Lamp controlgear - Part 2-13: Particular requirements for d.c. or a.c. supplied electronic controlgear for LED modules

This part of IEC 61347 specifies particular safety requirements for electronic controlgear for use on d.c. supplies up to 250 V and a.c. supplies up to 1 000 V at 50 Hz or 60 Hz and at an output frequency which can deviate from the supply frequency, associated with LED modules.

Geräte für Lampen - Teil 2-13: Besondere Anforderungen an gleich- oder wechselstromversorgte elektronische Betriebsgeräte für LED-Module

Appareillages de lampes - Partie 2-13: Exigences particulières pour les appareillages électroniques alimentés en courant continu ou alternatif pour les modules de DEL

La présente partie de la CEI 61347 spécifie les exigences particulières de sécurité pour les appareillages électroniques alimentés en courant continu ou alternatif pour l'utilisation sur des alimentations en courant continu jusqu'à 250 V et sur des alimentations en courant alternatif jusqu'à 1 000 V en 50 Hz ou 60 Hz et avec une fréquence de sortie qui peut être différente de la fréquence d'alimentation, associée avec des modules à DEL.

Krmilne stikalne naprave - 2-13. del: Posebne zahteve za enosmerno ali izmenično napajane krmilne stikalne naprave za module LED (IEC 61347-2-13:2006)

General Information

Status
Withdrawn
Publication Date
01-Aug-2006
Withdrawal Date
30-Jun-2009
Drafting Committee
Parallel Committee
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
08-Oct-2017
Completion Date
08-Oct-2017

Relations

Buy Standard

Standard
EN 61347-2-13:2007
English language
42 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 61347-2-13:2007
01-januar-2007
.UPLOQHVWLNDOQHQDSUDYHGHO3RVHEQH]DKWHYH]DHQRVPHUQRDOLL]PHQLþQR
QDSDMDQHNUPLOQHVWLNDOQHQDSUDYH]DPRGXOH/(' ,(&
Lamp controlgear -- Part 2-13: Particular requirements for d.c. or a.c. supplied electronic
controlgear for LED modules
Geräte für Lampen -- Teil 2-13: Besondere Anforderungen an gleich- oder
wechselstromversorgte elektronische Betriebsgeräte für LED-Module
Appareillages de lampes -- Partie 2-13: Exigences particulières pour les appareillages
électroniques alimentés en courant continu ou alternatif pour les modules de DEL
Ta slovenski standard je istoveten z: EN 61347-2-13:2006
ICS:
29.130.01 Stikalne in krmilne naprave Switchgear and controlgear
na splošno in general
29.140.99 Drugi standardi v zvezi z Other standards related to
žarnicami lamps
SIST EN 61347-2-13:2007 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD
EN 61347-2-13

NORME EUROPÉENNE
August 2006
EUROPÄISCHE NORM

ICS 29.140.99


English version


Lamp controlgear
Part 2-13: Particular requirements
for d.c. or a.c. supplied electronic controlgear
for LED modules
(IEC 61347-2-13:2006)


Appareillages de lampes  Geräte für Lampen
Partie 2-13: Exigences particulières pour Teil 2-13: Besondere Anforderungen an
les appareillages électroniques alimentés gleich- oder wechselstromversorgte
en courant continu ou alternatif pour elektronische Betriebsgeräte für
les modules de DEL LED-Module
(CEI 61347-2-13:2006) (IEC 61347-2-13:2006)




This European Standard was approved by CENELEC on 2006-07-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, the Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels


© 2006 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61347-2-13:2006 E

---------------------- Page: 2 ----------------------

EN 61347-2-13:2006 - 2 -
Foreword
The text of document 34C/730/FDIS, future edition 1 of IEC 61347-2-13, prepared by SC 34C, Auxiliaries
for lamps, of IEC TC 34, Lamps and related equipment, was submitted to the IEC-CENELEC parallel vote
and was approved by CENELEC as EN 61347-2-13 on 2006-07-01.
This standard shall be used in conjunction with EN 61347-1:2001.
In this standard, the following print types are used:
– requirements: in roman type;
– test specifications: in italic type;
– notes: in smaller roman type;
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
(dop) 2007-04-01
national standard or by endorsement
– latest date by which the national standards conflicting
(dow) 2009-07-01
with the EN have to be withdrawn
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 61347-2-13:2006 was approved by CENELEC as a European
Standard without any modification.
__________

---------------------- Page: 3 ----------------------

- 3 - EN 61347-2-13:2006
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.

Publication Year Title EN/HD Year

IEC 60051 Series Direct acting indicating analogue elec
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.