EN ISO 16120-4:2011
(Main)Non-alloy steel wire rod for conversion to wire - Part 4: Specific requirements for wire rod for special applications (ISO 16120-4:2011)
Non-alloy steel wire rod for conversion to wire - Part 4: Specific requirements for wire rod for special applications (ISO 16120-4:2011)
ISO 16120-4:2011 is applicable to steel wire rod with improved characteristics intended for drawing and/or cold rolling.
Walzdraht aus unlegiertem Stahl zum Ziehen - Teil 4: Besondere Anforderungen an Walzdraht für Sonderanwendungen (ISO 16120-4:2011)
Dieser Teil der ISO 16120 gilt für Walzdraht mit erhöhten Anforderungen zum Ziehen und/oder Kaltwalzen.
Fil-machine en acier non allié destiné à la fabrication de fils - Partie 4: Exigences spécifiques au fil-machine pour applications spéciales (ISO 16120-4:2011)
L'ISO 16120-4:2011 est applicable au fil-machine en acier dont les caractéristiques ont été améliorées, destiné au tréfilage et/ou au laminage à froid.
Vroče valjana žica iz nelegiranega jekla za vlečenje in/ali hladno valjanje - 4. del: Posebne zahteve za žico za posebne namene (ISO 16120-4:2011)
Ta evropski standard opredeljuje žico z izboljšanimi lastnostmi, namenjeno vlečenju in/ali hladnemu valjanju.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 16120-4:2011
01-november-2011
1DGRPHãþD
SIST EN 10016-4:1997
9URþHYDOMDQDåLFDL]QHOHJLUDQHJDMHNOD]DYOHþHQMHLQDOLKODGQRYDOMDQMHGHO
3RVHEQH]DKWHYH]DåLFR]DSRVHEQHQDPHQH ,62
Non-alloy steel wire rod for conversion to wire - Part 4: Specific requirements for wire rod
for special applications (ISO 16120-4:2011)
Walzdraht aus unlegiertem Stahl zum Ziehen - Teil 4: Besondere Anforderungen an
Walzdraht für Sonderanwendungen (ISO 16120-4:2011)
Fil-machine en acier non allié destiné à la fabrication de fils - Partie 4: Exigences
spécifiques au fil-machine pour applications spéciales (ISO 16120-4:2011)
Ta slovenski standard je istoveten z: EN ISO 16120-4:2011
ICS:
77.140.65 Jeklene žice, jeklene vrvi in Steel wire, wire ropes and
verige link chains
SIST EN ISO 16120-4:2011 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 16120-4:2011
---------------------- Page: 2 ----------------------
SIST EN ISO 16120-4:2011
EUROPEAN STANDARD
EN ISO 16120-4
NORME EUROPÉENNE
EUROPÄISCHE NORM
July 2011
ICS 77.140.60 Supersedes EN 10016-4:1994
English Version
Non-alloy steel wire rod for conversion to wire - Part 4: Specific
requirements for wire rod for special applications (ISO 16120-
4:2011)
Fil-machine en acier non allié destiné à la fabrication de fils Walzdraht aus unlegiertem Stahl zum Ziehen - Teil 4:
- Partie 4: Exigences spécifiques au fil-machine pour Besondere Anforderungen an Walzdraht für
applications spéciales (ISO 16120-4:2011) Sonderanwendungen (ISO 16120-4:2011)
This European Standard was approved by CEN on 30 June 2011.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2011 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 16120-4:2011: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 16120-4:2011
EN ISO 16120-4:2011 (E)
Contents Page
Foreword .3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 16120-4:2011
EN ISO 16120-4:2011 (E)
Foreword
This document (EN ISO 16120-4:2011) has been prepared by Technical Committee ISO/TC 17 "Steel" in
collaboration with Technical Committee ECISS/TC 106 “Wire rod and wires” the secretariat of which is held by
AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by January 2012, and conflicting national standards shall be withdrawn at
the latest by January 2012.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 10016-4:1994.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 16120-4:2011 has been approved by CEN as a EN ISO 16120-4:2011 without any
modification.
3
---------------------- Page: 5 ----------------------
SIST EN ISO 16120-4:2011
----------------------
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.