Product package labels for electronic components using bar code and two- dimensional symbologies

IEC 62090:2017(E) applies to labels on the packaging of electronic components for automatic handling in B2B processes. These labels use linear bar code and two-dimensional (2D) symbols. Labels for direct product marking and shipping labels are excluded. Labels required on the packaging of electronic components that are intended for the retail channel of distribution in B2C processes are also excluded from this document. Bar code and 2D symbol markings are used, in general, for automatic identification and automatic handling of components in electronics assembly lines. Intended applications include systems that automate the control of component packages during production, inventory and distribution. This edition includes the following significant technical changes with respect to the previous edition: a) Applicable data elements have been added. Data identifiers of those data elements are “10D”, “14D”, ”2P”, “25L”, “18V”, “V”, “J”, “3S”, “13E”, “33L” and “34L”. b) The following new informative annexes have been added: - Annex C, URL; - Annex D, Examples of data element short titles; - Annex E, Package levels for component package labels.

Etiketten für Verpackungen elektronischer Bauelemente unter Anwendung von Strichcodierung und zweidimensionaler Symbologien

Etiquettes d'emballage de produits pour composants électroniques, utilisant un code à barres et une symbologie bidimensionelle

L'IEC 62090:2017 s’applique aux étiquettes apposées sur l’emballage des composants électroniques pour opérations automatisées dans les processus B2B. Ces étiquettes utilisent un code à barres linéaire et des symboles bidimensionnels (2D). Les étiquettes pour le marquage de produit direct et les étiquettes de transport sont exclues. Les étiquettes exigées sur l’emballage des composants électroniques qui sont destinés au circuit de distribution de détail dans les processus B2C sont aussi exclues du présent document. En général, le code à barres et les marquages de symboles 2D sont utilisés pour l’identification et la manipulation automatiques de composants dans les chaînes de montage en électronique. Les applications prévues comprennent des systèmes qui automatisent le contrôle des emballages de composants pendant la production, l’inventaire et la distribution. Cette édition inclut les modifications techniques majeures suivantes par rapport à l’édition précédente: a) Ajout d’éléments de données applicables: Les identificateurs de données des éléments de données sont “ 10D ”, “ 14D ”, “ 2P ”, “ 25L ”, “ 18V ”, “ V ”, “ J ”, “ 3S ”, “ 13E ”, “ 33L ” et “ 34L ”. b) Ajout des nouvelles annexes informatives suivantes: - Annexe C, URL; - Annexe D, Exemples de titres abrégés pour des éléments de données; - Annexe E, Niveaux d’emballage pour les étiquettes d’emballage de composants.

Označbe za pakiranje elektronskih komponent s črtnimi kodami in dvodimenzionalnimi simboli

Ta dokument se uporablja za oznake na embalaži elektronskih komponent za samodejno upravljanje pri procesih B2B. Na teh oznakah so uporabljene linearne črtne kode in dvodimenzonalni (2D) simboli. Oznake za neposredno označevanje izdelkov in oznake za dobavo so izključene. Oznake, ki so zahtevane na embalaži elektronskih komponent, ki so namenjene prodajnemu kanalu distribucije pri procesih B2C, ravno tako niso zajete v tem dokumentu.
Splošno gledano se uporabljajo črtna koda in simbolne oznake 2D za samodejno prepoznavanje in upravljanje komponent na tekočih trakovih za elektroniko. Med namensko uporabo spadajo sistemi, ki omogočajo avtomatizacijo kontrole paketov komponent med proizvodnjo, ustvarjanjem inventarja in distribucijo.

General Information

Status
Published
Publication Date
06-Jul-2017
Withdrawal Date
15-May-2020
Current Stage
6060 - Document made available - Publishing
Start Date
07-Jul-2017
Completion Date
07-Jul-2017

Relations

Buy Standard

Standard
EN 62090:2018 - BARVE
English language
34 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-marec-2018
1DGRPHãþD
SIST EN 62090:2003
2]QDþEH]DSDNLUDQMHHOHNWURQVNLKNRPSRQHQWVþUWQLPLNRGDPLLQ
GYRGLPHQ]LRQDOQLPLVLPEROL
Product package labels for electronic components using bar code and two- dimensional
symbologies
Etiketten für Verpackungen elektronischer Bauelemente unter Anwendung von
Strichcodierung und zweidimensionaler Symbologien
Etiquettes d'emballage de produits pour composants électroniques, utilisant un code à
barres et une symbologie bidimensionelle
Ta slovenski standard je istoveten z: EN 62090:2017
ICS:
31.190 Sestavljeni elektronski Electronic component
elementi assemblies
35.040.50 Tehnike za samodejno Automatic identification and
razpoznavanje in zajem data capture techniques
podatkov
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN 62090
NORME EUROPÉENNE
EUROPÄISCHE NORM
July 2017
ICS 31.190; 31.200; 35.040 Supersedes EN 62090:2003
English Version
Product package labels for electronic components using bar
code and two- dimensional symbologies
(IEC 62090:2017)
Etiquettes d'emballage de produits pour composants Etiketten für Verpackungen elektronischer Bauelemente
électroniques, utilisant un code à barres et une symbologie unter Anwendung von Strichcodierung und
bidimensionelle zweidimensionaler Symbologien
(IEC 62090:2017) (IEC 62090:2017)
This European Standard was approved by CENELEC on 2017-05-16. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 62090:2017 E
European foreword
The text of document 91/1394/CDV, future edition 2 of IEC 62090, prepared by IEC/TC 91 "Electronics
assembly technology" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC
as EN 62090:2017.
The following dates are fixed:
(dop) 2018-02-16
• latest date by which the document has to be
implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2020-05-16
standards conflicting with the
document have to be withdrawn
This document supersedes EN 62090:2003.

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Endorsement notice
The text of the International Standard IEC 62090:2017 was approved by CENELEC as a European
Standard without any modification.
IEC 60194 NOTE Harmonized as EN 60194.
IEC 60286-1 NOTE Harmonized as EN 60286-1.
IEC 60286-2 NOTE Harmonized as EN 60286-2.
IEC 60286-3 NOTE Harmonized as EN 60286-3.
IEC 60286-4 NOTE Harmonized as EN 60286-4.
IEC 60286-5 NOTE Harmonized as EN 60286-5.
IEC 60286-6 NOTE Harmonized as EN 60286-6.
IEC 61760-4 NOTE Harmonized as EN 61760-4.
ISO/IEC 15416 NOTE Harmonized as EN ISO/IEC 15416.
ISO/IEC 15438 NOTE Harmonized as EN ISO/IEC 15438.
ISO 3166-1 NOTE Harmonized as EN ISO 3166-1.

Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant

EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu.
Publication Year Title EN/HD Year
ISO 8601 -  Data elements and interchange formats - - -
Information interchange - Representation
of dates and times
ISO/IEC 15417 -  Information technology - Automatic - -
identification and data capture techniques -
Code 128 bar code symbology
specification
ISO/IEC 15418 -  Information technology - Automatic - -
identification and data capture techniques -
GS1 Application Identifiers and ASC MH10
Data Identifiers and maintenance
ISO/IEC 15434 -  Information technology - Automatic - -
identification and data capture techniques -
Syntax for high-capacity ADC media
ISO/IEC 15459 series Information technology - Automatic - series
identification and data capture techniques -
Unique identification
ISO/IEC 16022 -  Information technology - Automatic - -
identification and data capture techniques -
Data Matrix bar code symbology
specification
ISO/IEC 16388 -  Information technology - Automatic - -
identification and data capture techniques -
Code 39 bar code symbology specification
ISO/IEC 18004 -  Information technology - Automatic - -
identification and data capture techniques -
QR Code bar code symbology specification
ISO/IEC 19762 -  Information technology - Automatic - -
identification and data capture (AIDC)
techniques - Harmonized vocabulary
ANSI MH 10.8.2 -  Data Identifier and Application Identifier - -
Standard
IEC 62090 ®
Edition 2.0 2017-04
INTERNATIONAL
STANDARD
colour
inside
Product package labels for electronic components using bar code and two-

dimensional symbologies
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 31.190; 31.200; 35.040.50 ISBN 978-2-8322-4160-8

– 2 – IEC 62090:2017 © IEC 2017
CONTENTS
FOREWORD . 4
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 7
4 Label data content and requirements . 7
4.1 Data elements – general . 7
4.2 Mandatory data elements . 8
4.2.1 Manufacturer item identification – DI “1P” and “25P” . 8
4.2.2 Customer product code – DI “P” . 8
4.2.3 Manufacturer identification – DI “18V” and “21V” . 8
4.2.4 Quantity – DI “Q” and “7Q” . 8
4.2.5 Traceability identification – DI “S” and “25S”, “1T” and “25T” . 9
4.2.6 Country of origin – DI “4L” . 9
4.2.7 Production date – DI “16D” . 9
4.2.8 Package identification – DI “J” and “3S” . 9
4.3 Optional data elements . 10
4.3.1 Expiration date – DI “14D” . 10
4.3.2 Revision level – DI “2P” . 10
4.3.3 EIAJ ID – DI “3N” . 10
4.3.4 Manufacturer location – DI “25L” . 10
4.3.5 Customer assigned supplier code – DI “V” . 10
4.3.6 Moisture sensitivity level – DI “13E” . 11
4.3.7 URL – DI “33L” and “34L” . 11
4.4 Data semantics and formats defined by the data identifiers . 11
4.5 Data representation . 13
4.5.1 General formatting . 13
4.5.2 General formatting for machine-readable symbols . 14
4.5.3 General formatting for human-readable information . 14
4.6 Data carrier selection . 15
4.6.1 Linear bar code symbols . 15
4.6.2 Two-dimensional (2D) symbols . 16
4.7 Label size, layout, and location . 17
4.7.1 Label size . 17
4.7.2 Label layout . 17
4.7.3 Examples of label and label layout . 17
4.7.4 Label location . 18
Annex A (informative) Quality aspects of labels – Adhesive characteristics and
durability of marking . 20
A.1 General . 20
A.2 Recommendations . 20
A.2.1 General . 20
A.2.2 Adhesion characteristics . 20
A.2.3 Use and protection . 20
A.2.4 Storage conditions . 21
A.2.5 Durability . 21
A.2.6 Blank label stock contamination . 21
A.3 Method of test . 21

IEC 62090:2017 © IEC 2017 – 3 –
A.3.1 Adhesive strength . 21
A.3.2 Blank label stock contamination . 21
A.3.3 Recyclability . 22
Annex B (informative) ISO/IEC 15434 Data Transfer Syntax . 23
Annex C (informative) URL . 24
C.1 General . 24
C.2 Principle of using the URL DI “33L” . 24
C.3 Principle of using the P2P URL DI “34L” . 25
C.4 Implementation of product to internet communication by help of P2P data
identifier “34L” . 25
Annex D (informative) Examples of data element short titles . 27
Annex E (informative) Package levels for component package labels . 28
E.1 Inner and outer product packages . 28
E.2 "Unit load packages" / "handling units" / "overpacks" .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.