EN 16153:2013
(Main)Light transmitting flat multiwall polycarbonate (PC) sheets for internal and external use in roofs, walls and ceilings - Requirements and test methods
Light transmitting flat multiwall polycarbonate (PC) sheets for internal and external use in roofs, walls and ceilings - Requirements and test methods
This European Standard specifies the requirements for light transmitting flat multiwall polycarbonate (PC) sheets for internal and external use in walls, roofs and ceilings.
This European Standard applies to light transmitting flat extruded multiwall PC sheets with or without functional layers (e.g. coating, co-extruded layer) made from PC-based or other materials, without filling materials.
It also specifies the test methods needed for the evaluation of conformity and marking of the sheets.
Lichtdurchlässige, flache Stegmehrfachplatten aus Polycarbonat (PC) für Innen- und Außenanwendungen an Dächern, Wänden und Decken - Anforderungen und Prüfverfahren
Diese Europäische Norm legt die Anforderungen an lichtdurchlässige Stegmehrfachplatten aus PC für Innen- und Außenanwendungen an Dächern, Wänden und Decken fest.
Diese Europäische Norm gilt für lichtdurchlässige extrudierte Stegmehrfachplatten aus PC mit oder ohne Funk¬tionsschicht(en) (z. B. Beschichtung, koextrudierte Schicht) aus PC-basierten oder anderen Materialien ohne Füllmaterialien.
Außerdem legt sie die für die Konformitätsbewertung und die Kennzeichnung der Platten erforderlichen Prüf-verfahren fest.
Plaques d’éclairement multiparois et planes en polycarbonate (PC) pour usage intérieur ou extérieur dans les toitures, bardages et plafonds - Exigences et méthodes d’essai
La présente Norme européenne spécifie les exigences relatives aux plaques d'éclairement planes multi-parois en polycarbonate (PC) destinées à un usage intérieur ou extérieur dans les bardages, toitures et plafonds.
La présente Norme européenne s'applique aux plaques d'éclairement planes multi-parois extrudées en PC, avec ou sans couches fonctionnelles (par exemple, revêtement, couche co-extrudée) en matériaux à base de PC ou autres matériaux, sans matériaux de remplissage.
Elle spécifie également les méthodes d'essai nécessaires pour l'évaluation de la conformité ainsi que le marquage des plaques.
Prosojne ploščate večslojne polikarbonatne (PC) plošče za notranje in zunanje strehe, stene in strope - Zahteve in preskusne metode
Ta evropski standard opredeljuje zahteve za prosojne ploščate večslojne polikarbonatne (PC) plošče za notranje in zunanje stene, strehe in strope. Uporablja se samo za plošče za dobavo. Potrebno je sklicevanje na nacionalne predpise in dokumente proizvajalca za zahteve glede projektiranja in skladiščenja ter na osnovne napotke za namestitev plošč, vključno z vsemi varnostnimi vidiki.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Lichtdurchlässige flache mehrwandige Platten aus Polycarbonat (PC) für Innen- und Außenanwendungen an Dächern, Wänden und Decken - Anforderungen und PrüfverfahrenPlaques d'éclairement planes multiparois en polycarbonate (PC) pour toitures, bardages et plafonds intérieurs et extérieurs - Exigences et méthodes d'essaiLight transmitting flat multiwall polycarbonate (PC) sheets for internal and external roofs, walls and ceilings - Requirements and test methods91.060.01Stavbni elementi na splošnoElements of buildings in general83.140.10Filmi in folijeFilms and sheetsICS:Ta slovenski standard je istoveten z:EN 16153:2013SIST EN 16153:2013en,fr,de01-maj-2013SIST EN 16153:2013SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 16153
March 2013 ICS 83.140.10; 91.060.20 English Version
Light transmitting flat multiwall polycarbonate (PC) sheets for internal and external use in roofs, walls and ceilings - Requirements and test methods
Plaques d'éclairement multiparois et planes en polycarbonate (PC) pour usage intérieur ou extérieur dans les toitures, bardages et plafonds - Exigences et méthodes d'essai
Lichtdurchlässige, flache Stegmehrfachplatten aus Polycarbonat (PC) für Innen- und Außenanwendungen an Dächern, Wänden und Decken - Anforderungen und Prüfverfahren This European Standard was approved by CEN on 5 February 2013.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2013 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 16153:2013: ESIST EN 16153:2013
Magnification and reduction factors . 54 A.1 General . 54 A.2 Load duration . 54 A.3 Ageing and environmental influences . 54 A.4 Influence of temperature . 54 SIST EN 16153:2013
Clauses of this European Standard addressing the provisions of the EU Construction Products Directive . 56 ZA.1 Scope and relevant characteristics . 56 ZA.2 Procedures for the attestation of conformity of light transmitting flat multiwall polycarbonate sheets . 59 ZA.3 CE marking and labelling . 62 Bibliography . 65
It is applicable to the sheets for the delivery only. Reference should be made to national regulations and manufacturer's literature for requirements concerning the design, storage and fundamental guidance for installation of sheets, including all safety aspects. The standards and guideline addressing light transmitting flat multiwall PC sheets for building applications are the following:
EN 1873, Prefabricated accessories for roofing — Individual roof lights of plastics — Product specification and test methods (harmonised standard) EN 14963, Roof coverings — Continuous rooflights of plastics with or without upstands — Classification, requirements and test methods (harmonised standard) EOTA ETA-Guideline 010, Self supporting translucent roof kits The multiwall PC sheets that satisfy the requirements of this document are suitable for use as components in accordance with EN 1873, EN 14963 or EOTA ETA-Guideline 010. SIST EN 16153:2013
This European Standard applies to light transmitting flat extruded multiwall PC sheets with or without functional layers (e.g. coating, co-extruded layer) made from PC-based or other materials, without filling materials. It also specifies the test methods needed for the evaluation of conformity and marking of the sheets. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 410:2011, Glass in building — Determination of luminous and solar characteristics of glazing EN 673, Glass in building — Determination of thermal transmittance (U value) — Calculation method EN 674, Glass in building — Det
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.