EN 62074-1:2014

Fibre optic interconnecting devices and passive components - Fibre optic WDM devices - Part 1: Generic specification

IEC 62074-1:2014(E) applies to fibre optic wavelength division multiplexing (WDM) devices. These have all of the following general features: - they are passive, in that they contain no optoelectronic or other transducing elements; - however they may use temperature control only to stabilize the device characteristics; - they exclude any optical switching functions; - they have three or more ports for the entry and/or exit of optical power, and share optical power among these ports in a predetermined fashion depending on the wavelength; - the ports are optical fibres, or optical fibre connectors. This standard establishes uniform requirements for the following: optical, mechanical and environmental properties. This second edition cancels and replaces the first edition, published in 2009, and constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: - substantial updating to the definitions; - the addition of informative Annexes C to G, giving examples of technical information concerning WDM devices. Keywords: fibre optic wavelength division multiplexing, WDM, requirements for optical, mechanical and environmental properties

Lichtwellenleiter - Verbindungselemente und passive Bauteile - Lichtwellenleiter-WDM-Bauteile - Teil 1: Fachgrundspezifikation

Dispositifs d'interconnexion et composants passifs à fibres optiques - Dispositifs WDM à fibres optiques - Partie 1: Spécification générique

L'IEC 62074-1:2014 s'applique aux dispositifs de multiplexage par répartition en longueur d'onde (WDM) à fibres optiques, dont les caractéristiques générales sont les suivantes: - ils sont passifs, en ce qu'ils ne contiennent aucun élément optoélectronique ni autre élément de transduction; - mais ils peuvent utiliser une commande de température uniquement dans le but de stabiliser les caractéristiques des dispositifs; - ils excluent toute fonction de commutation optique ils possèdent au moins trois ports pour l'entrée et/ou la sortie de la puissance optique et partagent la puissance optique entre ces ports d'une façon prédéterminée en fonction de la longueur d'onde; - les ports sont des fibres optiques ou des connecteurs à fibres optiques. La présente norme spécifie les exigences uniformes pour: les propriétés optiques, mécaniques et environnementales. Cette deuxième édition annule et remplace la première édition publiée en 2009; elle constitue une révision technique. Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente: - mise à jour significative des définitions; - ajout des Annexes informatives C à G présentant des exemples d'informations techniques relatives aux dispositifs WDM. Mots clés: dispositifs de multiplexage par répartition en longueur d'onde (WDM) à fibres optiques, exigence pour les propriétés optiques, mécaniques et environnementales

Optični spojni elementi in pasivne komponente - Optični elementi za WDM (valovni multipleks) - 1. del: Rodovna specifikacija (IEC 62074-1:2014)

Ta del standarda IEC 62074 velja za optične elemente za valovno dolžinsko multipleksiranje (WDM). Ti elementi imajo vse naslednje splošne značilnosti:
• so pasivni in ne vsebujejo nobenih optoelektronskih ali drugih prevodnih elementov; kljub temu morda uporabljajo elemente za nadzor temperature za stabilizacijo lastnosti naprave; ne vsebujejo optičnih preklopnih funkcij;
• imajo vsaj tri vrata za vhod in/ali izhod optične moči, ki si optično moč delijo na predhodno določen način, odvisno od valovnih dolžin;
• vrata so optična vlakna ali optični konektorji. Ta standard uvaja enotne zahteve za:
• optične, mehanske in okoljske lastnosti.

General Information

• Status: Published
• Publication Date: 03-Apr-2014
• Withdrawal Date: 12-Mar-2015
• ICS: 33.180.01 - Fibre optic systems in general
• ICS: 33.180.20 - Fibre optic interconnecting devices
• Technical Committee: CLC/TC 86BXA - Fibre optic interconnect, passive and connectorised components
• Drafting Committee: IEC/SC 86B - IEC_SC_86B
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 04-Apr-2014
• Completion Date: 04-Apr-2014
• Ref Project: SIST EN 62074-1:2014 - Fibre optic interconnecting devices and passive components - Fibre optic WDM devices - Part 1: Generic specification

Relations

• Replaces: EN 62074-1:2009 - Fibre optic interconnecting devices and passive components - Fibre optic WDM devices - Part 1: Generic specification
• Effective Date: 28-Jan-2023
• Revised: prEN IEC 62074-1:2024 - Fibre optic interconnecting devices and passive components - Fibre optic WDM devices - Part 1: Generic specification
• Effective Date: 22-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 62074-1:2014
01-julij-2014
1DGRPHãþD
SIST EN 62074-1:2010
2SWLþQLVSRMQLHOHPHQWLLQSDVLYQHNRPSRQHQWH2SWLþQLHOHPHQWL]D:'0YDORYQL
PXOWLSOHNVGHO5RGRYQDVSHFLILNDFLMD,(&
Fibre optic interconnecting devices and passive components - Fibre optic WDM devices -
Part 1: Generic specification
Ta slovenski standard je istoveten z: EN 62074-1:2014
ICS:
33.180.20 3RYH]RYDOQHQDSUDYH]D Fibre optic interconnecting
RSWLþQDYODNQD devices
SIST EN 62074-1:2014 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 62074-1:2014

---------------------- Page: 2 ----------------------

SIST EN 62074-1:2014

EUROPEAN STANDARD
EN 62074-1

NORME EUROPÉENNE
April 2014
EUROPÄISCHE NORM

ICS 33.180.01; 33.180.20 Supersedes EN 62074-1:2009


English version


Fibre optic interconnecting devices and passive components -
Fibre optic WDM devices -
Part 1: Generic specification
(IEC 62074-1:2014)


Dispositifs d'interconnexion et dispositifs Lichtwellenleiter -
passifs à fibres optiques - Verbindungselemente und passive
Dispositifs WDM à fibres optiques - Bauteile -
Partie 1: Spécification générique Lichtwellenleiter-WDM-Bauteile -
(CEI 62074-1:2014) Teil 1: Fachgrundspezifikation
(IEC 62074-1:2014)





This European Standard was approved by CENELEC on 2014-03-13. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the CEN-CENELEC Management Centre has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany,
Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

CEN-CENELEC Management Centre: Avenue Marnix 17, B - 1000 Brussels


© 2014 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 62074-1:2014 E

---------------------- Page: 3 ----------------------

SIST EN 62074-1:2014
EN 62074-1:2014 - 2 -
Foreword
The text of document 86B/3700/FDIS, future edition 2 of IEC 62074-1, prepared by SC 86B "Fibre
optic interconnecting devices and passive components" of IEC/TC 86 "Fibre optics" was submitted to
the IEC-CENELEC parallel vote and approved by CENELEC as EN 62074-1:2014.
The following dates are fixed:
– latest date by which the document has to be implemented at (dop) 2014-12-13
national level by publication of an identical national
standard or by endorsement
– latest date by which the national standards conflicting with (dow) 2017-03-13
the document have to be withdrawn

This document supersedes EN 62074-1:2009.
EN 62074-1:2014 includes the following significant technical changes with respect to
EN 62074-1:2009:
– substantial updating to the definitions;
– the addition of informative Annexes C to G, giving examples of technical information concerning
WDM devices.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
Endorsement notice
The text of the International Standard IEC 62074-1:2014 was approved by CENELEC as a European
Standard without any modification.

---------------------- Page: 4 ----------------------

SIST EN 62074-1:2014
- 3 - EN 62074-1:2014
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
NOTE  When an international publication has been modified by common modifications, indicated by (mod),
...