EN 60061-1:1993/A35:2005

• Abstract:

  Subscribe to IEC 60061 Database to access the full and updated content of the series.

• Status: Published
• Publication Date: 04-Jan-2005
• Withdrawal Date: 30-Nov-2007
• ICS: 29.140.10 - Lamp caps and holders
• Technical Committee: CLC/TC 34 - 'Lamps and related equipment
• Drafting Committee: IEC/SC 34B - IEC_SC_34B
• Parallel Committee: IEC/SC 34B - IEC_SC_34B
• Current Stage: 9093 - Decision to confirm - Review Enquiry
• Start Date: 31-Aug-2026
• Completion Date: 08-Sep-2026
• Directive: 2006/95/EC - Directive 2006/95/EC of the European Parliament and of the Council of 12 December 2006 on the harmonisation of the laws of Member States relating to electrical equipment designed for use within certain voltage limits (codified version)
  OJ Ref: C 71/, C 71/17 OJ Date: 28-Nov-2013
• Directive:

  ---

  2009/125/EC - Directive 2009/125/EC of the European Parliament and of the Council of 21 October 2009 establishing a framework for the setting of ecodesign requirements for energy-related products
• Directive:

  ---

  73/23/EEC - Electrical equipment designed for use within certain voltage limits
  OJ Ref: C 208
• Ref Project: SIST EN 60061-1:1999/A35:2005 - Lamp caps and holders together with gauges for the control of interchangeability and safety -- Part 1: Lamp caps

• Referred By: EN 60838-1:2017 - Miscellaneous lampholders - Part 1: General requirements and tests
• Effective Date: 03-Feb-2026
• Referred By: EN 61184:2017 - Bayonet lampholders
• Effective Date: 03-Feb-2026
• Referred By: EN 62090:2017 - Product package labels for electronic components using bar code and two- dimensional symbologies
• Effective Date: 03-Feb-2026
• Referred By: EN 60598-1:2015 - Luminaires - Part 1: General requirements and tests
• Effective Date: 03-Feb-2026
• Referred By: EN 60335-1:2012/A13:2017 - Household and similar electrical appliances - Safety - Part 1: General requirements
• Effective Date: 03-Feb-2026
• Referred By: EN IEC 60598-1:2021 - Luminaires - Part 1: General requirements and tests
• Effective Date: 03-Feb-2026
• Amends: EN 60061-1:1993 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps
• Effective Date: 28-Jan-2023

Overview

EN 60061-1:1993/A35:2005 is a key European standard published by CLC (European Committee for Electrotechnical Standardization) that specifies requirements for lamp caps and holders, with a focus on ensuring interchangeability and safety. Part 1 of the series is dedicated specifically to lamp caps. This amendment (A35) updates the original EN 60061-1:1993 standard in alignment with IEC 60061-1:1969/A35:2004, reflecting the latest technical consensus and safety protocols as of 2005.

The standard supports manufacturers, designers, and safety inspectors by providing precise definitions and specifications for lamp caps and the associated gauges used to verify correct interchangeability of lamps in various applications. Compliance ensures that lamp caps are standardized to fit socket types safely, minimizing electrical hazards and improving product compatibility across international markets.

Key Topics

• Lamp Caps Specifications: Detailed classifications of lamp caps by size, type, and connection style including screw caps (E10, E11, E14, E26, E27, E40), bayonet caps (B15d, B22d, BA9, BAY15d), bi-pin caps (G1.27, G2.54, G13), pre-focus caps, and projector lamp caps.
• Gauges for Interchangeability: Tools and measurement methods to test lamp cap dimensions and tolerances, ensuring lamps fit properly within holders and comply with safety requirements.
• Safety Requirements: Standards aimed at preventing electrical shock, short-circuiting, and mechanical failures by defining controlled design parameters.
• Harmonization with IEC Standards: The European standard follows IEC 60061-1 modifications closely, facilitating international compliance and cross-border trade of lighting components.
• Amendment A35 Specifics: Updates and clarifications included in this amendment to maintain up-to-date safety and interoperability guidance.

Applications

This standard is vital in numerous practical settings and industries including:

• Lighting Manufacturing: Helps manufacturers design lamp caps that meet strict safety and compatibility requirements, facilitating mass production and market acceptance.
• Electrical Equipment Design: Engineers designing lamps, fixtures, and lighting assemblies rely on this standard to ensure their products will perform safely with commonly used lamp caps.
• Safety Inspection and Quality Control: Regulatory bodies and quality assurance teams use the prescribed gauges and testing methods to verify that lighting products meet safety norms before market release.
• Retail and Distribution: Ensures end-users and wholesalers that replacement lamps will fit existing holders seamlessly and safely, enhancing customer confidence.
• International Trade: Supports uniform standards across CENELEC member countries, enabling lamp caps and holders to be standardized within Europe and aligning with worldwide IEC standards.

Related Standards

• IEC 60061 Series: The international standard series on lamp caps and holders, of which EN 60061-1 is the European adoption; subsequent parts cover lamp holders and testing gauges.
• EN 60061-2: Covers lamp holders, complementing Part 1 by detailing the socket-side requirements.
• IEC 60364: General electrical installation standard that often references lamp cap safety provisions.
• CENELEC Internal Regulations: Rules guiding adoption and compliance of CENELEC members with amendments such as EN 60061-1/A35.

---

By adhering to EN 60061-1:1993/A35:2005, manufacturers and stakeholders ensure that lamp caps meet rigorous standards of interchangeability and safety, promoting product reliability, user protection, and consistent performance in lighting systems worldwide. For full, updated content, access to the IEC 60061 database is recommended.

SLOVENSKI SIST EN 60061-
1:1999/A35:2005
STANDARD
junij 2005
Vznožki in okovi žarnic in sijalk skupaj s kalibri za kontrolo medsebojne
zamenljivosti in varnosti – 1. del: Vznožki žarnic in sijalk (IEC 60061-
1:1969/A35:2004)
Lamp caps and holders together with gauges for the control of interchangeability
and safety - Part 1: Lamp caps (IEC 60061-1:1969/A35:2004)
ICS 29.140.10 Referenčna številka
©  Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno

EUROPEAN STANDARD EN 60061-1/A35
NORME EUROPÉENNE
EUROPÄISCHE NORM January 2005

ICS 29.140.10
English version
Lamp caps and holders together with gauges
for the control of interchangeability and safety
Part 1: Lamp caps
(IEC 60061-1:1969/A35:2004)
Culots de lampes et douilles  Lampensockel und -fassungen
ainsi que calibres pour le contrôle sowie Lehren zur Kontrolle
de l'interchangeabilité et de la sécurité der Austauschbarkeit und Sicherheit
Partie 1: Culots de lampes Teil 1: Lampensockel
(CEI 60061-1:1969/A35:2004) (IEC 60061-1:1969/A35:2004)

This amendment A35 modifies the European Standard EN 60061-1:1993; it was approved by CENELEC
on 2004-12-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this amendment the status of a national standard without any
alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This amendment exists in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CENELEC member into its own language and notified to the
Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden,
Switzerland and United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels

© 2005 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.

Ref. No. EN 60061-1:1993/A35:2005 E

Foreword
The text of document 34B/1165/FDIS, future amendment 35 to IEC 60061-1:1969, prepared by
SC 34B, Lamp caps and holders, of IEC TC 34, Lamps and related equipment, was submitted to the
IEC-CENELEC parallel vote and was approved by CENELEC as amendment A35 to
EN 60061-1:1993 on 2004-12-01.
The following dates were fixed:
– latest date by which the amendment has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2005-09-01
– latest date by which the national standards conflicting
with the amendment have to be withdrawn (dow) 2007-12-01
__________
Endorsement notice
The text of amendment 35:2004 to the International Standard IEC 60061-1:1969 was approved by
CENELEC as an amendment to the European Standard without any modification.
__________
NORME CEI
INTERNATIONALE IEC
INTERNATIONAL 60061-1
STANDARD
AMENDEMENT 35
AMENDMENT 35
2004-11
Amendement 35
Culots de lampes et douilles ainsi que calibres

pour le contrôle de l'interchangeabilité
et de la sécurité –
Partie 1:
Culots de lampes
Amendment 35
Lamp caps and holders together with
gauges for the control of interchangeability
and safety –
Part 1:
Lamp caps
Les feuilles de cet amendement sont à insérer dans la
CEI 60061-1 (2003)
The sheets contained in this amendment are to be inserted
in IEC 60061-1 (2003)
© IEC 2004 Droits de reproduction réservés ⎯ Copyright - all rights reserved
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: [phone] Telefax: [phone] E-mail: [e-mail] Web: www.iec.ch
CODE PRIX
Commission Electrotechnique Internationale
J
International Electrotechnical Commission PRICE CODE
Международная Электротехническая Комиссия
Pour prix, voir catalogue en vigueur
For price, see current catalogue

60061-1 Amend. 35 © CEI/IEC:2004
INSTRUCTIONS POUR L'INSERTION DES INSTRUCTIONS FOR THE INSERTION OF NEW
NOUVELLES PAGES ET FEUILLES DE NORMES PAGES AND STANDARD SHEETS IN IEC 60061-1
DANS LA CEI 60061-1
1. Retirer la page de titre existante, les pages 1, 2, 3 1. Remove existing title page, existing pages 1, 2, 3
et 4 existantes et le sommaire par désignation and 4 and existing contents by designation (pages
existant (pages 1/3, 2/3 et 3/3), et insérer la 1/3, 2/3 and 3/3) and insert in their place new title
nouvelle page de titre, les nouvelles pages 1, 2, 3 et page, new pages 1, 2, 3 and 4 and new contents by
4 ainsi que le nouveau sommaire par désignation designation (pages 1/3, 2/3 and 3/3).
(pages 1/3 , 2/3 et 3/3).
2. Retirer les feuilles existantes 2. Remove existing sheets
7004-33-3 (pages 1/2 et 2/2) 7004-33-3 (pages 1/2 and 2/2)
7004-127-1 (pages 1/7, 2/7, 3/7, 4/7, 5/7, 6/7 et 7/7) 7004-127-1 (pages 1/7, 2/7, 3/7, 4/7, 5/7, 6/7 and
7/7)
et les remplacer par les feuilles and insert in their place sheets
7004-33-4 (pages 1/2 et 2/2) 7004-33-4 (pages 1/2 and 2/2)
7004-127-2 (pages 1/7, 2/7, 3/7, 4/7, 5/7, 6/7 et 7/7) 7004-127-2 (pages 1/7, 2/7, 3/7, 4/7, 5/7, 6/7 and
7/7)
60061-1 Amend. 35 © CEI/IEC:2004
AVANT-PROPOS
Le présent amendement a été établi par le sous-comité 34B: Culots et douilles, du
comité d’études 34 de la CEI: Lampes et équipements associés.
Le texte de cet amendement est issu des documents suivants
FDIS Rapport de vote
34B/1165/FDIS 34B/1181/RVD
Le rapport de vote indiqué dans le tableau ci-dessus donne toute information sur le
vote ayant abouti à l'approbation de cet amendement.
Le comité a décidé que le contenu de cet amendement et de la publication de base ne
sera pas modifié avant la date de maintenance indiquée sur le site web de la CEI
sous "http://webstore.iec.ch" dans les données relatives à la publication recherchée.
A cette date, la publication sera
• reconduite;
• supprimée;
• remplacée par une édition révisée, ou
• amendée.
__________
FOREWORD
This amendment has been prepared by subcommittee 34B: Lamp caps and holders, of
IEC technical committee 34: Lamps and related equipment.
The text of this amendment is based on the following documents:
FDIS Report on voting
34B/1165/FDIS 34B/1181/RVD
Full information on the voting for the approval of this amendment can be found in the
report on voting indicated in the above table.
The committee has decided that the contents of this amendment and the base
publication will remain unchanged until the maintenance result date indicated on the
IEC web site under "http://webstore.iec.ch" in the data related to the specific
publication. At this date, the publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
_____________
NORME CEI
INTERNATIONALE IEC
INTERNATIONAL
60061-1
STANDARD
Edition 3.35
2004-11
Modifiée selon les Compléments:
Amended in accordance with Supplements:
A(1970), B(1971), C(1972), D(1972), E(1972), F(1975), G(1977)
H(1977), J(1980), K(1983), L(1987), M(1989), N(1992), P(1994)
Q(1994), R(1995), S(1996), T(1996), U(1996), V(1997),
et les amendements/amendments 21(1998), 22(1999), 23(1999), 24(2000),
25(2001), 26(2001), 27(2001), 28(2002), 29(2002), 30(2002),
31(2003), 32(2003), 33(2003), 34(2004) et/and 35(2004)

Culots de lampes et douilles ainsi que calibres
pour le contrôle de l'interchangeabilité
et de la sécurité –
Partie 1:
Culots de lampes
Lamp caps and holders together with
gauges for the control of interchangeability
and safety –
Part 1:
Lamp caps
© IEC 2004 Droits de reproduction réservés ⎯ Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in
utilisée sous quelque forme que ce soit et par aucun procédé, any form or by any means, electronic or mechanical,
électronique ou mécanique, y compris la photocopie et les including photocopying and microfilm, without permission in
microfilms, sans l'accord écrit de l'éditeur. writing from the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: [phone] Telefax: [phone] E-mail: [e-mail] Web: www.iec.ch
Commission Electrotechnique Internationale
International Electrotechnical Commission
Международная Электротехническая Комиссия

60061-1 Amend. 35 © CEI/IEC:2004 – 1 –

SOMMAIRE CONTENTS
SOMMAIRE PAR DÉSIGNATION.   Pages CONTENTS BY DESIGNATION.       Page
PRÉAMBULE. 4 FOREWORD. 5
PRÉFACE. 4 PREFACE. 5

Feuilles Sheet
Culots à deux broches G1.27, GX1.27 & GY1.3 . 7004-2-2 Bi-pin caps G1.27, GX1.27 & GY1.3. 7004-2-2
Culots à deux broches G2.54, GX2.54 & GY2.5 . 7004-3-2 Bi-pin caps G2.54, GX2.54 & GY2.5. 7004-3-2
Culots à deux broches G3.17 & GY3.2 . 7004-4-2 Bi-pin caps G3.17 & GY3.2 . 7004-4-2
Culots PX26d . 7004-5-6 Caps PX26d. 7004-5-6
Culots à vis E11 . 7004-6-1 Screw caps E11 . 7004-6-1
Culots à vis EY10 . 7004-7-1 Screw caps EY10 . 7004-7-1
Culots à baïonnette BAX9s. 7004-8-1 Bayonet caps BAX9s . 7004-8-1
Culots à baïonnette BAY9s. 7004-9-1 Bayonet caps BAY9s . 7004-9-1
Culots B22d. 7004-10-7 Caps B22d . 7004-10-7
Culot à baïonnette B22d-3(90°/135°)/25x26. 7004-10A-2 Bayonet cap B22d-3(90°/135°)/25x26 . 7004-10A-2
Culots B15d. 7004-11-6 Caps B15d . 7004-11-6
Culots à baïonnette BA15 . 7004-11A-9 Bayonet caps BA15. 7004-11A-9
Culots à baïonnette BAY15d . 7004-11B-7 Bayonet caps BAY15d. 7004-11B-7
Culots BAZ15 . 7004-11C-3 Caps BAZ15. 7004-11C-3
Culots à baïonnette BA15s-3 . 7004-11D-1 Bayonet caps BA15s-3. 7004-11D-1
Culots BAW15. 7004-11E-1 Caps BAW15 . 7004-11E-1
Culots à baïonnette BA20 . 7004-12-7 Bayonet caps BA20. 7004-12-7
Culots à baïonnette pour automobiles Bayonet automobile caps
BA21-3(120°) . 7004-13-4 BA21-3(120°). 7004-13-4
Culot à baïonnette BA9. 7004-14-8 Bayonet caps BA9. 7004-14-8
Culot à baïonnette BA7. 7004-15-2 Bayonet cap BA7 . 7004-15-2
Culot à baïonnette BY22d. 7004-17-3 Bayonet cap BY22d . 7004-17-3
Culots à baïonnette BAX15d . 7004-18-1 Bayonet caps BAX15d. 7004-18-1
Culots BAU15. 7004-19-2 Caps BAU15 . 7004-19-2
Connecteur des lampes terminées G16d. 7004-20-2 Termination on finished lamps G16d . 7004-20-2
Culots à vis E27 . 7004-21-9 Screw caps E27 . 7004-21-9
Culots à vis E26 . 7004-21A-2 Screw caps E26 . 7004-21A-2
Culots à vis E10 . 7004-22-6 Screw caps E10 . 7004-22-6
Culots à vis E14 . 7004-23-6 Screw caps E14 . 7004-23-6
Culots à vis E40 . 7004-24-6 Screw caps E40 . 7004-24-6
Culots à vis E39 . 7004-24A-1 Screw caps E39 . 7004-24A-1
Culot à vis E5. 7004-25-3 Screw cap E5. 7004-25-3
Culot à vis E17. 7004-26-2 Screw cap E17. 7004-26-2
Culot à vis E27/51x39. 7004-27-3 Screw cap E27/51x39. 7004-27-3
Culot à vis E12. 7004-28-2 Screw cap E12. 7004-28-2
Culot à vis à double contact E26d . 7004-29-2 Double contact screw cap E26d. 7004-29-2
Culots à vis préfocus EP10 . 7004-30-2 Prefocus screw caps EP10. 7004-30-2
Culots préfocus P20d, PX20d, PY20d & PZ20d. 7004-31-2 Prefocus caps P20d, PX20d, PY20d & PZ20d. 7004-31-2
Culots préfocus P22d & PX22d. 7004-32-2 Prefocus caps P22d & PX22d . 7004-32-2
Culots 2G13 . 7004-33-4 Caps 2G13. 7004-33-4
Culots préfocus - Assemblage de la collerette Prefocus caps - Assembly of ring and cap
et du culot sur lampes terminées PX43t . 7004-34-2 on finished lamps PX43t. 7004-34-2
Culot préfocus PX13.5s . 7004-35-2 Prefocus cap PX13.5s . 7004-35-2
Culot préfocus P26s sur la lampe terminée . 7004-36-1 Prefocus cap P26s on finished lamp . 7004-36-1
Culots préfocus - Assemblage de la collerette Prefocus caps - Assembly of ring and
et du culot sur lampes terminées PKX22s. 7004-37-2 cap on finished lamps PKX22s. 7004-37-2
Culots préfocus - Assemblage de la collerette Prefocus caps - Assembly of collar and cap
et du culot sur lampes terminées P18s. 7004-38-3 on finished lamps P18s . 7004-38-3

IEC 60061-1
CEI 60061-1
60061-1 Amend. 35 © CEI/IEC:2004 – 2 –

Feuilles Sheet
Culots préfocus P43t. 7004-39-6 Prefocus caps P43t . 7004-39-6
Culot préfocus P13.5s . 7004-40-2 Prefocus cap P13.5s . 7004-40-2
Culot préfocus P38s . 7004-41-2 Prefocus cap P38s . 7004-41-2
Culot préfocus P46s . 7004-41A-2 Prefocus cap P46s . 7004-41A-2
Culots préfocus P28s. 7004-42-7 Prefocus caps P28s. 7004-42-7
Culots préfocus P40s. 7004-43-5 Prefocus caps P40s. 7004-43-5
Culot préfocus P30s-10.3. Assemblage sur lampes Prefocus cap P30s-10.3. Assembly on finished
terminées . 7004-44-3 lamps . 7004-44-3
Culots de lampes de projection sur lampes Projector lamp caps on finished lamps G17q-7,
terminées G17q-7, GX17q-7 & GY17q-7 . 7004-45-3 GX17q-7 & GY17q-7 . 7004-45-3
Culots préfocus - Assemblage de la collerette et du Prefocus caps - Assembly of ring and cap on
culot sur la lampe terminée P14.5s. 7004-46-2 finished lamp P14.5s. 7004-46-2
Culot préfocus PK22s . 7004-47-4 Prefocus cap PK22s . 7004-47-4
Culot préfocus PG22-6.35. Assemblage de la Prefocus cap PG22-6.35. Assembly of collar and
collerette et du culot sur la lampe terminée. 7004-48-1 cap on finished lamp . 7004-48-1
Culots préfocus P36 . 7004-49-3 Prefocus caps P36 . 7004-49-3
Culots à deux broches G13 . 7004-51-8 Bi-pin caps G13. 7004-51-8
Culots à deux broches G5 . 7004-52-5 Bi-pin caps G5. 7004-52-5
Culot à deux broches G20. 7004-53-2 Bi-pin cap G20 . 7004-53-2
Culot G10q. 7004-54-3 Cap G10q. 7004-54-3
Culot à broche Fa6 . 7004-55-3 Single-pin cap Fa6. 7004-55-3
Culot à deux contacts en retrait R17d sur lampes Recessed double contact cap R17d on finished
terminées . 7004-56-2 lamps . 7004-56-2
Culots à broche Fa8 . 7004-57-2 Single-pin caps Fa8. 7004-57-2
Culot à broche et extrémité de la lampe pour Single-pin cap and end of lamp for tubular
lampes tubulaires Fa4 . 7004-58-1 lamps Fa4 . 7004-58-1
Socles à deux broches prévus ou non pour l'emploi Bi-pin bases with and without provision for use with
de refroidissseurs G6.35, GX6.35 & GY6.35. 7004-59-6 heat sinks G6.35, GX6.35, & GY6.35. 7004-59-6
Socle à deux broches GZ6.35 . 7004-59A-3 Bi-pin lamp base GZ6.35. 7004-59A-3
Culots pour lampes tubulaires à deux culots Caps for double-capped tubular lamps
S15s & S19s . 7004-60-2 S15s & S19s . 7004-60-2
Culot à collet SX6s . 7004-61-1 Flanged cap SX6s. 7004-61-1
Culot à rainure S5.7s. 7004-62-1 Grooved cap S5.7s . 7004-62-1
Culots sur lampe terminée G12 . 7004-63-2 Caps on finished lamps G12 . 7004-63-2
Culots sur lampe terminée PG12 & PGX12. 7004-64-3 Caps on finished lamps PG12 & PGX12. 7004-64-3
Culot et socle de lampe à quatre broches GX38q. 7004-65-1 Four-pin cap and lamp base GX38q . 7004-65-1
Culots préfocus P29t. 7004-66-1 Prefocus caps P29t . 7004-66-1
Socle de lampe à deux broches GZ4. 7004-67-3 Bi-pin lamp base GZ4 . 7004-67-3
Culot GR8 . 7004-68-3 Cap GR8. 7004-68-3
Culot à deux broches G23. 7004-69-1 Bi-pin cap G23 . 7004-69-1
Culot à deux broches G9.5. 7004-70-2 Bi-pin cap G9.5 . 7004-70-2
Culot à deux broches GX9.5. 7004-70A-1 Bi-pin cap GX9.5 . 7004-70A-1
Culots à deux broches Bi-pin caps
GY9.5, GZ9.5, GZX9.5, GZY9.5 & GZZ9.5. 7004-70B-4 GY9.5, GZ9.5, GZX9.5, GZY9.5 & GZZ9.5. 7004-70B-4
Socle du cube flash . 7004-71-3 Base of flashcube . 7004-71-3
Socle de lampe à deux broches G4. 7004-72-3 Bi-pin lamp base G4 . 7004-72-3
Socle de lampe à deux broches GY4 . 7004-72A-1 Bi-pin lamp base GY4. 7004-72A-1
Culot à deux broches G5.3. 7004-73-2 Bi-pin cap G5.3 . 7004-73-2
Socle à deux broches GX5.3. 7004-73A-2 Bi-pin base GX5.3. 7004-73A-2
Socle à deux broches GY5.3. 7004-73B-2 Bi-pin base GY5.3. 7004-73B-2
Culot à deux broches GY16. 7004-74-2 Bi-pin cap GY16 . 7004-74-2
Culot et socle à deux broches G22 . 7004-75-3 Bi-pin cap and base G22 . 7004-75-3
Culots et socle de lampe à deux broches G38. 7004-76-1 Bi-pin caps and lamp base G38 . 7004-76-1
Culot GR10q . 7004-77-2 Cap GR10q. 7004-77-2
Culots G24, GX24 & GY24 . 7004-78-5 Caps G24, GX24 & GY24 . 7004-78-5

IEC 60061-1
CEI 60061-1
60061-1 Amend. 35 © CEI/IEC:2004 – 3 –

Feuilles Sheet
Culots P11.5d. 7004-79-1 Caps P11.5d. 7004-79-1
Culots pour lampes plafonnier SV7. 7004-80-7 Festoon caps SV7. 7004-80-7
Culots pour lampes plafonnier SV8.5. 7004-81-4 Festoon caps SV8.5. 7004-81-4
Culot 2G11. 7004-82-1 Cap 2G11. 7004-82-1
Culots pour lampes tubulaires à radiation Caps for tubular infra-red
infrarouge SK15s . 7004-83-1 lamps SK15s. 7004-83-1
Culots sur lampes terminées GX10q . 7004-84-2 Caps on finished lamps GX10q . 7004-84-2
Culots sur lampes terminées GY10q . 7004-85-2 Caps on finished lamps GY10q . 7004-85-2
Culot à deux broches GX23. 7004-86-1 Bi-pin cap GX23 . 7004-86-1
Culots sur lampes terminées G32, GX32 & GY32 . 7004-87-2 Caps on finished lamps G32, GX32 & GY32. 7004-87-2
Culots préfocus - Assemblage de la collerette Prefocus caps - Assembly of ring and cap
et du culot sur lampes terminées PY43d . 7004-88-2 on finished lamps PY43d . 7004-88-2
Culot préfocus - Assemblage de la collerette Prefocus cap - Assembly of ring and cap
et du culot sur lampes terminées PZ43t. 7004-89-2 on finished lamps PZ43t . 7004-89-2
Socle de lampe flash W10.6x8.5d . 7004-90-2 Base of photo-flash lamp W10.6x8.5d . 7004-90-2
Socle de lampe W2.1x9.5d . 7004-91-3 Lamp base W2.1x9.5d . 7004-91-3
Culot à un contact encastré et extrémité de la Recessed single contact cap and end of
lampe R7s. 7004-92-3 lamp R7s. 7004-92-3
Culot à un contact encastré et extrémité de la Recessed single contact cap and end of
lampe RX7s. 7004-92A-4 lamp RX7s.
...