EN 55016-2-2:2011

Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-2: Methods of measurement of disturbances and immunity - Measurement of disturbance power

CISPR 16-2-2:2010 specifies the methods of measurement of disturbance power using the absorbing clamp in the frequency range 30 MHz to 1 000 MHz. This second edition cancels and replaces the first edition (2003), its Amendment 1 (2004) and Amendment 2 (2005). It constitutes a technical revision. It includes the following significant technical changes with respect to the previous edition: provisions for the use of spectrum analyzers for compliance measurements (Annex D) and the use of FFT-based test instrumentation (Clauses 3, 6 and 8) are now included. CISPR 16-2-2:2010 has the status of a basic EMC publication in accordance with IEC Guide 107, Electromagnetic compatibility - Guide to the drafting of electromagnetic compatibility publications.

Anforderungen an Geräte und Einrichtungen sowie Festlegung der Verfahren zur Messung der hochfrequenten Störaussendung (Funkstörungen) und Störfestigkeit - Teil 2-2: Verfahren zur Messung der hochfrequenten Störaussendung (Funkstörungen) und Störfestigkeit - Messung der Störleistung

Spécifications des méthodes et des appareils de mesure des perturbations radioélectriques et de l'immunité aux perturbations radioélectriques - Partie 2-2: Méthodes de mesure des perturbations et de l'immunité - Mesure de la puissance perturbatrice

La CISPR 16-2-2:2010 spécifie la méthode de mesure de la puissance perturbatrice, utilisant la pince absorbante, dans la gamme de fréquences de 30 MHz à 1 000 MHz. Cette deuxième édition annule et remplace la première édition (2003), son Amendement 1 (2004) et son Amendement 2 (2005). Elle constitue une révision technique. Elle contient les modifications techniques significatives suivantes par rapport à l'édition précédente: des dispositions relatives à l'utilisation d'analyseurs de spectre pour les mesures de conformité (Annexe D) et l'utilisation d'appareils d'essai à FFT (Articles 3, 6 et 8) sont désormais incluses. La CISPR 16-2-2:2010 a le statut d'une publication fondamentale en CEM conformément au Guide 107 de la CEI, Compatibilité électromagnétique - Guide pour la rédaction des publications sur la compatibilité électromagnétique.

Specifikacija za merilne naprave in metode za merjenje radijskih motenj in odpornosti - 2-2. del: Metode za merjenje radijskih motenj in odpornosti - Merjenje moči motenj (CISPR 16-2-2:2010)

Ta del CISPR 16 opredeljuje metode za merjenje moči motenj z uporabo absorpcijske sponke v frekvenčnem razponu od 30 MHz do 1000 MHz.
OPOMBA: V skladu z Vodilom IEC 107 je CISPR 16-2-2 osnovna objava EMC, ki jo uporabljajo odbori za proizvode IEC. Kot je navedeno v Vodilu 107, so odbori za proizvode odgovorni za določevanje uporabe tega standarda EMC. CISPR in njegovi pododbori so pripravljeni sodelovati z odbori za proizvode pri določevanju vrednosti posameznih preskusov EMC za nekatere proizvode.

General Information

• Status: Published
• Publication Date: 31-Mar-2011
• Withdrawal Date: 01-Jan-2014
• ICS: 33.100.10 - Emission
• ICS: 33.100.20 - Immunity
• Technical Committee: CLC/TC 210 - Electromagnetic Compatibility (EMC)
• Drafting Committee: IEC/SC CISPR/A - Merjenje radijskih interferenc in statistične metode
• Parallel Committee: IEC/SC CISPR/A - Merjenje radijskih interferenc in statistične metode
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 01-Apr-2011
• Completion Date: 01-Apr-2011
• Directive: 2004/108/EC - Directive 2004/108/EC of the European Parliament and of the Council of 15 December 2004 on the approximation of the laws of the Member States relating to electromagnetic compatibility and repealing Directive 89/336/EEC
• Directive: 2004/108/EU - DIRECTIVE 2004/108/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 15 December 2004 on the approximation of the laws of the Member States relating to electromagnetic compatibility and repealing Directive 89/336/EEC
• Directive: 2014/30/EU - Directive 2014/30/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to electromagnetic compatibility (recast)
• Ref Project: SIST EN 55016-2-2:2011 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-2: Methods of measurement of disturbances and immunity - Measurement of disturbance power

Relations

• Replaces: EN 55016-2-2:2004 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-2: Methods of measurement of disturbances and immunity - Measurement of disturbance power
• Effective Date: 29-Jan-2023
• Replaces: EN 55016-2-2:2004/A2:2005 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-2: Methods of measurement of disturbances and immunity - Measurement of disturbance power
• Effective Date: 29-Jan-2023
• Replaces: EN 55016-2-2:2004/A1:2005 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-2: Methods of measurement of disturbances and immunity - Measurement of disturbance power
• Effective Date: 28-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
01-junij-2011
1DGRPHãþD
SIST EN 55016-2-2:2005
SIST EN 55016-2-2:2005/A1:2005
SIST EN 55016-2-2:2005/A2:2005
6SHFLILNDFLMD]DPHULOQHQDSUDYHLQPHWRGH]DPHUMHQMHUDGLMVNLKPRWHQMLQ
RGSRUQRVWLGHO0HWRGH]DPHUMHQMHUDGLMVNLKPRWHQMLQRGSRUQRVWL0HUMHQMH
PRþLPRWHQM&,635
Specification for radio disturbance and immunity measuring apparatus and methods -
Part 2-2: Methods of measurement of disturbances and immunity - Measurement of
disturbance power
Anforderungen an Geräte und Einrichtungen sowie Festlegung der Verfahren zur
Messung der hochfrequenten Störaussendung (Funkstörungen) und Störfestigkeit - Teil
2-2: Verfahren zur Messung der hochfrequenten Störaussendung (Funkstörungen) und
Störfestigkeit - Messung der Störleistung
Spécifications des méthodes et des appareils de mesure des perturbations
radioélectriques et de l'immunité aux perturbations radioélectriques - Partie 2-2:
Méthodes de mesure des perturbations et de l'immunité - Mesure de la puissance
perturbatrice
Ta slovenski standard je istoveten z: EN 55016-2-2:2011
ICS:
17.220.20 0HUMHQMHHOHNWULþQLKLQ Measurement of electrical
PDJQHWQLKYHOLþLQ and magnetic quantities
33.100.20 Imunost Immunity
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 55016-2-2
NORME EUROPÉENNE
April 2011
EUROPÄISCHE NORM
ICS 33.100.10; 33.100.20 Supersedes EN 55016-2-2:2004 + A1:2005 + A2:2005

English version
Specification for radio disturbance and immunity measuring apparatus
and methods -
Part 2-2: Methods of measurement of disturbances and immunity -
Measurement of disturbance power
(CISPR 16-2-2:2010)
Spécifications des méthodes et des Anforderungen an Geräte und
appareils de mesure des perturbations Einrichtungen sowie Festlegung der
radioélectriques et de l'immunité aux Verfahren zur Messung der
perturbations radioélectriques - hochfrequenten Störaussendung
Partie 2-2: Méthodes de mesure des (Funkstörungen) und Störfestigkeit -
perturbations et de l'immunité - Teil 2-2: Verfahren zur Messung der
Mesure de la puissance perturbatrice hochfrequenten Störaussendung
(CISPR 16-2-2:2010) (Funkstörungen) und Störfestigkeit -
Messung der Störleistung
(CISPR 16-2-2:2010)
This European Standard was approved by CENELEC on 2011-01-02. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels

© 2011 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 55016-2-2:2011 E
Foreword
The text of document CISPR/A/877/CDV, future edition 2 of CISPR 16-2-2, prepared by CISPR SC A,
Radio-interference measurements and statistical methods, was submitted to the IEC-CENELEC parallel
vote and was approved by CENELEC as EN 55016-2-2 on 2011-01-02.
This European Standard supersedes EN 55016-2-2:2004 + A1:2005 + A2:2005.
This EN 55016-2-2:2011 includes the following significant technical changes with respect to
EN 55016-2-2:2004 + A1:2005 + A2:2005: provisions for the use of spectrum analyzers for compliance
measurements (Annex D) and the use of FFT-based test instrumentation (Clauses 3, 6 and 8) are now
included.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN and CENELEC shall not be held responsible for identifying any or all such patent
rights.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2011-10-02
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2014-01-02
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard CISPR 16-2-2:2010 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
[1] CISPR 13 NOTE  Harmonized as EN 55013.
[2] CISPR 14-1:2005 NOTE  Harmonized as EN 55014-1:2006 (not modified).
[3] CISPR 16-2-1:2008 NOTE  Harmonized as EN 55016-2-1:2009 (not modified).
__________
- 3 - EN 55016-2-2:2011
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year

CISPR 16-1-1 2010 Specification for radio disturbance and EN 55016-1-1 2010
immunity measuring apparatus and methods -
Part 1-1: Radio disturbance and immunity
measuring apparatus - Measuring apparatus

CISPR 16-1-3 2004 Specification for radio disturbance and EN 55016-1-3 2006
immunity measuring apparatus and methods -
Part 1-3: Radio disturbance and immunity
measuring apparatus - Ancillary equipment -
Disturbance power
1) 2)
CISPR 16-1-4 - Specification for radio disturbance and EN 55016-1-4 2010
immunity measuring apparatus and methods -
Part 1-4: Radio disturbance and immunity
measuring apparatus - Antennas and test
sites for radiated disturbance measurements

1) 2)
CISPR 16-4-2 - Specification for radio disturbance and EN 55016-4-2 2004
immunity measuring apparatus and methods -
Part 4-2: Uncertainties, statistics and limit
modelling - Uncertainty in EMC
measurements
IEC 60050-161 1990 International Electrotechnical Vocabulary - -
(IEV) -
Chapter 161: Electromagnetic compatibility

1)
Undated reference.
2)
Valid edition at date of issue.

CISPR 16-2-2 ®
Edition 2.0 2010-07
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
INTERNATIONAL SPECIAL COMMITTEE ON RADIO INTERFERENCE
COMITÉ INTERNATIONAL SPÉCIAL DES PERTURBATIONS RADIOÉLECTRIQUES
BASIC EMC PUBLICATION
PUBLICATION FONDAMENTALE EN CEM
Specification for radio disturbance and immunity measuring apparatus
and methods –
Part 2-2: Methods of measurement of disturbances and immunity –
Measurement of disturbance power

Spécifications des méthodes et des appareils de mesure des perturbations
radioélectriques et de l'immunité aux perturbations radioélectriques –
Partie 2-2: Méthodes de mesure des perturbations et de l'immunité –
Mesure de la puissance perturbatrice

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
X
CODE PRIX
ICS 33.100.10; 33.100.20 ISBN 978-2-88912-097-0
– 2 – CISPR 16-2-2 © IEC:2010
CONTENTS
FOREWORD.5
1 Scope.7
2 Normative references.7
3 Terms and definitions .7
4 Types of disturbance to be measured.12
4.1 General .12
4.2 Types of disturbance .12
4.3 Detector functions .12
5 Connection of measuring equipment .13
5.1 General .13
5.2 Connection of ancillary equipment.13
6 General measurement requirements and conditions .13
6.1 General .13
6.2 Disturbance not produced by the equipment under test .13
6.2.1 General .13
6.2.2 Compliance testing .13
6.3 Measurement of continuous disturbance .13
6.3.1 Narrowband continuous disturbance.13
6.3.2 Broadband continuous disturbance.14
6.3.3 Use of spectrum analyzers and scanning receivers.14
6.4 Operating conditions of the EUT .14
6.4.1 General .14
6.4.2 Normal load conditions.14
6.4.3 The time of operation.14
6.4.4 Running-in time .14
6.4.5 Supply .14
6.4.6 Mode of operation.14
6.5 Interpretation of measuring results.14
6.5.1 Continuous disturbance .14
6.5.2 Discontinuous disturbance .15
6.5.3 Measurement of the duration of disturbances .15
6.6 Measurement times and scan rates for continuous disturbance .15
6.6.1 General .15
6.6.2 Minimum measurement times .15
6.6.3 Scan rates for scanning receivers and spectrum analyzers .16
6.6.4 Scan times for stepping receivers .17
6.6.5 Strategies for a spectrum overview using the peak detector.18
6.6.6 Timing considerations using FFT-based instruments .21
7 Measurements using the absorbing clamp.23
7.1 Introduction to ACMM .23
7.2 Application of the absorbing clamp measurement method .24
7.2.1 General .24
7.2.2 Frequency range.24
7.2.3 EUT unit dimensions.24
7.2.4 LUT requirements .24
7.3 Requirements for measurements instrumentation and test site .24

CISPR 16-2-2 © IEC:2010 – 3 –
7.3.1 General .24
7.3.2 Measuring receiver .24
7.3.3 Absorbing clamp assembly.24
7.3.4 Absorbing clamp test site requirements .25
7.4 Ambient requirements.26
7.5 EUT leads requirements .26
7.5.1 G
...