EN ISO 8835-5:2009

Inhalational anaesthesia systems - Part 5: Anaesthetic ventilators (ISO 8835-5:2004)

ISO 8835-5:2004 specifies particular requirements for the essential performance of anaesthetic ventilators (as defined in 3.1). ISO 8835-5:2004 is applicable to anaesthetic ventilators which are always a component of an anaesthetic system and are intended to be continuously attended by an operator.
ISO 8835-5:2004 is not applicable to anaesthetic ventilators intended for use with flammable anaesthetics, as determined by Annex BB.
The requirements of ISO 8835-5:2004 which replace or modify the requirements of IEC 60601-1:1988 and its Amendments 1 (1991) and 2 (1995) are intended to take precedence over the corresponding general requirements.
This Scope is additional to the Scope given in IEC 60601-1:1988, Clause 1, except as noted above.

Systeme für die Inhalationsanästhesie - Teil 5: Anästhesie-Beatmungsgeräte (ISO 8835-5:2004)

Es gilt IEC 60601-1:1988, Abschnitt 1 mit folgenden Ausnahmen:
Dieser Teil von ISO 8835-5 legt besondere Anforderungen für die wesentliche Leistung von Anästhesie-
Beatmungsgeräten (wie in 3.1 definiert) fest. In diesem Teil von ISO 8835 behandelte Anästhesie-
Beatmungsgeräte sind immer ein Bestandteil eines Anästhesiesystems und dazu vorgesehen, ununterbrochen
durch einen Anwender überwacht zu werden.
Dieser Teil von ISO 8835 gilt nicht für Anästhesie-Beatmungsgeräte, die für die Verwendung mit brennbaren
Anästhesiemitteln bestimmt sind, wie in Anhang BB festgelegt.
Die Anforderungen von diesem Teil von ISO 8835, die die Anforderungen von IEC 60601-1:1988 und ihrer
Änderungen 1 (1991) und 2 (1995) ersetzen oder verändern, haben Vorrang vor den entsprechenden
allgemeinen Anforderungen.

Systèmes d'anesthésie par inhalation - Partie 5: Ventilateurs d'anesthésie (ISO 8835-5:2004)

L'ISO 8835-5:2004 spécifie des exigences particulières qui s'appliquent aux performances essentielles des ventilateurs d'anesthésie (définis en 3.1). L'ISO 8835-5:2004 couvre les ventilateurs d'anesthésie qui font toujours partie d'un système d'anesthésie et sont conçus pour être sous la surveillance continue d'un opérateur.
L'ISO 8835-5:2004 ne couvre pas les ventilateurs d'anesthésie qui sont conçus pour être utilisés avec des anesthésiques inflammables, déterminés selon l'Annexe BB.
Les exigences de l'ISO 8835-5:2004 qui remplacent ou modifient les exigences de la CEI 60601-1:1998, ainsi que ses Amendements 1 (1991) et 2 (1995), sont prévues pour être prioritaires par rapport aux exigences générales correspondantes.
Ce domaine d'application est additionnel au domaine d'application indiqué dans la CEI 60601-1:1988, Article 1, excepté ce qui précède.

Inhalacijski anestezijski sistemi - 5. del: Anestezijski ventilatorji (ISO 8835-5:2004)

General Information

• Status: Withdrawn
• Publication Date: 17-Mar-2009
• Withdrawal Date: 11-Dec-2012
• ICS: 11.040.10 - Anaesthetic, respiratory and reanimation equipment
• Technical Committee: CEN/TC 215 - Respiratory and anaesthetic equipment
• Drafting Committee: CEN/TC 215/WG 1 - Anaesthetic machines, medical breathing systems and anaesthetic gas scavenging systems
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 12-Dec-2012
• Completion Date: 12-Dec-2012
• Directive: 2007/47/EC - Directive 2007/47/EC of the European Parliament and of the council of 5 September 2007 amending Council Directive 90/385/EEC on the approximation of the laws of the Member States relating to active implantable medical devices, Council Directive 93/42/EEC concerning medical devices and Directive 98/8/EC concerning the placing of biocidal products on the market
• Directive: 93/42/EEC - Council Directive 93/42/EEC of 14 June 1993 concerning medical devices
• Mandate: M/023 - Standardization mandate to CEN/CENELEC concerning the development of European standards relating to medical devices
• Ref Project: SIST EN ISO 8835-5:2009 - Inhalational anaesthesia systems - Part 5: Anaesthesia ventilators (ISO 8835-5:2004)

Relations

• Replaces: EN ISO 8835-5:2004/AC:2006 - Inhalational anaesthesia systems - Part 5: Anaesthetic ventilators (ISO 8835-5:2004)
• Effective Date: 23-Mar-2009
• Replaces: EN ISO 8835-5:2004 - Inhalational anaesthesia systems - Part 5: Anaesthesia ventilators (ISO 8835-5:2004)
• Effective Date: 23-Mar-2009
• Replaces: EN ISO 8835-5:2004/AC:2004 - Inhalational anaesthesia systems - Part 5: Anaesthesia ventilators (ISO 8835-5:2004)
• Effective Date: 23-Mar-2009
• Replaced By: EN ISO 80601-2-13:2012 - Medical electrical equipment - Part 2-13: Particular requirements for basic safety and essential performance of an anaesthetic workstation (ISO 80601-2-13:2011)
• Effective Date: 26-Dec-2012

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 8835-5:2009
01-junij-2009
1DGRPHãþD
SIST EN ISO 8835-5:2004
SIST EN ISO 8835-5:2004/AC:2005
SIST EN ISO 8835-5:2004/AC:2006
Inhalacijski anestezijski sistemi - 5. del: Anestezijski ventilatorji (ISO 8835-5:2004)
Inhalational anaesthesia systems - Part 5: Anaesthesia ventilators (ISO 8835-5:2004)
Systeme für die Inhalationsanästhesie - Teil 5: Anästhesie-Beatmungsgeräte (ISO 8835-
5:2004)
Systèmes d'anesthésie par inhalation - Partie 5: Ventilateurs d'anesthésie (ISO 8835-
5:2004)
Ta slovenski standard je istoveten z: EN ISO 8835-5:2009
ICS:
11.040.10 Anestezijska, respiratorna in Anaesthetic, respiratory and
reanimacijska oprema reanimation equipment
SIST EN ISO 8835-5:2009 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 8835-5:2009

---------------------- Page: 2 ----------------------

SIST EN ISO 8835-5:2009
EUROPEAN STANDARD
EN ISO 8835-5
NORME EUROPÉENNE
EUROPÄISCHE NORM
March 2009
ICS 11.040.10 Supersedes EN ISO 8835-5:2004
English Version
Inhalational anaesthesia systems - Part 5: Anaesthetic
ventilators (ISO 8835-5:2004)
Systèmes d'anesthésie par inhalation - Partie 5: Systeme für die Inhalationsanästhesie - Teil 5: Anästhesie-
Ventilateurs d'anesthésie (ISO 8835-5:2004) Beatmungsgeräte (ISO 8835-5:2004)
This European Standard was approved by CEN on 1 March 2009.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2009 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 8835-5:2009: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 8835-5:2009
EN ISO 8835-5:2009 (E)
Contents Page
Foreword .3
Annex ZA (informative)  Relationship between this European Standard and the Essential
Requirements of EU Directive 93/42/EEC .4

2

---------------------- Page: 4 ----------------------

SIST EN ISO 8835-5:2009
EN ISO 8835-5:2009 (E)
Foreword
The text of ISO 8835-5:2004 has been prepared by Technical Committee ISO/TC 121 “Anaesthetic and
respiratory equipment” of the International Organization for Standardization (ISO) and has been taken over as
EN ISO 8835-5:2009 by Technical Committee CEN/TC 215 “Respiratory and anaesthetic equipment” the
secretariat of which is held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by September 2009, and conflicting national standards shall be
withdrawn at the latest by March 2010.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 8835-5:2004.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EC Directive.
For relationship with EC Directive, see informative Annex ZA, which is an integral part of this document.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the
...