Liquid petroleum products - Petrol - Determination of low lead concentrations by atomic absorption spectrometry

This document specifies an atomic absorption spectrometric test method for the determination of the lead content of petrol in the range 2,5 mg/l to 10,0 mg/l. This test method is independent of the lead alkyl type.
NOTE 1   Annex A describes an alternative procedure but with a poorer precision for the determination of the lead content of petrol in the range 3,0 mg/l to 10,0 mg/l. This procedure is also independent of the lead alkyl type.
NOTE 2   For the purposes of this document, the term "% (V/V)" is used to represent the volume fraction.
WARNING - The use of this document may involve hazardous materials, operations and equipment. This standard does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Flüssige Mineralölerzeugnisse - Ottokraftstoff - Bestimmung von niedrigen Bleigehalten durch Atomabsorptionspektrometrie

Dieses Dokument legt ein Verfahren zur Bestimmung des Bleigehaltes von Ottokraftstoffen im Bereich von 2,5 mg/l bis 10,0 mg/l fest. Dieses Verfahren ist von der Art der Bleialkyl-Verbindungen unabhängig.
ANMERKUNG 1   In Anhang A ist ein alternatives Verfahren für die Bestimmung des Bleigehaltes im Bereich von 3,0 mg/l bis 10,0 mg/l, jedoch mit schlechterer Präzision, angegeben. Auch dieses Verfahren ist von der Art der Bleialkyl-Verbindungen unabhängig.
ANMERKUNG 2   Für die Anwendung dieses Dokument wird (% V/V) für Volumenanteile in Prozent verwendet.
WARNUNG - Die Anwendung dieses Dokument kann den Einsatz gefährlicher Stoffe, Arbeitsgänge und Geräte mit sich bringen. Diese Norm gibt nicht vor, alle mit ihren Anwendungen verbundenen Sicherheitsprobleme anzusprechen. Der Anwender dieser Norm ist dafür verantwortlich, vorher angemessene Maßnahmen zu ergreifen und die Anwendbarkeit einschränkender Vorschriften zu ermitteln.

Produits pétroliers liquides - Essence - Détermination des basses teneurs en plomb par spectrométrie d'absorption atomique

Le présent document prescrit une méthode de détermination de la teneur en plomb dans l'essence par spectrométrie d'absorption atomique, dans le domaine de concentration 2,5 mg/l à 10,0 mg/l. Cette méthode d'essai est indépendante du type d'alkyl de plomb.
NOTE 1   L'Annexe A décrit un mode opératoire alternatif pour la détermination de la teneur en plomb dans l'essence dans le domaine de concentration 3,0 mg/l à 10,0 mg/l, mais avec une fidélité moins bonne. Ce mode opératoire alternatif est également indépendant du type d'alkyl de plomb.
NOTE 2   Dans le cadre du présent document, l'expression "% (V/V)" est utilisée pour représenter la fraction volumique d'un matériau.
AVERTISSEMENT - L'utilisation du présent document implique l'intervention de produits, d'opérations et d'équipements à caractère dangereux. La présente Norme européenne n'est pas censée aborder tous les problèmes de sécurité concernés par son usage. Il est de la responsabilité de l'utilisateur de consulter et d'établir des règles de sécurité et d'hygiène appropriées et de déterminer l'applicabilité des restrictions réglementaires avant utilisation.

Tekoči naftni proizvodi - Bencin - Določevanje nizkih koncentracij svinca z atomsko absorpcijsko spektrometrijo

General Information

Status
Published
Publication Date
21-Sep-2004
Withdrawal Date
30-Mar-2005
Current Stage
9093 - Decision to confirm - Review Enquiry
Completion Date
03-Dec-2019

Relations

Buy Standard

Standard
EN 237:2004
English language
11 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Flüssige Mineralölerzeugnisse - Ottokraftstoff - Bestimmung von niedrigen Bleigehalten durch AtomabsorptionspektrometrieProduits pétroliers liquides - Essence - Détermination des basses teneurs en plomb par spectrométrie d'absorption atomiqueLiquid petroleum products - Petrol - Determination of low lead concentrations by atomic absorption spectrometry75.160.20Liquid fuelsICS:Ta slovenski standard je istoveten z:EN 237:2004SIST EN 237:2004en01-november-2004SIST EN 237:2004SLOVENSKI
STANDARDSIST EN 237:19981DGRPHãþD



SIST EN 237:2004



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 237September 2004ICS 75.160.20Supersedes EN 237:1996
English versionLiquid petroleum products - Petrol - Determination of low leadconcentrations by atomic absorption spectrometryProduits pétroliers liquides - Essence - Détermination desbasses teneurs en plomb par spectrométrie d'absorptionatomiqueFlüssige Mineralölerzeugnisse - Ottokraftstoff -Bestimmung von niedrigen Bleigehalten durchAtomabsorptionspektrometrieThis European Standard was approved by CEN on 9 July 2004.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2004 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 237:2004: ESIST EN 237:2004



EN 237:2004 (E) 2 Contents page Foreword.3 1 Scope.4 2 Normative references.4 3 Principle.4 4 Reagents and materials.5 5 Apparatus.6 6 Sampling.6 7 Procedure.6 7.1 General preparation.6 7.2 Preparation of calibration solutions (0,25 mg/l, 0,50 mg/l, 0,75 mg/l, and 1,0 mg/l of lead).6 7.3 Preparation of the test solution.7 7.4 Preparation of instrument.7 7.5 Determination.7 8 Calculation.7 9 Expression of results.8 10 Precision.
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.