Acoustics - Laboratory measurement of sound insulation of building elements - Part 3: Measurement of impact sound insulation (ISO 10140-3:2021)

This document specifies laboratory methods for measuring the impact sound insulation of floor assemblies.
The test results can be used to compare the sound insulation properties of building elements, classify elements according to their sound insulation capabilities, help design building products which require certain acoustic properties and estimate the in situ performance in complete buildings.
The measurements are performed in laboratory test facilities in which sound transmission via flanking paths is suppressed. The results of measurements made in accordance with this document are not applicable directly to the field situation without accounting for other factors affecting sound insulation, such as flanking transmission, boundary conditions, and loss factor.
A test method is specified that uses the standard tapping machine (see ISO 10140-5:2021, Annex E) to simulate impact sources like human footsteps when a person is wearing shoes. Alternative test methods, using a modified tapping machine or a heavy/soft impact source (see ISO 10140-5:2021, Annex F) to simulate impact sources with strong low frequency components, such as human footsteps (bare feet) or children jumping, are also specified.
This document is applicable to all types of floors (whether heavyweight or lightweight) with all types of floor coverings. The test methods apply only to laboratory measurements.

Akustik - Messung der Schalldämmung von Bauteilen im Prüfstand - Teil 3: Messung der Trittschalldämmung (ISO 10140-3:2021)

Dieses Dokument legt Verfahren zur Messung der Trittschalldämmung von Deckenkonstruktionen im Prüf¬stand fest.
Die Prüfergebnisse können angewendet werden, um die Schalldämmeigenschaften von Bauteilen zu ver¬gleichen, Bauteile nach ihrer Schalldämmfähigkeit zu klassifizieren, die Konstruktion von Bauprodukten zu unterstützen, die bestimmte akustische Eigenschaften erfordern, und um die Eigenschaften im eingebauten Zustand im vollständigen Gebäude abzuschätzen.
Die Messungen werden in Laborprüfständen durchgeführt, in denen eine Schallübertragung über Flanken¬wege unterdrückt wird. Die Ergebnisse der nach diesem Dokument durchgeführten Messungen sind nicht direkt auf die Situation in der Praxis anwendbar, ohne dass andere Faktoren, wie Flankenübertragung, Rand¬bedingungen und Verlustfaktor, die die Schalldämmung beeinflussen, berücksichtigt werden.
Es wird ein Prüfverfahren festgelegt, bei dem das Norm-Hammerwerk (siehe ISO 10140 5:2021, Anhang E) verwendet wird, um Trittschallquellen, wie die Schritte einer Schuhe tragenden Person, nachzubilden. Alternative Prüfverfahren, bei denen ein modifiziertes Hammerwerk oder eine schwere/weiche Trittschall¬quelle (siehe ISO 10140 5:2021, Anhang F) verwendet wird, um Trittschallquellen mit starken tieffrequenten Komponenten, wie z. B. menschliche Schritte (barfuß) oder springende Kinder, nachzubilden, werden eben¬falls festgelegt.
Dieses Dokument ist anzuwenden für alle Arten von Decken (sowohl in schwerer als auch in leichter Aus¬führung) mit allen Arten von Deckenauflagen. Diese Prüfverfahren sind nur für Messungen im Prüfstand anzuwenden.

Acoustique - Mesurage en laboratoire de l'isolation acoustique des éléments de construction - Partie 3: Mesurage de l'isolation au bruit de choc (ISO 10140-3:2021)

Le présent document spécifie des méthodes de mesure en laboratoire de l’isolation au bruit de choc des planchers.
Les résultats d’essai peuvent être utilisés pour comparer les propriétés d’isolation acoustique des éléments de construction, classer ces éléments selon leurs aptitudes d’isolation acoustique, aider à concevoir des produits de construction nécessitant certaines propriétés acoustiques, et évaluer la performance in situ dans les bâtiments complets.
Les mesurages sont effectués dans des installations d’essai en laboratoire dans lesquelles la transmission acoustique par les voies latérales est supprimée. Les résultats des mesurages effectués conformément au présent document ne sont pas directement applicables in situ sans tenir compte d’autres facteurs qui influencent l’isolation acoustique, tels que la transmission latérale, les conditions limites et le facteur de perte.
Le présent document spécifie une méthode d’essai qui utilise la machine à chocs normalisée (voir l’ISO 10140-5:2021, Annexe E) pour simuler des sources de choc telles que les pas d’une personne portant des chaussures. Des méthodes d’essai alternatives, utilisant une machine à chocs modifiée ou une source de choc lourd/souple (voir l’ISO 10140-5:2021, Annexe F) pour simuler des sources de choc avec des composantes intenses en basses fréquences, telles que des pas humains (pieds nus) ou des sauts d’enfants, sont également spécifiées.
Le présent document s’applique à tous les types de planchers (lourd ou léger) avec tous les types de revêtements de sol. Les méthodes d’essai s’appliquent uniquement aux mesurages en laboratoire.

Akustika - Laboratorijsko merjenje zvočne izolirnosti gradbenih elementov - 3. del: Merjenje izolirnosti pred udarnim zvokom (ISO 10140-3:2021)

General Information

Status
Published
Publication Date
04-May-2021
Withdrawal Date
29-Nov-2021
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
05-May-2021
Completion Date
05-May-2021

Relations

Buy Standard

Standard
EN ISO 10140-3:2021
English language
24 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-september-2021
Nadomešča:
SIST EN ISO 10140-3:2010
SIST EN ISO 10140-3:2010/A1:2015
Akustika - Laboratorijsko merjenje zvočne izolirnosti gradbenih elementov - 3. del:
Merjenje izolirnosti pred udarnim zvokom (ISO 10140-3:2021)
Acoustics - Laboratory measurement of sound insulation of building elements - Part 3:
Measurement of impact sound insulation (ISO 10140-3:2021)
Akustik - Messung der Schalldämmung von Bauteilen im Prüfstand - Teil 3: Messung der
Trittschalldämmung (ISO 10140-3:2021)
Acoustique - Mesurage en laboratoire de l'isolation acoustique des éléments de
construction - Partie 3: Mesurage de l'isolation au bruit de choc (ISO 10140-3:2021)
Ta slovenski standard je istoveten z: EN ISO 10140-3:2021
ICS:
17.140.01 Akustična merjenja in Acoustic measurements and
blaženje hrupa na splošno noise abatement in general
91.060.01 Stavbni elementi na splošno Elements of buildings in
general
91.120.20 Akustika v stavbah. Zvočna Acoustics in building. Sound
izolacija insulation
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN ISO 10140-3
EUROPEAN STANDARD
NORME EUROPÉENNE
May 2021
EUROPÄISCHE NORM
ICS 91.120.20 Supersedes EN ISO 10140-3:2010
English Version
Acoustics - Laboratory measurement of sound insulation
of building elements - Part 3: Measurement of impact
sound insulation (ISO 10140-3:2021)
Acoustique - Mesurage en laboratoire de l'isolation Akustik - Messung der Schalldämmung von Bauteilen
acoustique des éléments de construction - Partie 3: im Prüfstand - Teil 3: Messung der Trittschalldämmung
Mesurage de l'isolation au bruit de choc (ISO 10140- (ISO 10140-3:2021)
3:2021)
This European Standard was approved by CEN on 24 April 2021.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 10140-3:2021 E
worldwide for CEN national Members.

Contents Page
European foreword . 3

European foreword
This document (EN ISO 10140-3:2021) has been prepared by Technical Committee ISO/TC 43
"Acoustics" in collaboration with Technical Committee CEN/TC 126 “Acoustic properties of building
elements and of buildings” the secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by November 2021, and conflicting national standards
shall be withdrawn at the latest by November 2021.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 10140-3:2010.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 10140-3:2021 has been approved by CEN as EN ISO 10140-3:2021 without any
modification.
INTERNATIONAL ISO
STANDARD 10140-3
Second edition
2021-04
Acoustics — Laboratory measurement
of sound insulation of building
elements —
Part 3:
Measurement of impact sound
insulation
Acoustique — Mesurage en laboratoire de l'isolation acoustique des
éléments de construction —
Partie 3: Mesurage de l'isolation au bruit de choc
Reference number
ISO 10140-3:2021(E)
©
ISO 2021
ISO 10140-3:2021(E)
© ISO 2021
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2021 – All rights reserved

ISO 10140-3:2021(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 2
4 Facilities and equipment . 2
5 Test procedure and evaluation . 3
5.1 General procedure . 3
5.2 Generation of sound field . 3
5.3 Data processing . 4
5.4 Correction of airborne sound transmission . 4
5.5 Expression of results . 5
6 Test arrangement . 5
6.1 General . 5
6.2 Types of installation . 6
6.2.1 Floor element . 6
6.2.2 Floor covering . 6
7 Limits of performance . 6
8 Measurement uncertainty . 6
9 Test report . 6
Annex A (informative) Measurement using a heavy and soft impact source .8
Annex B (informative) Form for the expression of results .12
Bibliography .15
ISO 10140-3:2021(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www .iso .org/ patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www .iso .org/
iso/ foreword .html.
This document was prepared by Technical Committee ISO/TC 43, Acoustics, Subcommittee SC 2,
Building acoustics, in collaboration with the European Committee for Standardization (CEN) Technical
Committee CEN/TC 126, Acoustic properties of building elements and of buildings, in accordance with the
Agreement on technical cooperation between ISO and CEN (Vienna Agreement).
This second edition cancels and replaces the first edition (ISO 10140-3:2010) and the Amendment
ISO 10140-3:2010/Amd 1:2015, which have been technically revised.
The main changes compared to the previous edition are as follows:
— all references in the text have been updated;
— in Clause 2, the normative references have been updated;
— in Clause 3, the terms and definitions have been updated;
— in 5.2, the third paragraph has been added;
— 5.4 a) and b) have been revised;
— in Clause 8, the title has been changed to “Measurement uncertainty”.
A list of all parts in the ISO 10140 series can be found on the ISO website.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www .iso .org/ members .html.
iv © ISO 2021 – All rights reserved

ISO 10140-3:2021(E)
Introduction
ISO 10140 (all parts) concerns laboratory measurement of the sound insulation of building elements
(see Table 1).
ISO 10140-1 specifies the application rules for specific elements and products, including specific
requirements for the prep
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.