EN 61375-2-2:2012

Electronic railway equipment - Train communication network (TCN) - Part 2-2: Wire Train Bus conformance testing

IEC 61375-2-2:2012 applies to all equipment and devices implemented according to IEC 61375-2-1, i.e. it covers the procedures to be applied to such equipment and devices when the conformance should be proven. The applicability of this standard to a TCN implementation allows for individual conformance checking of the implementation itself and is a pre-requisite for further interoperability checking between different TCN implementations.

Elektronische Betriebsmittel für Bahnen – Zug-Kommunikations-Netzwerk (TCN) – Teil 2-2: Wire Train Bus Konformitätsprüfung

Matériel électronique ferroviaire - Réseau embarqué de train (TCN) - Partie 2-2: Bus de Train Filaire - Essais de conformité

La CEI 61375-2-2:2012 s'applique à tous les équipements et dispositifs mis en place conformément à la CEI 61375-2-1. Elle concerne les modes opératoires à appliquer aux équipements et dispositifs dont il convient de démontrer la conformité. L'applicabilité de la présente norme à la mise en oeuvre d'un TCN permet de procéder à une vérification de conformité individuelle de la mise en oeuvre elle-même et constitue une condition préalable à un contrôle approfondi de l'interopérabilité des différentes mises en oeuvre du TCN.

Železniške elektronske naprave - Komunikacijsko omrežje vlaka - 2-2. del: Preskus skladnosti žičnega podatkovnega vodila vlaka WTB (IEC 61375-2-2:2012)

Ta del standarda IEC 61375 velja za vso opremo in naprave, ki se uporabljajo v skladu s standardom IEC 61375-2-1, tj. zajema postopke, ki jih je treba uporabljati za tako opremo in naprave v primeru dokazovanja skladnosti. Uporaba tega standarda za izvedbo komunikacijskega omrežja vlaka (TCN) omogoča posamezno preverjanje skladnosti same izvedbe in je pogoj za nadaljnje preverjanje interoperabilnosti med različnimi izvedbami komunikacijskega omrežja vlaka.

General Information

• Status: Published
• Publication Date: 02-Aug-2012
• Withdrawal Date: 25-Jul-2015
• ICS: 45.060 - Railway rolling stock
• Technical Committee: CLC/TC 9X - Electrical and electronic applications for railways
• Drafting Committee: IEC/TC 9 - IEC_TC_9
• Parallel Committee: IEC/TC 9 - IEC_TC_9
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 03-Aug-2012
• Completion Date: 03-Aug-2012
• Directive: 2001/16/EC - Directive 2001/16/EC of the European Parliament and of the Council of 19 March 2001 on the interoperability of the trans-European conventional rail system
• Directive: 2008/57/EC - Directive 2008/57/EC of the European Parliament and of the Council of 17 June 2008 on the interoperability of the rail system within the Community (Recast)
• Directive: 96/48/EC - Interoperability of the trans-European high-speed rail system
• Mandate: M/483 - Mandate for programming and standardisation addressed to the European standardisation bodies under directive 2008/57/EC in the field of the interoperability of the rail system within the European Union
• Ref Project: SIST EN 61375-2-2:2012 - Electronic railway equipment - Train communication network - Part 2-2: WTB - Wire Train Bus conformance testing (IEC 61375-2-2:2012)

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Elektronische Betriebsmittel für Bahnen – Zug-Kommunikations-Netzwerk (TCN) - Teil 2-2: Wire Train Bus Konformitätsprüfung (IEC 61375-2-2:2012)Matériel électronique ferroviaire - Réseau embarqué de train (TCN) - Partie 2-2: Bus de train filaire - Essais de conformité (CEI 61375-2-2:2012)Electronic railway equipment - Train communication network - Part 2-2: WTB - Wire Train Bus conformance testing (IEC 61375-2-2:2012)45.020Železniška tehnika na splošnoRailway engineering in generalICS:Ta slovenski standard je istoveten z:EN 61375-2-2:2012SIST EN 61375-2-2:2012en01-oktober-2012SIST EN 61375-2-2:2012SLOVENSKI
STANDARD
EUROPEAN STANDARD EN 61375-2-2 NORME EUROPÉENNE
EUROPÄISCHE NORM August 2012
CENELEC European Committee for Electrotechnical Standardization Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung
Management Centre: Avenue Marnix 17, B - 1000 Brussels
© 2012 CENELEC -
All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61375-2-2:2012 E
ICS 45.060
English version
Electronic railway equipment -
Train communication network (TCN) -
Part 2-2: Wire Train Bus conformance testing (IEC 61375-2-2:2012)
Matériel électronique ferroviaire -
Réseau embarqué de train (TCN) -
Partie 2-2: Bus de Train Filaire -
Essais de conformité (CEI 61375-2-2:2012)
Elektronische Betriebsmittel für Bahnen - Zug-Kommunikations-Netzwerk (TCN) - Teil 2-2: Wire Train Bus Konformitätsprüfung (IEC 61375-2-2:2012)
This European Standard was approved by CENELEC on 2012-07-26. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
Foreword The text of document 9/1643/FDIS, future edition 1 of IEC 61375-2-2, prepared by IEC/TC 9 "Electrical equipment and systems for railways" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 61375-2-2:2012.
The following dates are fixed: • latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2013-04-26 • latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2015-07-26
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a mandate given to CENELEC by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s).
For the relationship with EU Directive(s) see informative Annex ZZ, which is an integral part of this document.
Endorsement notice The text of the International Standard IEC 61375-2-2:2012 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following note has to be added for the standard indicated: IEC 61375-1 NOTE
Harmonized as EN 61375-1.
- 3 - EN 61375-2-2:2012 Annex ZA (normative)
Normative references to international publications with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
NOTE
When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies.
Publication Year Title EN/HD Year
IEC 60571 - Electronic equipment used on rail vehicles - -
IEC 60807 Series Rectangular connectors for frequencies below 3 MHz
- -
IEC 61375-2-1 - Electronic railway equipment - Train communication network (TCN) -
Part 2-1: Wire Train Bus (WTB) EN 61375-2-1 -
ISO/IEC 7498 Series Information technology - Open Systems Interconnection - Basic Reference Model - -
ISO/IEC 9646-1 1994 Information technology - Open Systems Interconnection - Conformance testing methodology and framework -
Part 1: General concepts - -
ISO/IEC 9646-7 1995 Information technology - Open Systems Interconnection - Conformance testing methodology and framework -
Part 7: Implementation Conformance Statements - -
UIC CODE 556 - Information transmission in the train (train-bus) - -
Annex ZZ (informative)
Coverage of Essential Requirements of EU Directives
This European Standard has been prepared under a mandate given to CENELEC by the European Commission and the European Free Trade Association and within its scope the standard covers all relevant essential requirements as given in Annex III of the EU Directive 2008/57/EC.
Compliance with this standard provides one means of conformity with the specified essential requirements of the Directive concerned.
WARNING: Other requirements and other EU Directives may be applicable to the products falling within the scope of this standard.
IEC 61375-2-2 Edition 1.0 2012-06 INTERNATIONAL STANDARD NORME INTERNATIONALE Electronic railway equipment – Train communication network (TCN) –
Part 2-2: Wire Train Bus conformance testing
Matériel électronique ferroviaire – Réseau embarqué de train (TCN) –
Partie 2-2: Bus de Train Filaire – Essais de conformité
INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE XD ICS 45.060 PRICE CODE CODE PRIX ISBN 978-2-88912-068-0
– 2 – 61375-2-2 ¤ IEC:2012 CONTENTS FOREWORD . 6 INTRODUCTION . 8 1 Scope . 10 2 Normative references . 10 3 Terms and definitions, Abbreviations, Conventions . 10 3.1 Terms and definitions . 10 3.2 Abbreviations . 11 4 Conformance test: approach, requirements and boundaries . 12 4.1 The approach . 12 4.1.1 Requirements . 12 4.1.2 Requirements declaration statements for an IUT . 14 4.2 Boundaries . 15 4.2.1 General . 15 4.2.2 Basic interconnection tests . 16 4.2.3 Capability tests . 16 4.2.4 Behaviour tests. 17 4.2.5 Conformance resolution tests . 17 4.2.6 Interpretation of clauses/subclauses and statements . 18 4.2.7 Relation to interoperability . 20 4.2.8 Relation to performance test . 20 4.3 Conformance assessment process outline . 21 4.3.1 General . 21 4.3.2 Analysis of results, outcomes and verdicts . 21 5 Conformance test of a WTB node, WTB trunk cable, WTB jumper cables, WTB extension cables. 22 5.1 PICS . 22 5.1.1 Instructions for filling the PICS pro-forma . 22 5.1.2 PICS tables . 24 5.1.3 Basic interconnection tests . 32 5.1.4 Capability tests . 32 5.1.5 Behaviour tests. 32 5.1.6 Link layer interface . 47 5.1.7 The test cases . 58 6 Conformance test of RTP . 68 6.1 Ports and Traffic_Store . 69 6.2 Dataset consistency . 69 6.2.1 Error handling . 69 6.2.2 Freshness supervision . 69 6.2.3 Synchronisation dataset . 69 6.2.4 Dataset polling . 70 6.2.5 Dataset, port and logical address . 70 6.2.6 Traffic_Store Identifier . 70 6.3 Port_Address . 70 6.4 Link_Process_Data_Interface primitives . 70 6.5 Messages services and protocols . 70 SIST EN 61375-2-2:2012

61375-2-2 ¤ IEC:2012 – 3 – 7 Conformance test of a WTB-equipped consist . 70 7.1 General . 70 7.2 PICS . 71 7.2.1 Instructions for filling the PICS pro-forma . 71 7.2.2 Abbreviations . 71 7.2.3 PICS tables . 71 7.3 Test suites . 74 7.3.1 Physical interface tests . 75 7.3.2 DC test: line resistance . 75 7.3.3 WTB Link_layer capabilities . 78 7.3.4 Data test storage . 85 7.4 Consist network interoperability test . 85 7.5 Application profile . 85 7.6 Several nodes on the consist . 85 8 Conformance test of NM . 85 Annex A (normative)
Test laboratory role and client role . 86 Annex B (informative)
Test instrumentation and dedicated test bed . 93 Bibliography . 101
Figure 1 – Insertion loss measurement . 34 Figure 2 – Measurement of the input resistance . 35 Figure 3 – End setting measurement setup 1 . 35 Figure 4 – End setting measurement setup 2 .
...