EN 12449:2016/prA1
(Amendment)Copper and copper alloys - Seamless, round tubes for general purposes
Copper and copper alloys - Seamless, round tubes for general purposes
This European Standard specifies the composition, property requirements and tolerances on dimensions and form for seamless round drawn copper and copper alloy tubes for general purposes supplied in the size range from 3 mm up to and including 450 mm outside diameter and from 0,3 mm up to and including 20 mm wall thickness.
The sampling procedures and the methods of test for verification of conformity to the requirements of this European Standard are also specified.
NOTE Tubes having an outside diameter less than 80 mm and/or a wall thickness greater than 2 mm in certain alloys are most frequently used for free machining purposes which are specified in EN 12168.
Kupfer und Kupferlegierungen - Nahtlose Rundrohre zur allgemeinen Verwendung
Cuivre et alliages de cuivre - Tubes ronds sans soudure pour usages généraux
Baker in bakrove zlitine - Nevarjene cevi z okroglim prerezom za splošno uporabo
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 12449:2016/oprA1:2019
01-marec-2019
Baker in bakrove zlitine - Nevarjene cevi z okroglim prerezom za splošno uporabo
Copper and copper alloys - Seamless, round tubes for general purposes
Kupfer und Kupferlegierungen - Nahtlose Rundrohre zur allgemeinen Verwendung
Cuivre et alliages de cuivre - Tubes ronds sans soudure pour usages généraux
Ta slovenski standard je istoveten z: EN 12449:2016/prA1
ICS:
23.040.15 Cevi iz neželeznih kovin Non-ferrous metal pipes
77.150.30 Bakreni izdelki Copper products
SIST EN 12449:2016/oprA1:2019 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 12449:2016/oprA1:2019
---------------------- Page: 2 ----------------------
SIST EN 12449:2016/oprA1:2019
DRAFT
EUROPEAN STANDARD
EN 12449:2016
NORME EUROPÉENNE
EUROPÄISCHE NORM
prA1
January 2019
ICS 23.040.15; 77.120.30
English Version
Copper and copper alloys - Seamless, round tubes for
general purposes
Cuivre et alliages de cuivre - Tubes ronds sans soudure Kupfer und Kupferlegierungen - Nahtlose Rundrohre
pour usages généraux zur allgemeinen Verwendung
This draft amendment is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 133.
This draft amendment A1, if approved, will modify the European Standard EN 12449:2016. If this draft becomes an amendment,
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration.
This draft amendment was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingd
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.