EN 61184:2008
(Main)Bayonet lampholders
Bayonet lampholders
IEC 61184:2008 applies to bayonet lampholders B15d and B22d for connection of lamps and semi-luminaires to a supply voltage of 250 V. This standard also covers lampholders which are integral with a luminaire or intended to be built into appliances. It covers the requirements for the lampholder only. This third edition cancels and replaces the second edition (1997) and its Amendments 1 (2000) and 2 (2004). This third edition constitutes a technical revision. In this edition, information to lampholders intended to be used in applications where they are accessible in normal use (class II as well as class I luminaires) are introduced. Additionally, in Table 11, lamp data where lamps no longer exist has been removed and requirements for shade holder rings have been amended to include shade rings according to IEC 60399 into testing. The contents of the corrigendum of February 2009 and December 2012 have been included in this copy.
Bajonett-Lampenfassungen
Douilles à baïonnette
La CEI 61184:2008 s'applique aux douilles à baïonnette B15d et B22d destinées à connecter les lampes et les semi-luminaires à une tension d'alimentation de 250 V. Cette norme couvre également les douilles qui sont intégrées dans un luminaire ou prévues pour être incorporées dans des appareils. Elle couvre uniquement les exigences applicables à la douille. Cette troisième édition annule et remplace la deuxième édition (1997) et ses Amendements 1 (2000) et 2 (2004). Cette troisième édition constitue une révision technique. Dans cette édition, des informations concernant les douilles destinées à être utilisées dans des applications où elles sont accessibles en utilisation normale (dans des luminaires de classe I comme de classe II) ont été introduites. De plus, dans le Tableau 11, les données de lampes des références de lampes qui n'existent plus ont été supprimées et des exigences pour les bagues support d'abat-jour ont été modifiées pour se mettre en accord avec les essais de la CEI 60399. Le contenu des corrigendum de février 2009 et décembre 2012 ont été pris en considération dans cet exemplaire.
Bajonetni okovi za žarnice in sijalke (IEC 61184:2008)
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Bajonetni okovi za žarnice in sijalke (IEC 61184:2008)Bajonett-Lampenfassungen (IEC 61184:2008)Douilles à baïonnette (CEI 61184:2008)Bayonet lampholders (IEC 61184:2008)29.140.10Grla in držala žarnicLamp caps and holdersICS:Ta slovenski standard je istoveten z:EN 61184:2008SIST EN 61184:2008en,fr01-december-2008SIST EN 61184:2008SLOVENSKI
STANDARDSIST EN 61184:1999/A2:2005SIST EN 61184:1999/A1:2003SIST EN 61184:19991DGRPHãþD
SIST EN 61184:2008
EUROPEAN STANDARD EN 61184 NORME EUROPÉENNE
EUROPÄISCHE NORM September 2008
CENELEC European Committee for Electrotechnical Standardization Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2008 CENELEC -
All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61184:2008 E
ICS 29.140.10 Supersedes EN 61184:1997 + A1:2001 + A2:2004
English version
Bayonet lampholders (IEC 61184:2008)
Douilles à baïonnette (CEI 61184:2008)
Bajonett-Lampenfassungen (IEC 61184:2008)
This European Standard was approved by CENELEC on 2008-08-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.
SIST EN 61184:2008
EN 61184:2008
– 2 – Foreword The text of document 34B/1385/FDIS, future edition 3 of IEC 61184, prepared by SC 34B, Lamp caps and holders, of IEC TC 34, Lamps and related equipment, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 61184 on 2008-08-01. This European Standard supersedes EN 61184:1997 + A1:2001 + A2:2004. The significant technical changes with respect to EN 61184:1997 are as follows: In EN 61184:2008, information to lampholders intended to be used in applications where they are accessible in normal use (class II as well as class I luminaires) are introduced. Additionally, in Table 11, lamp data where lamps no longer exist has been removed and requirements for shade holder rings have been amended to include shade rings according to EN 60399 into testing. The following dates were fixed: – latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement
(dop) 2009-05-01 – latest date by which the national standards conflicting
with the EN have to be withdrawn
(dow) 2011-08-01 In this standard, the following print types are used: – requirements proper: in roman type; – test specifications: in italic type; – notes: in small roman type. Annex ZA has been added by CENELEC. __________ Endorsement notice The text of the International Standard IEC 61184:2008 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated: IEC 60061-4 NOTE
Harmonized as EN 60061-4:1992 (modified). IEC 60238 NOTE
Harmonized as EN 60238:2004 (not modified). IEC 61058-1 NOTE
Harmonized as EN 61058-1:2002 (modified). __________ SIST EN 61184:2008
– 3 – EN 61184:2008
Annex ZA
(normative)
Normative references to international publications with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
NOTE
When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies.
Publication Year Title EN/HD Year
IEC 60061
(mod) Series Lamp caps and holders together with
gauges for the control of interchangeability and safety
EN 60061 Series
IEC 60061-1
(mod) - 1) Lamp caps and holders together with gauges for the control of interchangeability and safety -
Part 1: Lamp caps EN 60061-1
1993 2)
IEC 60061-2
(mod) - 1) Lamp caps and holders together with
gauges for the control of
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.