die
vergleichende Prüfung von Sorten hochmolekularen Polyethylens hoher Dichte (High Density Polyethylene –
PE-HD-HMW) und mittelmolekularen Polyethylens hoher Dichte (High Density Polyethylene – PE-HD-MMW),
für die Herstellung von Verpackungen und Großpackmitteln (IBC) für die Beförderung gefährlicher Güter fest.
Es ist vorgesehen, sie in Verbindung mit der selektiven Prüfung von Verpackungen für flüssige Stoffe
anzuwenden. Die Norm ist nicht für die vergleichende Prüfung von Recycling-Kunststoffen vorgesehen.
ANMERKUNG Diese Europäische Norm ist dafür gedacht, in Verbindung mit einer oder mehreren der in den Literaturhinweisen
aufgeführten internationalen Vorschriften angewendet zu werden.
Emballage - Emballages pour le transport des marchandises dangereuses - Essais comparatifs de diverses qualités de polyéthylène
La présente Norme européenne spécifie les paramètres des matériaux, les exigences et les modes opératoires d’essai permettant de procéder à des essais comparatifs des qualités de polyéthylène haute densité à poids moléculaire élevé (HDPE-HMW) et de polyéthylène haute densité à poids moléculaire moyen (HDPE-MMW) utilisées pour la fabrication d’emballages et de grands récipients pour vrac (GRV) destinés au transport de marchandises dangereuses. Elle est destinée à être associée à des essais sélectifs d’emballages de liquides. La norme n’est pas destinée aux essais comparatifs de matières plastiques recyclées.
NOTE 1 La présente Norme européenne est destinée à être associée à une ou plusieurs réglementations internationales mentionnées dans la Bibliographie.
Embalaža - Transportna embalaža za nevarne snovi - Preskušanje in primerjava kakovosti polietilena
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Embalaža - Transportna embalaža za nevarne snovi - Preskušanje in primerjava kakovosti polietilenaVerpackung - Verpackungen zur Beförderung gefährlicher Güter - Vergleichende Werkstoffprüfung von PolyethylensortenEmballage - Emballages pour le transport des marchandises dangereuses - Essais comparatifs de diverses qualités de polyéthylenePackaging - Transport packaging for dangerous goods - Comparative material testing of polyethylene grades55.040SDNLUDQMHPackaging materials and accessories13.300Varstvo pred nevarnimi izdelkiProtection against dangerous goodsICS:Ta slovenski standard je istoveten z:EN 15507:2008SIST EN 15507:2009en,fr,de01-marec-2009SIST EN 15507:2009SLOVENSKI
STANDARD
SIST EN 15507:2009
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 15507December 2008ICS 13.300; 55.040 English VersionPackaging - Transport packaging for dangerous goods -Comparative material testing of polyethylene gradesEmballage - Emballages pour le transport desmarchandises dangereuses - Essais comparatifs dediverses qualités de polyéthylèneVerpackung - Verpackungen zur Beförderung gefährlicherGüter - Vergleichende Werkstoffprüfung vonPolyethylensortenThis European Standard was approved by CEN on 8 November 2008.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2008 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 15507:2008: ESIST EN 15507:2009
EN 15507:2008 (E) 2 Contents Page Foreword .3 1 Scope .5 2 Normative references .5 3 Terms and definitions .5 4 Test requirements .6 4.1 General .6 4.2 Melt flow rate .6 4.3 Density .6 4.4 Low temperature notched impact strength .7 4.5 Environmental stress crack resistance .7 4.6 Molecular degradation .7 4.7 Test report .8 5 Test specimens .8 5.1 Selection of test materials .8 5.2 Test sheet preparation .8 6 Facilities for testing .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.