EN 61326-2-2:2013

Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-2: Particular requirements - Test configurations, operational conditions and performance criteria for portable test, measuring and monitoring equipment used in low-voltage distribution systems

IEC 61326-2-2:2012 specifies more detailed test configurations, operational conditions and performance criteria for equipment covered by Annex A of IEC 61326-1 which is used for testing, measuring or monitoring of protective measures in low-voltage distribution systems, and; powered by battery and/or from the circuit measured, and portable. This second edition cancels and replaces the first edition published in 2005. This edition constitutes a technical revision. The main technical changes are: Update with respect to IEC 61326-1:2012.

Elektrische Mess-, Steuer-, Regel- und Laborgeräte – EMV-Anforderungen – Teil 2-2: Besondere Anforderungen – Prüfanordnung, Betriebsbedingungen und Leistungsmerkmale für ortsveränderliche Prüf-, Mess- und Überwachungsgeräte für den Gebrauch in Niederspannungs-Stromversorgungsnetzen

Matériel électrique de mesure, de commande et de laboratoire - Exigences relatives à la CEM - Partie 2-2: Exigences particulières - Configurations d'essai, conditions de fonctionnement et critères de performance des matériels portatifs d'essai, de mesure et de surveillance utilisés dans des systèmes de distribution basse tension

La CEI 61326-2-2:2012 donne des spécifications plus détaillées des configurations d'essai, des conditions fonctionnelles et des critères de performance pour les matériels couverts par l'Annexe A de la CEI 61326-1, qui sont: utilisés pour le contrôle, la mesure ou la surveillance de mesures de protection dans les réseaux de distribution basse tension, et; alimentés par batterie et/ou par le circuit mesuré, et portatifs. Cette deuxième édition annule et remplace la première édition parue en 2005. Cette édition constitue une révision technique. Les principaux changements techniques sont: Mise à jour par rapport à la CEI 61326-1:2012.

Električna oprema za merjenje, kontrolo in laboratorijsko uporabo - Zahteve za elektromagnetno združljivost (EMC) - 2-2. del: Posebne zahteve - Preskusne konfiguracije, obratovalni pogoji in merila za lastnosti prenosne preskuševalne, merilne in nadzorne opreme, ki se uporablja v nizkonapetostnih razdeljevalnih sistemih (IEC 61326-2-2:2012)

Poleg področja uporabe standarda IEC 61326-1 ta del standarda IEC 61326 določa podrobnejše preskusne konfiguracije, obratovalne pogoje in merila za lastnosti opreme iz dodatka A standarda IEC 61326-1, za katero velja: – uporablja se za preskušanje, merjenje ali nadzorovanje zaščitnih ukrepov v nizkonapetostnih razdeljevalnih sistemih; – napaja jo baterija in/ali merjeni tokokrog in – je prenosna. Primeri take preskušane opreme med drugim vključujejo detektorje napetosti, naprave za preskušanje izolacije, naprave za preskušanje ozemljitvene neprekinjenosti, naprave za preskušanje ozemljitvene upornosti, naprave za preskušanje impedance zanke, naprave za preskušanje naprav na diferenčni tok (naprave za preskušanje RCD) in naprave za preskušanje faznega zaporedja, kot je opredeljeno v standardu IEC 61557. Proizvajalec določi okolje, v katerem naj bi se izdelek uporabljal, in/ali izbere ustrezne specifikacije preskusne ravni iz standarda IEC 61326-1.

General Information

• Status: Published
• Publication Date: 10-Jan-2013
• Withdrawal Date: 05-Nov-2015
• ICS: 17.220 - Electricity. Magnetism. Electrical and magnetic measurements
• ICS: 25.040.40 - Industrial process measurement and control
• ICS: 33.100 - Electromagnetic compatibility (EMC)
• Technical Committee: CLC/TC 65X - Industrial-process measurement, control and automation
• Drafting Committee: IEC/SC 65A - IEC_SC_65A
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 11-Jan-2013
• Completion Date: 11-Jan-2013
• Directive: 2004/108/EC - Directive 2004/108/EC of the European Parliament and of the Council of 15 December 2004 on the approximation of the laws of the Member States relating to electromagnetic compatibility and repealing Directive 89/336/EEC
• Directive: 2004/108/EU - DIRECTIVE 2004/108/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 15 December 2004 on the approximation of the laws of the Member States relating to electromagnetic compatibility and repealing Directive 89/336/EEC
• Directive: 2014/30/EU - Directive 2014/30/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to electromagnetic compatibility (recast)
• Ref Project: SIST EN 61326-2-2:2013 - Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-2: Particular requirements - Test configurations, operational conditions and performance criteria for portable test, measuring and monitoring equipment used in low-voltage distribution systems (IEC 61326-2-2:2012)

Relations

• Replaces: EN 61326-2-2:2006 - Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-2: Particular requirements - Test configurations, operational conditions and performance criteria for portable test, measuring and monitoring equipment used in low-voltage distribution systems
• Effective Date: 29-Jan-2023
• Replaced By: EN IEC 61326-2-2:2021 - Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-2: Particular requirements - Test configurations, operational conditions and performance criteria for portable testing, measuring and monitoring equipment used in low-voltage distribution systems
• Effective Date: 25-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 61326-2-2:2013
01-marec-2013
1DGRPHãþD
SIST EN 61326-2-2:2007
(OHNWULþQDRSUHPD]DPHUMHQMHNRQWURORLQODERUDWRULMVNRXSRUDER=DKWHYH]D
HOHNWURPDJQHWQR]GUXåOMLYRVW(0&GHO3RVHEQH]DKWHYH3UHVNXVQH
NRQILJXUDFLMHREUDWRYDOQLSRJRMLLQPHULOD]DODVWQRVWLSUHQRVQHSUHVNXãHYDOQH
PHULOQHLQQDG]RUQHRSUHPHNLVHXSRUDEOMDYQL]NRQDSHWRVWQLKUD]GHOMHYDOQLK
VLVWHPLK,(&
Electrical equipment for measurement, control and laboratory use - EMC requirements -
Part 2-2: Particular requirements - Test configurations, operational conditions and
performance criteria for portable test, measuring and monitoring equipment used in low-
voltage distribution systems (IEC 61326-2-2:2012)
Elektrische Mess-, Steuer-, Regel- und Laborgeräte - EMV-Anforderungen – Teil 2-2:
Besondere Anforderungen - Prüfanordnung, Betriebsbedingungen und
Leistungsmerkmale für ortsveränderliche Prüf-, Mess- und Überwachungsgeräte für den
Gebrauch in Niederspannungs-Stromversorgungsnetzen (IEC 61326-2-2:2012)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 61326-2-2:2013
Matériel électrique de mesure, de commande et de laboratoire - Exigences relatives à la
CEM - Partie 2-2: Exigences particulières - Configurations d'essai, conditions de
fonctionnement et critères d'aptitude à la fonction des matériels portatifs d'essai, de
mesure et de surveillance utilisés dans des systèmes de distribution basse tension (CEI
61326-2-2:2012)
Ta slovenski standard je istoveten z: EN 61326-2-2:2013
ICS:
19.080 (OHNWULþQRLQHOHNWURQVNR Electrical and electronic
SUHVNXãDQMH testing
33.100.01 Elektromagnetna združljivost Electromagnetic compatibility
na splošno in general
SIST EN 61326-2-2:2013 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 2 ----------------------

SIST EN 61326-2-2:2013

---------------------- Page: 3 ----------------------

SIST EN 61326-2-2:2013

EUROPEAN STANDARD
EN 61326-2-2

NORME EUROPÉENNE
January 2013
EUROPÄISCHE NORM

ICS 17.220; 25.040.40; 33.100 Supersedes EN 61326-2-2:2006

English version

Electrical equipment for measurement, control and laboratory use -
EMC requirements -
Part 2-2: Particular requirements -
Test configurations, operational conditions and performance criteria for
portable test, measuring and monitoring equipment used in low-voltage
distribution systems
(IEC 61326-2-2:2012)

Matériel électrique de mesure, de Elektrische Mess-, Steuer-, Regel- und
commande et de laboratoire - Laborgeräte – EMV-Anforderungen – Teil
Exigences relatives à la CEM - 2-2: Besondere Anforderungen –
Partie 2-2: Exigences particulières - Prüfanordnung, Betriebsbedingungen und
Configurations d'essai, conditions de Leistungsmerkmale für ortsveränderliche
fonctionnement et critères d'aptitude à la Prüf-, Mess- und Überwachungsgeräte für
fonction des matériels portatifs d'essai, de den Gebrauch in Niederspannungs-
mesure et de surveillance utilisés dans Stromversorgungsnetzen
des systèmes de distribution basse (IEC 61326-2-2:2012)
tension
(CEI 61326-2-2:2012)

This European Standard was approved by CENELEC on 2012-11-06. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the CEN-CENELEC Management Centre has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany,
Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels


© 2013 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61326-2-2:2013 E

---------------------- Page: 4 ----------------------

SIST EN 61326-2-2:2013
EN 61326-2-2:2013 - 2 -
Foreword
The te
...