EN ISO 3691-2:2016/prA2

Industrial trucks - Safety requirements and verification - Part 2: Self-propelled variable-reach trucks - Amendment 2 (ISO 3691-2:2016/DAM 2:2019)

2020-08-19: WI abandoned following cancellation of equivalent ISO WI

Flurförderzeuge - Sicherheitsanforderungen und Verifizierung - Teil 2: Motorkraftbetriebene Flurförderzeuge mit veränderlicher Reichweite - Änderung 1 (ISO 3691-2:2016/DAM 2:2019)

Chariots de manutention - Exigences de sécurité et vérification - Partie 2: Chariots automoteurs à portée variable - Amendement 2 (ISO 3691-2:2016/DAM 2:2019)

Vozila za talni transport - Varnostne zahteve in preverjanje - 2. del: Vozila z lastnim pogonom s spremenljivim dosegom - Dopolnilo A2 (ISO 3691-2:2016/DAM 2:2019)

General Information

• Status: Not Published
• Publication Date: 21-Mar-2021
• Withdrawal Date: 21-Sep-2021
• Technical Committee: CEN/TC 150 - Industrial trucks - Safety
• Drafting Committee: CEN/TC 150 - Industrial trucks - Safety
• Current Stage: 4098 - Decision to abandon - Enquiry
• Completion Date: 17-Aug-2020
• Directive: 2006/42/EC - Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast)
• Mandate: M/396 - Mandate to CEN and Cenelec for standardisation in the field of machinery
• Ref Project: SIST EN ISO 3691-2:2016/oprA2:2019 - Industrial trucks - Safety requirements and verification - Part 2: Self-propelled variable-reach trucks - Amendment 2 (ISO 3691-2:2016/DAM 2:2019)

Relations

• Amends: EN ISO 3691-2:2016 - Industrial trucks - Safety requirements and verification - Part 2: Self-propelled variable-reach trucks (ISO 3691-2:2016)
• Effective Date: 10-Oct-2018

Standards Content (Sample)

SLOVENSKI STANDARD
01-oktober-2019
Vozila za talni transport - Varnostne zahteve in preverjanje - 2. del: Vozila z lastnim
pogonom s spremenljivim dosegom - Dopolnilo A2 (ISO 3691-2:2016/DAM 2:2019)
Industrial trucks - Safety requirements and verification - Part 2: Self-propelled variable-
reach trucks - Amendment 2 (ISO 3691-2:2016/DAM 2:2019)
Flurförderzeuge - Sicherheitsanforderungen und Verifizierung - Teil 2:
Motorkraftbetriebene Flurförderzeuge mit veränderlicher Reichweite - Änderung 1 (ISO
3691-2:2016/DAM 2:2019)
Chariots de manutention - Exigences de sécurité et vérification - Partie 2: Chariots
automoteurs à portée variable - Amendement 2 (ISO 3691-2:2016/DAM 2:2019)
Ta slovenski standard je istoveten z: EN ISO 3691-2:2016/prA2
ICS:
53.060 Industrijski tovornjaki Industrial trucks
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

DRAFT AMENDMENT
ISO 3691-2:2016/DAM 2
ISO/TC 110/SC 2 Secretariat: SIS
Voting begins on: Voting terminates on:
2019-08-27 2019-11-19
Industrial trucks — Safety requirements and
verification —
Part 2:
Self-propelled variable-reach trucks
AMENDMENT 2
Chariots de manutention — Exigences de sécurité et vérification —
Partie 2: Chariots automoteurs à portée variable
AMENDEMENT 2
ICS: 53.060
THIS DOCUMENT IS A DRAFT CIRCULATED
This document is circulated as received from the committee secretariat.
FOR COMMENT AND APPROVAL. IT IS
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
ISO/CEN PARALLEL PROCESSING
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO 3691-2:2016/DAM 2:2019(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
©
PROVIDE SUPPORTING DOCUMENTATION. ISO 2019

ISO 3691-2:2016/DAM 2:2019(E)
© ISO 2019
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: [phone]
Fax: [phone]
Email: [e-mail]
Website: www.iso.org
Published in Switzerland
ii © ISO 2019 – All rights reserved

ISO 3691-2:2016/DAM 2:2019(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www .iso .org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www .iso
.org/iso/foreword .html.
This document was prepared by Technical Committee ISO/TC 110, Industrial trucks, Subcommittee SC 2
Safety of powered industrial trucks.
A list of all parts in the ISO 3691- series can be found on the ISO website.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www .iso .org/members .html.
ISO 3691-2:2016/DAM 2:2019(E)
iv © ISO 2019 – All rights reserved

ISO 3691-2:2016/DAM 2:2019(E)
Industrial trucks — Safety requirements and
verification —
Part 2:
Self-propelled variable-reach trucks
AMENDMENT 2
AMENDMENT 2
6.2.2 Operation of truck
Add bullet cc) to the list of specified information that shall be included, as applicable, in the instruction
handbook(s):
cc) Information or instructions regarding modification of the truck, which may introduce hazards or
risks not considered by manufacturers and
...