Nuclear facilities - Instrumentation and control systems - Design, location and application criteria for installed area gamma radiation dose rate monitoring equipment for use during normal operation and anticipated operational occurrences

See the scope of IEC 61031:2020. Adoption of IEC 61031:2020 is to be done without modification.

Kerntechnische Anlagen - Leittechnische Systeme - Auslegungs-, Anordnungs- und Anwendungskriterien für fest installierte Einrichtungen zur Umgebungsüberwachung der Gammadosisleistung zum Einsatz während Normalbetrieb und bei anzunehmenden betrieblichen Ereignissen

Installations nucléaires - Systèmes d'instrumentation et de contrôle-commande - Critères de conception, d'implantation et d'application pour les matériels de surveillance du débit de dose de rayonnement gamma à poste fixe, utilisés pendant le fonctionnement normal et lors d'incidents de fonctionnement prévus

IEC 61031:2020 s'applique à la conception, l'implantation et l'application des matériels à poste fixe destinés à la surveillance locale des débits de dose de rayonnement gamma dans les installations nucléaires pour le fonctionnement normal et les incidents de fonctionnement prévus. Le matériel de surveillance du débit de dose de rayonnement gamma à large gamme pour les conditions accidentelles est actuellement couvert par l'IEC 60951-1 et l'IEC 60951-3; il n'entre pas dans le domaine d'application du présent document. Le présent document fournit des lignes directrices pour les principes de conception, l'implantation, l'application, l'étalonnage, le fonctionnement et les essais du matériel à poste fixe destiné à la surveillance permanente des débits de dose de rayonnement gamma local dans les installations nucléaires, dans des conditions de fonctionnement normal et d'incidents de fonctionnement prévus. Ces appareils sont généralement appelés moniteurs de rayonnement de zone. Des appareils portatifs sont également utilisés dans ce but, mais ne sont pas couverts par le présent document. Le présent document est destiné à être utilisé conjointement avec l'IEC 60532:2010. Cette deuxième édition annule et remplace la première édition parue en 1990. Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente: a. extension du domaine d'application de la norme des centrales nucléaires de puissance aux installations nucléaires et alignement du titre en conséquence; b.prise en compte des normes pertinentes publiées par le SC 45A de l'IEC depuis la publication de la première édition et référence à ces normes, le cas échéant.

Jedrski objekti - Merilna in nadzorna oprema - Načrtovanje, lokacija in merila za uporabo vgrajene opreme za območno nadzorovanje stopnje sevanja gama med normalnim obratovanjem in ob pričakovanih obratovalnih dogodkih (IEC 61031:2020)

Ta dokument se uporablja za načrtovanje, lokacijo in uporabo vgrajene opreme za nadzorovanje lokalne stopnje sevanja gama v jedrskih objektih med normalnim obratovanjem in ob pričakovanih obratovalnih dogodkih. Oprema za nadzorovanje stopnje sevanja gama na širšem območju ob nesrečah, ki je trenutno obravnavana v standardih IEC 60951-1 in IEC 60951-3, ne spada na področje uporabe tega dokumenta. Ta dokument se ne uporablja za merjenje stopnje nevtronskega sevanja. Če stopnja nevtronskega sevanja bistveno prispeva k skupni ekvivalentni dozi za osebje, je lahko glede na zasnovo elektrarne potrebna dodatna oprema za nadzorovanje nevtronskega sevanja. Ta dokument podaja smernice za načela načrtovanja, lokacijo, uporabo, umerjanje, delovanje in preskušanje vgrajene opreme za stalno nadzorovanje območnih stopenj sevanja gama v jedrskih objektih med normalnim obratovanjem in ob pričakovanih obratovalnih dogodkih. Za te naprave se običajno uporablja izraz »merilniki območnega sevanja«. Za ta namen se uporablja tudi prenosna oprema, ki pa je ta dokument ne zajema. Merilniki sevanja, ki se uporabljajo v opremi za nadzorovanje območnega sevanja, so obravnavani v standardu IEC 60532. Kot je navedeno v standardu IEC 60532, se lahko meritve sevanja gama izrazijo v različnih količinah, določenih v nacionalnih predpisih. Vendar se pri tovrstnih napravah najpogosteje uporablja zračna kerma (Gy) ali ekvivalentna doza H*(10)(Sv).

General Information

Status
Published
Publication Date
18-Aug-2022
Current Stage
6060 - Document made available - Publishing
Start Date
19-Aug-2022
Due Date
23-Jul-2024
Completion Date
19-Aug-2022

Buy Standard

Standard
EN IEC 61031:2022
English language
27 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN IEC 61031:2022
English language
26 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN IEC 61031:2022
01-oktober-2022
Jedrski objekti - Merilna in nadzorna oprema - Načrtovanje, lokacija in merila za
uporabo vgrajene opreme za območno nadzorovanje stopnje sevanja gama med
normalnim obratovanjem in ob pričakovanih obratovalnih dogodkih (IEC
61031:2020)
Nuclear facilities - Instrumentation and control systems - Design, location and application
criteria for installed area gamma radiation dose rate monitoring equipment for use during
normal operation and anticipated operational occurrences (IEC 61031:2020)
Kerntechnische Anlagen - Leittechnische Systeme - Auslegungs-, Anordnungs- und
Anwendungskriterien für fest installierte Einrichtungen zur Umgebungsüberwachung der
Gammadosisleistung zum Einsatz während Normalbetrieb und bei anzunehmenden
betrieblichen Ereignissen (IEC 61031:2020)
Installations nucléaires - Systèmes d'instrumentation et de contrôle-commande - Critères
de conception, d'implantation et d'application pour les matériels de surveillance du débit
de dose de rayonnement gamma à poste fixe, utilisés pendant le fonctionnement normal
et lors d'incidents de fonctionnement prévus (IEC 61031:2020)
Ta slovenski standard je istoveten z: EN IEC 61031:2022
ICS:
13.280 Varstvo pred sevanjem Radiation protection
27.120.10 Reaktorska tehnika Reactor engineering
SIST EN IEC 61031:2022 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN IEC 61031:2022

---------------------- Page: 2 ----------------------
SIST EN IEC 61031:2022


EUROPEAN STANDARD EN IEC 61031

NORME EUROPÉENNE

EUROPÄISCHE NORM August 2022
ICS 13.280; 27.120.10

English Version
Nuclear facilities - Instrumentation and control systems - Design,
location and application criteria for installed area gamma
radiation dose rate monitoring equipment for use during normal
operation and anticipated operational occurrences
(IEC 61031:2020)
Installations nucléaires - Systèmes d'instrumentation et de Kerntechnische Anlagen - Leittechnische Systeme -
contrôle-commande - Critères de conception, d'implantation Auslegungs-, Anordnungs- und Anwendungskriterien für
et d'application pour les matériels de surveillance du débit fest installierte Einrichtungen zur Umgebungsüberwachung
de dose de rayonnement gamma à poste fixe, utilisés der Gammadosisleistung zum Einsatz während
pendant le fonctionnement normal et lors d'incidents de Normalbetrieb und bei anzunehmenden betrieblichen
fonctionnement prévus Ereignissen
(IEC 61031:2020) (IEC 61031:2020)
This European Standard was approved by CENELEC on 2022-08-08. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.



European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN IEC 61031:2022 E

---------------------- Page: 3 ----------------------
SIST EN IEC 61031:2022
EN IEC 61031:2022 (E)
European foreword
This document (EN IEC 61031:2022) consists of the text of IEC 61031:2020, prepared by IEC/TC 45
"Instrumentation, control and electrical power systems of nuclear facilities".
The following dates are fixed:
• latest date by which this document has to be (dop) 2023-08-08
implemented at national level by publication of an
identical national standard or by endorsement
• latest date by which the national standards (dow) 2025-08-08
conflicting with this document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN-CENELEC shall not be held responsible for identifying any or all such
...

SLOVENSKI STANDARD
oSIST prEN IEC 61031:2022
01-julij-2022
Jedrski objekti - Merilna in nadzorna oprema - Načrtovanje, lokacija in merila za
uporabo vgrajene opreme za območno nadzorovanje stopnje sevanja gama med
normalnim obratovanjem in ob pričakovanih obratovalnih dogodkih
Nuclear facilities - Instrumentation and control systems - Design, location and application
criteria for installed area gamma radiation dose rate monitoring equipment for use during
normal operation and anticipated operational occurrences
Ta slovenski standard je istoveten z: prEN IEC 61031:2022
ICS:
13.280 Varstvo pred sevanjem Radiation protection
27.120.10 Reaktorska tehnika Reactor engineering
oSIST prEN IEC 61031:2022 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN IEC 61031:2022

---------------------- Page: 2 ----------------------
oSIST prEN IEC 61031:2022


EUROPEAN STANDARD DRAFT
prEN IEC 61031
NORME EUROPÉENNE

EUROPÄISCHE NORM

April 2022
ICS 13.280; 27.120.10 -
English Version
Nuclear facilities - Instrumentation and control systems - Design,
location and application criteria for installed area gamma
radiation dose rate monitoring equipment for use during normal
operation and anticipated operational occurrences
(IEC 61031:2020)
To be completed To be completed
(IEC 61031:2020) (IEC 61031:2020)
This draft European Standard is submitted to CENELEC members for enquiry.
Deadline for CENELEC: 2022-07-01.

The text of this draft consists of the text of IEC 61031:2020 (45A/1328/FDIS).

If this draft becomes a European Standard, CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CENELEC in three official versions (English, French, German).
A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to
the CEN-CENELEC Management Centre has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Project: 75689 Ref. No. prEN IEC 61031:2022 E

---------------------- Page: 3 ----------------------
oSIST prEN IEC 61031:2022
prEN IEC 61031:2022 (E)
European foreword
This document (prEN IEC 61031:2022) consists of the text of document IEC 61031:2020, prepared by
IEC/TC 45 "Instrumentation, control and electrical power systems of nuclear facilities"
This document is currently submitted to the CENELEC Enquiry.
The following dates are proposed:
• latest date by which the existence of this document (doa) dor + 6 months
has to be announced at national level
• latest date by which this document has to be (dop) dor + 12 months
implemented at national level by publication of an
identical national standard or by endorsement
• latest date by which the national standards (dow) dor + 36 months
conflicting with this document have to be withdrawn (to be confirmed or
modified when voting)
As stated in the nuclear safety directive 2009/71/EURATOM, Chapter 1, Article 2, item 2, Member States
are not prevented from taking more stringent safety measures in the subject-matter covered by the
Directive, in compliance with Community law.
In a similar manner, this European standard does not prevent Member States from taking more stringent
nuclear safety and/or security measures in the subject-matter covered by this standard.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 60761-1:2002 NOTE Harmonized as EN 60761-1:2004
IEC 60761-2 NOTE Harmonized as EN 60761-2
IEC 60761-3:2002 NOTE Harmonized as EN 60761-3:2004 (not mod
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.