iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 12663-1:2010+A1:2014/prA2

(Amendment)

Railway applications - Structural requirements of railway vehicle bodies - Part 1: Locomotives and passenger rolling stock (and alternative method for freight wagons)

Railway applications - Structural requirements of railway vehicle bodies - Part 1: Locomotives and passenger rolling stock (and alternative method for freight wagons)

revised Annexe ZA

Bahnanwendungen - Festigkeitsanforderungen an Wagenkästen von Schienenfahrzeugen - Teil 1: Lokomotiven und Personenfahrzeuge (und alternatives Verfahren für Güterwagen)

Applications ferroviaires - Prescriptions de dimensionnement des structures de véhicules ferroviaires - Partie 1 : Locomotives et matériels roulants voyageurs (et méthode alternative pour wagons)

Železniške naprave - Konstrukcijske zahteve za grode železniških vozil - 1. del: Lokomotive in potniška železniška vozila (tudi alternativna metoda za tovorne vagone) - Dopolnilo A2

General Information

Status
Not Published
Publication Date
17-Apr-2024
ICS
45.060.20 - Trailing stock
Technical Committee
CEN/TC 256 - Railway applications
Drafting Committee
CEN/TC 256/WG 2 - Structural requirements
Current Stage
4599 - Dispatch of FV draft to CMC - Finalization for Vote
Start Date
30-Mar-2023
Due Date
12-Sep-2021
Completion Date
30-Mar-2023
Directive
2008/57/EC - Directive 2008/57/EC of the European Parliament and of the Council of 17 June 2008 on the interoperability of the rail system within the Community (Recast)
2016/797/EU - Directive (EU) 2016/797 of the European Parliament and of the Council of 11 May 2016 on the interoperability of the rail system within the European Union (Text with EEA relevance)
Mandate
M/483 - Mandate for programming and standardisation addressed to the European standardisation bodies under directive 2008/57/EC in the field of the interoperability of the rail system within the European Union
M/591 - Standardisation request to the European Committee for Standardisation and the European Committee for Electrotechnical Standardisation as regards railway products in support of Directive (EU) 2016/797
Ref Project
SIST EN 12663-1:2010+A1:2015/oprA2:2021 - Railway applications - Structural requirements of railway vehicle bodies - Part 1: Locomotives and passenger rolling stock (and alternative method for freight wagons)

Relations

Amends
EN 12663-1:2010+A1:2014 - Railway applications - Structural requirements of railway vehicle bodies - Part 1: Locomotives and passenger rolling stock (and alternative method for freight wagons)
Effective Date
01-Jan-2020

Buy Standard

EN 12663-1:2010+A1:2015/oprA2:2021EN 12663-1:2010+A1:2015/oprA2:2021
PreviousNext
Amendment
EN 12663-1:2010+A1:2015/oprA2:2021
English language
6 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 12663-1:2010+A1:2015/oprA2:2021
01-september-2021
Železniške naprave - Konstrukcijske zahteve za grode železniških vozil - 1. del:
Lokomotive in potniška železniška vozila (tudi alternativna metoda za tovorne
vagone) - Dopolnilo A2

Railway applications - Structural requirements of railway vehicle bodies - Part 1:

Locomotives and passenger rolling stock (and alternative method for freight wagons)

Bahnanwendungen - Festigkeitsanforderungen an Wagenkästen von
Schienenfahrzeugen - Teil 1: Lokomotiven und Personenfahrzeuge (und alternatives
Verfahren für Güterwagen)

Applications ferroviaires - Prescriptions de dimensionnement des structures de véhicules

ferroviaires - Partie 1 : Locomotives et matériels roulants voyageurs (et méthode

alternative pour wagons)
Ta slovenski standard je istoveten z: EN 12663-1:2010+A1:2014/prA2
ICS:
45.060.20 Železniški vagoni Trailing stock
SIST EN 12663- en,fr,de
1:2010+A1:2015/oprA2:2021

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 12663-1:2010+A1:2015/oprA2:2021
---------------------- Page: 2 ----------------------
SIST EN 12663-1:2010+A1:2015/oprA2:2021
DRAFT
EUROPEAN STANDARD
EN 12663-
NORME EUROPÉENNE
1:2010+A1:2014
EUROPÄISCHE NORM
prA2
July 2021
ICS 45.060.20
English Version
Railway applications - Structural requirements of railway
vehicle bodies - Part 1: Locomotives and passenger rolling
stock (and alternative method for freight wagons)

Applications ferroviaires - Prescriptions de Bahnanwendungen - Festigkeitsanforderungen an

dimensionnement des structures de véhicules Wagenkästen von Schienenfahrzeugen - Teil 1:

ferroviaires - Partie 1 : Locomotives et matériels Lokomotiven und Personenfahrzeuge (und alternatives

roulants voyageurs (et méthode alternative pour Verfahren für Güterwagen)
wagons)

This draft amendment is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 256.

This draft amendment A2, if approved, will modify the European Standard EN 12663-1:2010+A1:2014. If this draft becomes an

amendment, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for

inclusion of this amendment into the relevant national standard without any alteration.

This draft amendment was established by CEN in three official versions (English, French, German). A version in any other

language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC

Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,

Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,

Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and

United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are

aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without

notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels

© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 12663-1:2010+A1:2014/prA2:2021

worldwide for CEN national Members. E
---------------------- Page: 3 ----------------------
SIST EN 12663-1:2010+A1:2015/oprA2:2021
EN 12663-1:2010+A1:2014/prA2:2021 (E)
Contents Page

European foreword ............................................................................................................................................. 3

1 Modification to Clause 2, “Normative references” .................................................................... 4

2 Modification to 6.1, “General” ........................................................................................................... 4

3 Modification to 6.2.2, “Longitudinal forces in buffers and/or coupling area” ................ 4

4 Modification to 6.3.4, “Re-railing and recovery ......................................................................... 4

5 Modification to 8.2.2, “Test procedure” ........................................................................................ 4

6 Changes Annex ZA, Relationship between this European Standard and the Essential

Requirements of EU Directive 2016/797/EC .............................................................................. 4

Annexe ZA (informative) Relationship between this European Standard and the Essential

Requirements of EU Directive 2016/797/EC .............................................................................. 5

---------------------- Page: 4 ----------------------
SIST EN 12663-1:2010+A1:2015/oprA2:2021
EN 12663-1:2010+A1:2014/prA2:2021 (E)
European foreword

This document (EN 12663-1:2010+A1:2014/prA2:2021) has been prepared by Technical Committee

CEN/TC 256 “Railway applications”, the secretariat of which is held by DIN.
This document is currently submitted to the CEN enquiry.

This document has been prepared under a standardization request addressed to CEN by the European

Commission, and it aims to support essential or other requirements of EU Directive(s) or Regulation(s).

For relationship with EU Directive(s) or Regulation(s), see informative Annex ZA which is an integral part

of this document.
---------------------- Page: 5 ----------------------
SIST EN 12663-1:2010+A1:2015/oprA2:2021
EN 12663-1:2010+A1:2014/prA2:2021 (E)
1 Modification to Clause 2, “Normative references”
Replace the current list of references with the following:
EN 13749:2021, Railway applications - Wheelset
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 16116-1:2022(Main)
Railway applications - Design requirements for steps, handrails and associated access for staff - Part 1: Passenger vehicles, vans and locomotives
SIST EN 16116-1:2022

This document specifies the minimum ergonomic and structural integrity requirements for steps and handrails used by staff to access the following heavy rail vehicles:
—   passenger vehicles;
—   vans;
—   locomotives;
—   power units of rolling stock;
—   passenger-rated car carriers.
This document defines the required spaces necessary for shunter handrails and shunter’s stand and gives references for the required spaces necessary for handling of screw couplings with side buffers. For staff access, it defines footsteps, handrails and their dimensions and free spaces. To fulfil the requirements for loads which are applied by the staff, it defines dimensions and requirements for materials or design loads.
This document also defines the general requirements of steps and handrail for access to external equipment, for example windscreens, wipers or external lights.

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16334-1:2014+A1:2022(Main + Amendment)
Railway applications - Passenger Alarm System - Part 1: System requirements for mainline rail
SIST EN 16334-1:2014+A1:2022

This European Standard specifies the characteristics of the Passenger Alarm System. The aim of the Passenger Alarm System is to:
a)   permit passengers in case of emergency situations to inform the driver;
b)   permit the driver to keep the train moving or to stop the train at a safe location;
c)   stop the train automatically:
1)   at a platform,
2)   if there is no acknowledgement by the driver.
This European Standard covers the Passenger Alarm System (PAS) fitted to the passenger carrying rolling stock and specifies:
-   the functional requirements for an alarm triggered in the driving cab (Clause 6);
-   the communication channel between the driver and passengers or on-board staff (6.4);
-   the dynamic analysis of the Passenger Alarm System (Clause 7);
-   the requirements for the degraded modes management (Clause 8);
-   the safety related requirements (Clause 9);
-   requirements for the Passenger Alarm Device and Passenger Alarm Device area (Clause 10).
This European Standard is applicable to rolling stock which are in the field of the Directive 2008/57/EC.
NOTE 1   Existing Passenger Alarm Systems may require modification to work in conjunction with vehicles that comply with this standard.
NOTE 2   Most of the requirements of UIC 541–6 are compliant with this standard.
Other communications systems named 'communication device for passengers' or 'call for aid' in the CR LOC and PAS TSI [1] are not covered by this standard.
NOTE 3    prEN 16683, Railway applications Call for aid and communication device Requirements covers these aspects.

  • Standard
    35 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 15528:2021(Main)
Railway applications - Line categories for managing the interface between load limits of vehicles and infrastructure
SIST EN 15528:2022

This document is applicable to the lines with standard track gauge (1 435 mm) and wider track gauges of the heavy rail system  and the vehicles that are operated on these lines. This includes machines used for construction, maintenance, inspection, repair and renewal when they are operated in running mode, but not, when they are in working or travelling mode.
This document specifies methods of classification of existing and new lines of the heavy rail system and the categorization of rail vehicles.
This document gives guidance to a reliable and established management of the interface between rail vehicles and the heavy rail network and does not impose any requirements on either vehicles or infrastructure.
The application of this document enables to ensure the static route compatibility between a rail vehicle and the heavy rail network with respect to the vertical load carrying capacity.
It contains requirements relevant to:
—   classification of the vertical load carrying capacity of lines of the heavy rail network;
—   allocation of rail vehicles to line categories (categorization);
—   determination of payload limits of freight wagons.
This document does not apply to:
—   assessments of compatibility based on the parameter axle load alone;
—   compatibility checks for cases where an additional dynamic analysis is required (for example according to EN 1991 2);
—   requirements relating to the maximum total mass or maximum length of a train;
—   the system used in Great Britain, where all lines and vehicles are classified in accordance with the RA (Route Availability) System. A guide to the equivalent line categories in accordance with this European Standard is given in Annex F;
—   the publication of line categories.
The requirements of this document do not replace any regulations related to running behaviour of vehicles described by the assessment quantities for running safety, track loading and ride characteristics (see EN 14363).

  • Standard
    74 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    77 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16116-2:2021(Main)
Railway applications - Design requirements for steps, handrails and associated access for staff - Part 2: Freight wagons
SIST EN 16116-2:2021

This document specifies the minimum requirements for ergonomic and structural integrity of steps and handrails used together to give staff access to freight wagons. It does not cover ladders, top platforms and top gangways.
It defines in particular the required spaces necessary for shunter handrails, for shunter’s stand, for steps and handrails.
This document also defines their dimensions, positions, limits for durability and functionality.
It also defines the general requirements for the access to tail lights for freight wagons.

  • Standard
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17285:2020(Main)
Railway applications - Acoustics - Measuring of door audible warnings
SIST EN 17285:2020

This document specifies procedures to assess acoustic signals at passenger external doors applying to all kind of rolling stock. The following applies to this standard:
-   this document refers to acoustical passenger information indicating the release, opening and closing of passenger doors;
-   this document is applicable to tonal signals with defined frequency components levels and pulse sequences;
-   this document is not applicable to spoken information or to signals comprising a sequence of impulses (such as a door finding signal).
NOTE   Acoustic door signals are defined in EN 16584 2 "Design for PRM use".

  • Standard
    36 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16334-2:2020(Main)
Railway applications - Passenger alarm system - Part 2: System requirements for urban rail
SIST EN 16334-2:2020

This document specifies the characteristics of the Passenger Alarm System (PAS) for Urban Rail.
This document covers the PAS fitted to the passenger carrying Urban Rail rolling stock and specifies:
- the safety related requirements;
- the functional requirements of PAS triggered by passengers;
- the requirements for the communication channel between passengers and the driver or Operations Control Centre (OCC);
- the requirements for the functional behaviour of the PAS;
- the requirements for the degraded modes management;
- the requirements for the Passenger Alarm Device (PAD) and PAD area.
This document is applicable to the categories I to III of Urban Rail rolling stock defined in CEN/CLC Guide 26:
- (I) metros;
- (II) trams;
- (III) light rail.
NOTE 1   CEN/CLC Guide 26 defines Metro, Tram and Light Rail as public transport systems permanently guided at least by one rail, intended for the operation of local, urban and suburban passenger services with self-propelled vehicles and operated either segregated or not from general road and pedestrian traffic.
NOTE 2   The PAS function on existing vehicles may require modification to work in conjunction with vehicles that comply with this document.
NOTE 3   This document covers urban rail rolling stock, both with or without a driver.
NOTE 4   For rolling stock devoted to suburban passenger services, this document applies when the TSIs do not apply.

  • Standard
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16860:2019(Main)
Railway applications - Requirements and general principles for securing payload in rail freight transport
SIST EN 16860:2019

This document specifies the minimum requirements for securing payload to ensure safe operation of freight wagons, utilizing a train speed of up to 120 km/h. It is serving as a basis for the design and implementation of payload securing methods.
Additional requirements in the case of wagons designed for the transport of special payload and/or with integrated load security (e.g. tank wagons, hopper wagons, car carriers, coil carriers and wagons for intermodal transport) are not part of this document.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16922:2017+A1:2019(Main + Amendment)
Railway applications - Ground based services - Vehicle waste water discharge equipment
SIST EN 16922:2018+A1:2019

This European Standard specifies the interface requirements for controlled emission toilet equipment on railway vehicles and the infrastructure, including catering area sink waste retention tanks. Vehicle and infrastructure specific requirements are also given.
The European Standard includes fixed and portable infrastructure equipment used to empty retention tanks, but excludes equipment fitted to railway vehicles where no fixed connections are used between vehicle and infrastructure.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16989:2018(Main)
Railway applications - Fire protection on railway vehicles - Fire behaviour test for a complete seat
SIST EN 16989:2018

This document sets out a test protocol to determine the burning behaviour of a rail vehicle seat design using a set of complete seats prepared and tested according to the procedures given in this document. It also sets out a standardized procedure to assess a seat’s potential for vandalization.
This document describes:
-   fire test method;
-   test equipment specification;
-   protocol for test specification procedure;
-   vandalization procedure;
-   calibration procedure.

  • Standard
    60 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16586-2:2017(Main)
Railway applications - Design for PRM use - Accessibility of persons with reduced mobility to rolling stock - Part 2: Boarding aids
SIST EN 16586-2:2017

This European Standard describes the specific ‘Design for PRM use’ requirements applying to rolling stock and the assessment of those requirements. The following applies to this standard:
-   the definitions and requirements describe specific aspects of ‘Design for PRM use’ required by persons with disabilities and persons with reduced mobility as defined in the PRM TSI;
-   this standard defines elements which are universally valid for obstacle free travelling including steps for access and egress and boarding aids. The definitions and requirements of this standard are to be used for rolling stock applications;
-   this standard only refers to aspects of accessibility for PRM passengers it does not define general requirements and general definitions;
-   this standard assumes that the vehicle is in the defined operating condition;
-   where minimum or maximum dimensions are quoted these are absolute NOT nominal.
The ‘Accessibility of persons with reduced mobility’ standard is written in two parts:
-   Part 1 contains:
-   steps for access and egress.
-   this document is Part 2 and contains:
-   boarding aids.

  • Standard
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day