Machinery for forestry - Safety requirements and testing for pole-mounted powered pruners - Part 2: Machines for use with backpack power source (ISO 11680-2:2021)

This document specifies safety requirements and measures for their verification for the design and construction of portable, hand-held, pole-mounted powered pruners with a backpack power unit (hereafter referred to as “machine”). These machines use a power transmission shaft to transmit power to a cutting attachment consisting of a combination of saw-chain and guide bar, a reciprocating saw blade or a single-piece circular saw blade with a 205 mm maximum outside diameter. Methods for the elimination or reduction of hazards arising from the use of these machines and the type of information on safe working practices to be provided by the manufacturer are specified.
This document, together with the relevant sections of ISO 11680-1:2021, deals with all significant hazards, hazardous situations or hazardous events, with the exception of electric shock from contact with overhead electric lines (apart from warnings and advices for inclusion in the instructions) and whole-body vibration from the backpack power unit, relevant to these machines when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer.
NOTE 1   A standardized test procedure for measuring whole-body vibration from the backpack power unit is not available at the date of publication.
NOTE 2   See Annex A for a list of significant hazards.
This document is applicable to portable, hand-held, pole-mounted powered pruners with backpack power unit manufactured after its date of publication.

Forstmaschinen - Sicherheitstechnische Anforderungen und Prüfung für motorbetriebene Hochentaster - Teil 2: Maschinen für den Gebrauch mit rückentragbarer Antriebseinheit (ISO 11680-2:2021)

Dieses Dokument enthält sicherheitstechnische Anforderungen sowie Maßnahmen zu deren Überprüfung für die Gestaltung und Konstruktion von tragbaren, Hand gehaltenen, motorbetriebenen Hochentastern mit rückentragbarer Antriebseinheit (nachfolgend als „Maschine“ bezeichnet). Diese Maschinen verwenden eine Antriebswelle zur Übertragung der Energie auf die Schneidgarnitur, die aus einer Kombination einer Sägekette und Führungsschiene, einem sich hin und her bewegenden Sägeblatt oder einem Kreissägeblatt mit einem Außendurchmesser von höchstens 205 mm besteht. Verfahren für die Beseitigung oder Verringerung von Gefährdungen werden festgelegt, die durch den Einsatz der Maschinen entstehen, sowie die Art der Informationen für sichere Arbeitsweisen, die vom Hersteller zur Verfügung zu stellen sind.
Dieses Dokument, zusammen mit den relevanten Abschnitten von ISO 11680-1:2021, behandelt alle signifikanten Gefährdungen, Gefährdungssituationen oder Gefährdungsereignisse, mit Ausnahme von elektrischem Schlag durch Kontakt mit oberirdischen Stromleitungen (abgesehen von Warnhinweisen und Empfehlungen zur Aufnahme in die Betriebsanleitung) und den von der rückentragbaren Antriebseinheit ausgehenden Ganzkörperschwingungen, die für diese Maschinen relevant sind, sofern sie zu dem vorgegebenen Zweck und bei vernünftigerweise durch den Hersteller vorhersehbarem Missbrauch eingesetzt werden.
ANMERKUNG 1   Ein standardisiertes Prüfverfahren zur Messung der Ganzkörperschwingungen, die von der rückentragbaren Antriebseinheit ausgehen, ist zum Ausgabedatum nicht verfügbar.
ANMERKUNG 2   Siehe Anhang A zur Liste der signifikanten Gefährdungen.
Dieses Dokument ist anzuwenden für tragbare, Hand gehaltene, motorbetriebene Hochentaster mit rückentragbarer Antriebseinheit, die nach dessen Ausgabedatum hergestellt worden sind.

Matériel forestier - Exigences de sécurité et essais pour les perches élagueuses à moteur - Partie 2: Machines pour utilisation avec source motrice portée à dos (ISO 11680-2:2021)

Le présent document spécifie les exigences de sécurité, et les mesures pour leur vérification, pour la conception et la construction des perches élagueuses portatives à moteur, équipées d'une source motrice portée à dos et fonctionnant avec un arbre de transmission pour alimenter le dispositif de coupe consistant en une chaîne de scie, lame de scie alternative ou lame de scie circulaire monobloc d'un diamètre extérieur maximal de 205 mm (ci-après appelées «machines »). Elle spécifie des méthodes pour éliminer ou réduire les phénomènes dangereux inhérents à l’utilisation de ces machines et le type d'informations devant être fournies par le fabricant sur les pratiques d'utilisation sûre.
Le présent document, conjointement avec les sections pertinentes de l'ISO 11680-1:2021, traite de tous les phénomènes dangereux significatifs, situations dangereuses ou événements dangereux, à l'exception du choc électrique engendré par un contact avec des lignes électriques aériennes (en dehors des avertissements et conseils à inclure dans la notice d'instructions) et des vibrations transmises à l'ensemble du corps par la source motrice portée à dos, pertinents pour ces machines lorsqu’elles sont utilisées normalement et dans des conditions de mauvais usage raisonnablement prévisibles par le fabricant.
NOTE 1   Aucun mode opératoire d'essai normalisé permettant de mesurer les vibrations transmises à l'ensemble du corps par la source motrice portée à dos n'est disponible à la date de publication.
NOTE 2   Voir l'Annexe A pour la liste des phénomènes dangereux significatifs.
Le présent document est applicable aux perches élagueuses à moteur portatives, équipées d'une source motrice portée à dos, fabriquées après sa date de publication.

Gozdarski stroji - Zahteve za varnost in preskušanje motornih žag za obvejevanje z drogom - 2. del: Stroji z ločenim ali nahrbtnim motornim pogonom (ISO 11680-2:2021)

Ta dokument določa varnostne zahteve in ukrepe za njihovo preverjanje za načrtovanje ter izdelavo prenosnih, ročnih motornih žag za obvejevanje z drogom z ločenim ali nahrbtnim motornim pogonom (v nadaljevanju: »stroj«). Ti stroji uporabljajo pogonsko gred za prenos moči
do nastavka za rezanje, ki ga sestavljajo veriga žage in vodilo, recipročno rezilo žage ali krožno rezilo žage v enem kosu z največjim zunanjim premerom 205 mm. Predpisane so metode
za odpravljanje ali zmanjšanje tveganj, ki izhajajo iz uporabe teh strojev, in vrsta informacij
o varnih delovnih praksah, ki jih mora zagotoviti proizvajalec.
Ta dokument poleg ustreznih razdelkov standarda ISO 11680-1:2021 opisuje vsa večja tveganja, nevarne situacije ali dogodke v zvezi s temi stroji, razen električnega udara zaradi stika z nadzemnimi električnimi kabli (vsebuje le opozorila in nasvete, ki morajo biti vključeni v navodila) in vibriranja celotnega telesa zaradi nahrbtnega motornega pogona, kadar se uporabljajo v skladu z
njihovim namenom in pod pogoji pričakovane nepravilne uporabe, ki jih določa proizvajalec.
OPOMBA 1: Na datum objave dokumenta standardiziran preskusni postopek za merjenje vibracij celotnega telesa zaradi nahrbtnega motornega pogona ni na voljo.
OPOMBA 2: Za seznam večjih tveganj glej dodatek A.
Ta dokument se uporablja za prenosne, ročne motorne žage za obvejevanje z drogom z ločenim ali nahrbtnim motornim pogonom, izdelane po datumu njegove izdaje.

General Information

Status
Published
Publication Date
23-Nov-2021
Withdrawal Date
30-May-2022
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
24-Nov-2021
Completion Date
24-Nov-2021

Relations

Buy Standard

Standard
EN ISO 11680-2:2022
English language
16 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN ISO 11680-2:2020
English language
11 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 11680-2:2022
01-januar-2022
Nadomešča:
SIST EN ISO 11680-2:2012
Gozdarski stroji - Zahteve za varnost in preskušanje motornih žag za obvejevanje
z drogom - 2. del: Stroji z ločenim ali nahrbtnim motornim pogonom (ISO 11680-
2:2021)
Machinery for forestry - Safety requirements and testing for pole-mounted powered
pruners - Part 2: Machines for use with backpack power source (ISO 11680-2:2021)
Forstmaschinen - Sicherheitstechnische Anforderungen und Prüfung für motorbetriebene
Hochentaster - Teil 2: Maschinen für den Gebrauch mit rückentragbarer Antriebseinheit
(ISO 11680-2:2021)
Matériel forestier - Exigences de sécurité et essais pour les perches élagueuses à
moteur - Partie 2: Machines pour utilisation avec source motrice portée à dos (ISO
11680-2:2021)
Ta slovenski standard je istoveten z: EN ISO 11680-2:2021
ICS:
65.060.80 Gozdarska oprema Forestry equipment
SIST EN ISO 11680-2:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 11680-2:2022

---------------------- Page: 2 ----------------------
SIST EN ISO 11680-2:2022


EN ISO 11680-2
EUROPEAN STANDARD

NORME EUROPÉENNE

November 2021
EUROPÄISCHE NORM
ICS 65.060.80; C Supersedes EN ISO 11680-2:2011
English Version

Machinery for forestry - Safety requirements and testing
for pole-mounted powered pruners - Part 2: Machines for
use with backpack power source (ISO 11680-2:2021)
Matériel forestier - Exigences de sécurité et essais pour Forstmaschinen - Sicherheitstechnische
les perches élagueuses à moteur - Partie 2: Machines Anforderungen und Prüfung für motorbetriebene
pour utilisation avec source motrice portée à dos (ISO Hochentaster - Teil 2: Maschinen für den Gebrauch mit
11680-2:2021) rückentragbarer Antriebseinheit (ISO 11680-2:2021)
This European Standard was approved by CEN on 9 October 2021.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 11680-2:2021 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN ISO 11680-2:2022
EN ISO 11680-2:2021 (E)
Contents Page
European foreword . 3
Annex ZA (informative) Relationship between this European Standard and the essential
requirements of Directive 2006/42/EC aimed to be covered . 4

2

---------------------- Page: 4 ----------------------
SIST EN ISO 11680-2:2022
EN ISO 11680-2:2021 (E)
European foreword
This document (EN ISO 11680-2:2021) has been prepared by Technical Committee ISO/TC 23 "Tractors
and machinery for agriculture and forestry" in collaboration with Technical Committee CEN/TC 144
“Tractors and machinery for agriculture and forestry” the secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by May 2022, and conflicting national standards shall be
withdrawn at the latest by May 2022.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 11680-2:2011.
This document has been prepared under a Standardization Request given to CEN by the European
Commission and the European Free Trade Association, and supports essential req
...

SLOVENSKI STANDARD
oSIST prEN ISO 11680-2:2020
01-april-2020
Gozdarski stroji - Zahteve za varnost in preskušanje motornih žag za obvejevanje
z drogom - 2. del: Stroji z ločenim ali nahrbtnim motornim pogonom (ISO/DIS
11680-2:2020)
Machinery for forestry - Safety requirements and testing for pole-mounted powered
pruners - Part 2: Machines for use with back-pack power source (ISO/DIS 11680-2:2020)
Forstmaschinen - Sicherheitstechnische Anforderungen und Prüfung für motorbetriebene
Hochentaster - Teil 2: Maschinen für den Gebrauch mit rückentragbarer Antriebseinheit
(ISO/DIS 11680-2:2020)
Matériel forestier - Exigences de sécurité et essais pour les perches élagueuses à
moteur - Partie 2: Machines pour utilisation avec source motrice portée à dos (ISO/DIS
11680-2:2020)
Ta slovenski standard je istoveten z: prEN ISO 11680-2
ICS:
65.060.80 Gozdarska oprema Forestry equipment
oSIST prEN ISO 11680-2:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 11680-2:2020

---------------------- Page: 2 ----------------------
oSIST prEN ISO 11680-2:2020
DRAFT INTERNATIONAL STANDARD
ISO/DIS 11680-2
ISO/TC 23/SC 17 Secretariat: SIS
Voting begins on: Voting terminates on:
2020-02-18 2020-05-12
Machinery for forestry — Safety requirements and testing
for pole-mounted powered pruners —
Part 2:
Machines for use with back-pack power source
Matériel forestier — Exigences de sécurité et essais pour les perches élagueuses à moteur —
Partie 2: Machines pour utilisation avec source motrice portée à dos
ICS: 65.060.80
THIS DOCUMENT IS A DRAFT CIRCULATED
This document is circulated as received from the committee secretariat.
FOR COMMENT AND APPROVAL. IT IS
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
ISO/CEN PARALLEL PROCESSING
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 11680-2:2020(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
©
PROVIDE SUPPORTING DOCUMENTATION. ISO 2020

---------------------- Page: 3 ----------------------
oSIST prEN ISO 11680-2:2020
ISO/DIS 11680-2:2020(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2020
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2020 – All rights reserved

---------------------- Page: 4 ----------------------
oSIST prEN ISO 11680-2:2020
ISO/DIS 11680-2:2020(E)

Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Safety requirements and / or protective measures . 2
4.1 General . 2
4.2 Hand grip on backpack power unit .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.