EN ISO 9311-2:2011

Adhesives for thermoplastic piping systems - Part 2: Determination of shear strength (ISO 9311-2:2011)

ISO 9311-2:2011 specifies a method for the determination of the shear strength of joints made with adhesives for thermoplastic piping systems.

Klebstoffe für thermoplastische Rohrleitungssysteme - Teil 2: Bestimmung der Scherfestigkeit (ISO 9311-2:2011)

Dieser Teil von ISO 9311 legt ein Verfahren zur Bestimmung der Scherfestigkeit von Klebe¬ver¬bin¬dun¬gen für thermoplastische Rohrleitungssysteme fest.

Adhésifs pour réseaux de tuyauteries en matières thermoplastiques - Partie 2: Détermination de la résistance au cisaillement (ISO 9311-2:2011)

L'ISO 9311-2:2011 spécifie une méthode de détermination de la résistance au cisaillement de joints constitués d'adhésifs pour réseaux de tuyauteries en matières thermoplastiques.

Lepila za plastomerne cevne sisteme - 2. del: Določanje strižne trdnosti (ISO 9311-2:2011)

Ta evropski standard opisuje metodo za ugotavljanje strižne trdnosti spojev, narejenih z lepili za plastomerne cevne sisteme.

General Information

• Status: Published
• Publication Date: 14-Aug-2011
• Withdrawal Date: 28-Feb-2012
• ICS: 23.040.01 - Pipeline components and pipelines in general
• ICS: 83.180 - Adhesives
• Technical Committee: CEN/TC 193 - Adhesives
• Drafting Committee: CEN/TC 193/WG 6 - Adhesives for thermoplastic piping systems
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 15-Aug-2011
• Due Date: 12-Jun-2011
• Completion Date: 15-Aug-2011
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Directive: 89/106/EEC - Construction products
• Mandate: M/131 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on pipes, tanks and ancillaries, not in contact with water intended for human consumption
• Ref Project: SIST EN ISO 9311-2:2011 - Adhesives for thermoplastic piping systems - Part 2: Determination of shear strength (ISO 9311-2:2011)

Relations

• Replaces: EN ISO 9311-2:2002 - Adhesives for thermoplastic piping systems - Part 2: Determination of shear strength (ISO 9311-2:2002)
• Effective Date: 22-Dec-2008

Standards Content (Sample)

SLOVENSKI STANDARD
01-oktober-2011
1DGRPHãþD
SIST EN ISO 9311-2:2003
/HSLOD]DSODVWRPHUQHFHYQHVLVWHPHGHO'RORþDQMHVWULåQHWUGQRVWL,62

Adhesives for thermoplastic piping systems - Part 2: Determination of shear strength
(ISO 9311-2:2011)
Klebstoffe für thermoplastische Rohrleitungssysteme - Teil 2: Bestimmung der
Scherfestigkeit (ISO 9311-2:2011)
Adhésifs pour réseaux de tuyauteries en matières thermoplastiques - Partie 2:
Détermination de la résistance au cisaillement (ISO 9311-2:2011)
Ta slovenski standard je istoveten z: EN ISO 9311-2:2011
ICS:
23.040.20 Cevi iz polimernih materialov Plastics pipes
83.180 Lepila Adhesives
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN ISO 9311-2
NORME EUROPÉENNE
EUROPÄISCHE NORM
August 2011
ICS 23.040.01; 83.180 Supersedes EN ISO 9311-2:2002
English Version
Adhesives for thermoplastic piping systems - Part 2:
Determination of shear strength (ISO 9311-2:2011)
Adhésifs pour réseaux de tuyauteries en matières Klebstoffe für thermoplastische Rohrleitungssysteme - Teil
thermoplastiques - Partie 2: Détermination de la résistance 2: Bestimmung der Scherfestigkeit (ISO/FDIS 9311-2:2011)
au cisaillement (ISO 9311-2:2011)
This European Standard was approved by CEN on 29 July 2011.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2011 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 9311-2:2011: E
worldwide for CEN national Members.

Contents Page
Foreword .3
Foreword
This document (EN ISO 9311-2:2011) has been prepared by Technical Committee CEN/TC 193 “Adhesives",
the secretariat of which is held by AENOR, in collaboration with Technical Committee ISO/TC 138 "Plastics
pipes, fittings and valves for the transport of fluids".
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by February 2012, and conflicting national standards shall be withdrawn
at the latest by February 2012.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 9311-2:2002.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

INTERNATIONAL ISO
STANDARD 9311-2
Second edition
2011-08-15
Adhesives for thermoplastic piping
systems —
Part 2:
Determination of shear strength
Adhésifs pour réseaux de tuyauteries en matières thermoplastiques —
Partie 2: Détermination de la résistance au cisaillement

Reference number
ISO 9311-2:2011(E)
©
ISO 2011
ISO 9311-2:2011(E)
©  ISO 2011
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.org
Published in Switzerland
ii © ISO 2011 – All rights reserved

ISO 9311-2:2011(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 9311-2 was prepared by the European Committee for Standardization (CEN) Technical Committee
CEN/TC 193, Adhesives, in collaboration with Technical Committee ISO/TC 138, Plastics pipes, fittings and
valves for the transport of fluids, Subcommittee SC 5, General properties of pipes, fittings and valves of plastic
materials and their accessories — Test methods and basic specifications, in accordance with the Agreement
on technical cooperation between ISO and CEN (Vienna Agreement).
This second edition cancels and replaces the first edition (ISO 9311-2:2002), which has been technically
revised.
ISO 9311 consists of the following parts, under the general title Adhesives for thermoplastic piping systems:
⎯ Part 1: Determination of film properties
⎯ Part 2: Determination of shear strength
⎯ Part 3: Test method for the determination of resistance to internal pressure

-------------------
...