EN ISO 9241-306:2008
(Main)Ergonomics of human-system interaction - Part 306: Field assessment methods for electronic visual displays (ISO 9241-306:2008)
Ergonomics of human-system interaction - Part 306: Field assessment methods for electronic visual displays (ISO 9241-306:2008)
ISO 9241-306:2008 establishes optical, geometrical and visual inspection methods for the assessment of a display in various contexts of use according to ISO 9241‑303.
Ergonomie der Mensch-System-Interaktion - Teil 306: Vor-Ort-Bewertungsverfahren für elektronische optische Anzeigen (ISO 9241-306:2008)
In diesem Teil von ISO 9241 werden optische, geometrische und visuelle Prüfverfahren festgelegt, die zur
Bewertung einer Anzeige unter unterschiedlichen Einsatzbedingungen entsprechend ISO 9241-303
angewendet werden können.
Ergonomie de l'interaction homme-système - Partie 306: Méthodes d'appréciation sur le terrain des écrans de visualisation électroniques (ISO 9241-306:2008)
L‘ISO 9241-306:2008 établit les méthodes d'ajustement optique, géométrique et visuel pour l'évaluation d'un dispositif d'affichage dans divers contextes d'utilisation conformément à l'ISO 9241-303.
Ergonomija medsebojnega vpliva človek-sistem - 306. del: Metode ocenjevanja polja elektronskih slikovnih zaslonov (ISO 9241-306:2008)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-januar-2009
(UJRQRPLMDPHGVHERMQHJDYSOLYDþORYHNVLVWHPGHO 0HWRGHRFHQMHYDQMD
SROMDHOHNWURQVNLKVOLNRYQLK]DVORQRY ,62
Ergonomics of human-system interaction - Part 306: Field assessment methods for
electronic visual displays (ISO 9241-306:2008)
Ergonomie der Mensch-System-Interaktion - Teil 306: Vor-Ort-Bewertungsverfahren für
elektronische optische Anzeigen (ISO 9241-306:2008)
Ergonomie de l'interaction homme/systeme - Partie 306: Méthodes d'appréciation du
champ pour écrans visuels électroniques (ISO 9241-306:2008)
Ta slovenski standard je istoveten z: EN ISO 9241-306:2008
ICS:
13.180 Ergonomija Ergonomics
35.180 Terminalska in druga IT Terminal and other
periferna oprema IT peripheral equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN ISO 9241-306
NORME EUROPÉENNE
EUROPÄISCHE NORM
November 2008
ICS 13.180; 35.180
English Version
Ergonomics of human-system interaction - Part 306: Field
assessment methods for electronic visual displays (ISO 9241-
306:2008)
Ergonomie de l'interaction homme-système - Partie 306: Ergonomie der Mensch-System-Interaktion - Teil 306: Vor-
Méthodes d'appréciation sur le terrain des écrans de Ort-Bewertungsverfahren für elektronische optische
visualisation électroniques (ISO 9241-306:2008) Anzeigen (ISO 9241-306:2008)
This European Standard was approved by CEN on 12 April 2008.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2008 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 9241-306:2008: E
worldwide for CEN national Members.
Contents Page
Foreword .3
Foreword
This document (EN ISO 9241-306:2008) has been prepared by Technical Committee ISO/TC 159
"Ergonomics" in collaboration with Technical Committee CEN/TC 122 "Ergonomics", the secretariat of which
is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by May 2009, and conflicting national standards shall be withdrawn at the
latest by May 2009.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 9241-306:2008 has been approved by CEN as a EN ISO 9241-306:2008 without any
modification.
INTERNATIONAL ISO
STANDARD 9241-306
First edition
2008-11-15
Ergonomics of human-system
interaction —
Part 306:
Field assessment methods for electronic
visual displays
Ergonomie de l'interaction homme-système —
Partie 306: Méthodes d'appréciation sur le terrain des écrans de
visualisation électroniques
Reference number
ISO 9241-306:2008(E)
©
ISO 2008
ISO 9241-306:2008(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
© ISO 2008
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2008 – All rights reserved
ISO 9241-306:2008(E)
Contents Page
Foreword. iv
Introduction . vi
1 Scope . 1
2 Normative references . 1
3 Terms and definitions. 1
4 Preparation for assessment . 1
4.1 Cathode ray tube (CRT) displays . 1
4.2 Liquid crystal displays (LCD) . 2
5 Assessment methods. 3
5.1 Viewing conditions . 3
5.2 Luminance . 5
5.3 Special physical environments . 7
5.4 Visual artefacts . 8
5.5 Legibility and readability. 11
5.6 Legibility of information coding. 13
5.7 Legibility of graphics. 14
5.8 Fidelity . 15
6 Other considerations. 16
6.1 Isotropic surface. 16
6.2 Anisotropic surfaces . 16
6.3 Viewing angle range . 16
6.4 Adjustability . 16
6.5 Controllability. 17
6.6 Luminous environment . 17
Annex A (informative) Overview of the ISO 9241 series. 18
Annex B (informative) Influences on ergonomics parameters of visual displays. 22
Annex C (informative) Unwanted reflections. 25
Annex D (informative) Display output linearization and evaluation of achromatic ISO/IEC test
chart output for eight different ambient light reflections at office work places. 28
Bibliography . 45
ISO 9241-306:2008(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 9241-306 was prepared by Technical Committee ISO/TC 159, Ergonomics, Subcommittee SC 4,
Ergonomics of human-system interaction.
ISO 9241 consists of the following parts, under the general title Ergonomic requirements for office work with
visual display terminals (VDTs):
⎯ Part 1: General introduction
⎯ Part 2: Guidance on task requirements
⎯ Part 4: Keyboard requirements
⎯ Part 5: Workstation layout and postural requirements
⎯ Part 6: Guidance on the work environment
⎯ Part 9: Requirements for non-keyboard input devices
⎯ Part 11: Guidance on usability
⎯ Part 12: Presentation of information
⎯ Part 13: User guidance
⎯ Part 14: Menu dialogues
⎯ Part 15: Command dialogues
⎯ Part 16: Direct manipulation dialogues
⎯ Part 17: Form filling dialogues
iv © ISO 2008 – All rights reserved
ISO 9241-306:2008(E)
ISO 9241 also consists of the following parts, under the general title Ergonomics of human-system interaction:
⎯ Part 20: Accessibility guidelines for information/communication technology (ICT) equipment and services
⎯ Part 110: Dialogue principles
⎯ Part 151: Guidance on World Wide Web user interfaces
⎯ Part 171: Guidance on software accessibility
⎯ Part 300: Introduction to electronic visual display requirements
⎯ Part 302: Terminology for electronic visual displays
⎯ Part 303: Requirements for electronic visual displays
⎯ Part 304: User performance test methods for electronic visual displays
⎯ Part 305: Optical laboratory test methods for electronic visual displays
⎯ Part 306: Field assessment methods for electronic visual displays
⎯ Part 307: Analysis and compliance test methods for electronic visual displays
⎯ Part 308: Surface-conduction electron-emitter displays (SED) [Technical Report]
⎯ Part 309: Organic light-emitting diode (OLED) displays [Technical Report]
⎯ Part 400: Principles and requirements for physical input devices
⎯ Part 410: Design criteria for physical input devices
⎯ Part 920: Guidance on tactile and haptic interactions
For the other parts under preparation, see Annex A.
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.