EN ISO 13164-1:2020
(Main)Water quality - Radon-222 - Part 1: General principles (ISO 13164-1:2013, Correction version 2013-11-15)
Water quality - Radon-222 - Part 1: General principles (ISO 13164-1:2013, Correction version 2013-11-15)
ISO 13164-1:2013 gives general guidelines for sampling, packaging, and transporting of all kinds of water samples, for the measurement of the activity concentration of radon-222.
The test methods fall into two categories: a) direct measurement of the water sample without any transfer of phase (see ISO 13164‑2); b) indirect measurement involving the transfer of the radon-222 from the aqueous phase to another phase (see ISO 13164‑3).
The test methods can be applied either in the laboratory or on site.
The laboratory is responsible for ensuring the suitability of the test method for the water samples tested.
Wasserbeschaffenheit - Radon 222 - Teil 1: Grundlagen (ISO 13164-1:2013, korrigierte Fassung 2013-11-15)
Dieser Teil von ISO 13164 enthält allgemeine Leitlinien für die Probenahme, Verpackung und den Transport von Wasserproben aller Art zur Messung der Aktivitätskonzentration von Radon 222.
Die Prüfverfahren gliedern sich in zwei Kategorien:
a) direkte Messung der Wasserprobe ohne Phasenübergang (siehe ISO 13164 2);
b) indirekte Messung durch Übertragung des Radon 222 von der wässrigen Phase in eine andere Phase (siehe ISO 13164 3).
Die Prüfverfahren können entweder im Labor oder vor Ort angewendet werden.
Das Labor ist dafür verantwortlich, die Eignung dieses Prüfverfahrens für die zu prüfenden Wasserproben sicherzustellen.
Qualité de l'eau - Radon 222 - Partie 1: Principes généraux (ISO 13164-1:2013, Version corrigée 2013-11-15)
L'ISO 13164-1:2013 fournit des lignes directrices générales pour le prélèvement, le conditionnement et le transport d'échantillons d'eau de tous types, pour la mesure de l'activité volumique du radon 222.
Les méthodes de mesure relèvent de deux catégories: a) mesure directe de l'échantillon d'eau, sans transfert de phase (voir l'ISO 13164-2); b) mesure indirecte impliquant le transfert du radon 222 de la phase aqueuse vers une autre phase (voir l'ISO 13164-3).
Les méthodes d'essais peuvent être mises en oeuvre en laboratoire ou sur site.
Il est de la responsabilité du laboratoire de s'assurer de l'adéquation de la méthode d'essai aux échantillons d'eau soumis à essai.
Kakovost vode - Radon Rn-222 - 1. del: Splošna načela (ISO 13164-1:2013, popravljena izdaja 2013-11-15)
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
01-maj-2020
Kakovost vode - Radon Rn-222 - 1. del: Splošna načela (ISO 13164-1:2013,
popravljena izdaja 2013-11-15)
Water quality - Radon-222 - Part 1: General principles (ISO 13164-1:2013, Correction
version 2013-11-15)
Wasserbeschaffenheit - Radon 222 - Teil 1: Grundlagen (ISO 13164-1:2013, korrigierte
Fassung 2013-11-15)
Qualité de l'eau - Radon 222 - Partie 1: Principes généraux (ISO 13164-1:2013, Version
corrigée 2013-11-15)
Ta slovenski standard je istoveten z: EN ISO 13164-1:2020
ICS:
13.060.60 Preiskava fizikalnih lastnosti Examination of physical
vode properties of water
17.240 Merjenje sevanja Radiation measurements
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN ISO 13164-1
EUROPEAN STANDARD
NORME EUROPÉENNE
February 2020
EUROPÄISCHE NORM
ICS 13.060.60; 17.240; 13.280
English Version
Water quality - Radon-222 - Part 1: General principles (ISO
13164-1:2013, Correction version 2013-11-15)
Qualité de l'eau - Radon 222 - Partie 1: Principes Wasserbeschaffenheit - Radon 222 - Teil 1: Grundlagen
généraux (ISO 13164-1:2013, Version corrigée 2013- (ISO 13164-1:2013, korrigierte Fassung 2013-11-15)
11-15)
This European Standard was approved by CEN on 6 October 2019.
This European Standard was corrected and reissued by the CEN-CENELEC Management Centre on 11 March 2020.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATIO N
EUROPÄISCHES KOMITEE FÜR NORMUN G
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 13164-1:2020 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
European foreword
The text of ISO 13164-1:2013, Corrected version 2013-11-15 has been prepared by Technical
Committee ISO/TC 147 "Water quality” of the International Organization for Standardization (ISO) and
has been taken over as EN ISO 13164-1:2020 by Technical Committee CEN/TC 230 “Water analysis” the
secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by August 2020, and conflicting national standards shall
be withdrawn at the latest by August 2020.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 13164-1:2013, Corrected version 2013-11-15 has been approved by CEN as
INTERNATIONAL ISO
STANDARD 13164-1
First edition
2013-09-01
Corrected version
2013-11-15
Water quality — Radon-222 —
Part 1:
General principles
Qualité de l’eau — Radon 222 —
Partie 1: Principes généraux
Reference number
ISO 13164-1:2013(E)
©
ISO 2013
ISO 13164-1:2013(E)
© ISO 2013
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2013 – All rights reserved
ISO 13164-1:2013(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms, definitions, and symbols . 2
3.1 Terms and definitions . 2
3.2 Symbols . 4
4 Principle of the measurement method . 5
5 Sampling . 6
6 Transportation and storage . 6
7 Test sample preparation . 8
7.1 Degassing techniques . 8
7.2 Permeation technique . 9
7.3 Liquid extraction technique . 9
8 Detection techniques . 9
8.1 Gamma-spectrometry . 9
8.2 Silver-activated zinc sulfide ZnS(Ag) scintillation . 9
8.3 Air ionization . 9
8.4 Semiconductor (alpha-detection).10
8.5 Liquid scintillation .10
9 Measurement methods .10
9.1 General .10
9.2 Gamma-spectrometry method .10
9.3 Emanometric method .10
9.4 Liquid scintillation counting methods (LSC) .12
9.5 Permeation method .12
10 Calibration .12
11 Quality assurance and quality control programme .12
11.1 General .12
11.2 Influence quantities .12
11.3 Instrument verification.13
11.4 Method verification .13
11.5 Demonstration of analyst capability .13
12 Expression of results .13
13 Test report .13
Annex A (informative) Radon and its decay products in water .15
Annex B (informative) Examples of data record forms .19
Bibliography .23
ISO 13164-1:2013(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2, www.iso.org/directives.
Attention is drawn to the possibility that
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.