EN ISO 16495:2013
(Main)Packaging - Transport packaging for dangerous goods - Test methods (ISO 16495:2013)
Packaging - Transport packaging for dangerous goods - Test methods (ISO 16495:2013)
ISO 16495:2013 specifies the information needed for the design type testing of packaging, Intermediate Bulk Containers ( IBCs) and large packaging intended for use in the transport of dangerous goods.
Verpackung - Verpackungen zur Beförderung gefährlicher Güter - Prüfverfahren (ISO 16495:2013)
Diese Internationale Norm legt Informationen für die Bauartprüfungen von Verpackungen, Großpackmitteln (en: Intermediate Bulk Containers (IBC)) und Großverpackungen fest, die zum Transport gefährlicher Güter vorgesehen sind.
ANMERKUNG 1 Diese Internationale Norm kann nur in Verbindung mit einer oder mehreren der in den Literaturhinweisen aufgeführten internationalen Vorschriften angewandt werden.
ANMERKUNG 2 Der Begriff "„Verpackungen“" bezieht Verpackungen für die Klasse 6.2 infektiöse Stoffe nach den Vereinten Nationen ein.
Emballages - Emballages de transport pour marchandises dangereuses - Méthodes d'essai (ISO 16495:2013)
L'ISO 16495:2013 spécifie les informations nécessaires aux essais de modèle type relatifs aux emballages, aux grands récipients pour vrac (GRV) et aux grands emballages destinés à être utilisés pour le transport de marchandises dangereuses.
Embalaža - Transportna embalaža za nevarno blago - Preskusne metode (ISO 16495:2013)
Ta mednarodni standard določa informacije, potrebne za tipsko preskušanje zasnove embalaže, vmesnih vsebnikov (IBC) in večje embalaže, namenjene za uporabo pri prevozu nevarnega blaga. OPOMBA 1: Ta mednarodni standard se lahko uporablja v povezavi z enim ali več mednarodnimi predpisi iz poglavja Bibliografija. OPOMBA 2: Izraz »embalaža« zajema embalažo za infektivne snovi razreda 6.2 v skladu z opredelitvijo Združenih narodov.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-januar-2014
1DGRPHãþD
SIST EN ISO 16104:2003
SIST EN ISO 16467:2003
Embalaža - Transportna embalaža za nevarno blago - Preskusne metode (ISO
16495:2013)
Packaging - Transport packaging for dangerous goods - Test methods (ISO 16495:2013)
Verpackung - Verpackungen zur Beförderung gefährlicher Güter - Prüfverfahren (ISO
16495:2013)
Emballages - Emballages de transport pour marchandises dangereuses - Méthodes
d'essai (ISO 16495:2013)
Ta slovenski standard je istoveten z: EN ISO 16495:2013
ICS:
13.300 Varstvo pred nevarnimi Protection against dangerous
izdelki goods
55.020 Pakiranje in distribucija blaga Packaging and distribution of
na splošno goods in general
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN ISO 16495
NORME EUROPÉENNE
EUROPÄISCHE NORM
August 2013
ICS 13.300; 55.020
English Version
Packaging - Transport packaging for dangerous goods - Test
methods (ISO 16495:2013)
Emballages - Emballages de transport pour marchandises Verpackung - Verpackungen zur Beförderung gefährlicher
dangereuses - Méthodes d'essai (ISO 16495:2013) Güter - Prüfverfahren (ISO 16495:2013)
This European Standard was approved by CEN on 12 July 2013.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2013 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 16495:2013: E
worldwide for CEN national Members.
Contents Page
Foreword .3
Foreword
This document (EN ISO 16495:2013) has been prepared by Technical Committee ISO/TC 122 "Packaging" in
collaboration with Technical Committee CEN/TC 261 “Packaging” the secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by February 2014, and conflicting national standards shall be withdrawn
at the latest by February 2014.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
Endorsement notice
The text of ISO 16495:2013 has been approved by CEN as EN ISO 16495:2013 without any modification.
INTERNATIONAL ISO
STANDARD 16495
First edition
2013-08-01
Corrected version
2013-09-01
Packaging — Transport packaging for
dangerous goods — Test methods
Emballages — Emballages de transport pour marchandises
dangereuses — Méthodes d’essai
Reference number
ISO 16495:2013(E)
©
ISO 2013
ISO 16495:2013(E)
© ISO 2013
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2013 – All rights reserved
ISO 16495:2013(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Test report . 2
5 Selection and preparation of packaging, IBCs and large packaging for testing .2
5.1 Selection of packaging, IBCs and large packaging . 2
5.2 Information to be provided with packaging, IBCs and large packaging . 2
5.3 Selection of contents and filling of packaging, IBCs and large packaging prior to testing . 3
5.4 Closing packaging, IBCs and large packaging . 5
5.5 Check of design type specification with requirements . 6
5.6 Conformity check of test samples with design type specification . 6
6 Test methods . 7
7 Facilities for testing . 7
7.1 General requirements . 7
7.2 Accuracy of measurement equipment . 7
7.3 Accuracy of measurements in testing . 8
7.4 Climatic conditions . 8
Annex A (normative) Test report . 9
Annex B (normative) Packaging specifications .11
Annex C (normative) IBC specifications .22
Annex D (normative) Large packaging specifications .29
Annex E (informative) Type of contents .32
Annex F (normative) Drop test .33
Annex G (normative) Leakproofness test .36
Annex H (normative) Hydraulic pressure test.38
Annex I (normative) Stacking test .40
Annex J (normative) Water spray test .44
Annex K (normative) Bottom lift test .45
Annex L (normative) Top lift test .46
Annex M (normative) Tear test .47
Annex N (normative) Topple test .48
Annex O (normative) Righting test .49
Annex P (normative) Puncture test .50
Annex Q (normative) Vibration test .51
Bibliography .52
ISO 16495:2013(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2. www.iso.org/directives
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received. www.iso.org/patents
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
The committee responsible for this document is CEN/TC 261, Packaging, in collaboration with Technical
Committee ISO/TC 122, Packaging, Subcommittee SC 3, Performance requirements and tests for means of
packaging, packages and unit loads in accordance with the Agreement on tech
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.