EN 45510-2-8:2004

Guide for procurement of power station equipment - Part 2-8: Electrical equipment - Power cables

This standard gives guidance on writing the technical specification for the procurement of low voltage (LV) and medium voltage (MV) power cables for use in electricity generating stations (power stations). This Guide for procurement is not applicable to equipment for use in the nuclear reactor plant area of nuclear power stations. Other possible applications of such equipment have not been considered in the preparation of this Guide. This Guide covers power cables only for voltages up to and including Um = 41,5 kV. This Guide does not cover cables for public distribution systems, control and instrumentation systems or communications systems. For guidance on the technical specification of cables, including their installation and termination, refer to EN 45510-2-6 The equipment covered by this Guide is defined by its function rather than design type. Therefore, the guidance to the specification is stated in performance terms rather than being specified by a detailed description of the equipment to be supplied. This Guide indicates to potential purchasers how their specification should be prepared so that: - the equipment type and capacity interfaces correctly with other elements of the systems; - predicted performance is achieved; - ancillary equipment is properly sized; - reliability, availability and safety requirements are achieved; - proper consideration is given to the evaluation process and the quality measures to be applied. This Guide does not determine the type of specification (e.g. detailed, performance, functional) or the extent of supply for any given contract which is normally decided on the basis of the purchaser’s project strategy. It does not cover: - any commercial, contractual or legal issues which are normally in separate parts of an enquiry; - any allocation of responsibilities which are determined by the contract. This Guide does not prescribe the arrangement of the documents in the enquiry.

Leitfaden für die Beschaffung von Ausrüstungen für Kraftwerke - Teil 2-8: Elektrische Ausrüstung - Starkstromkabel

Guide pour l'acquisition d'équipements destinés aux centrales de production d'électricité - Partie 2-8: Equipements électriques - Câbles de puissance

Vodilo za nabavljanje opreme elektrarn – 2-8. del: Električna oprema – Elektroenergetski kabli

General Information

• Status: Published
• Publication Date: 07-Sep-2004
• Withdrawal Date: 28-Feb-2007
• ICS: 27.100 - Power stations in general
• ICS: 29.060.20 - Cables
• Technical Committee: CEN/CLC/JTC 2 - Power Engineering
• Drafting Committee: IEC/TC 20 - IEC_TC_20
• Parallel Committee: CENCLC/TC 2 - CENCLC_TC_2
• Current Stage: 9060 - Closure of 2 Year Review Enquiry - Review Enquiry
• Start Date: 04-Jun-2018
• Completion Date: 04-Jun-2018
• Directive: 93/38/EEC - Procurement procedures of entities operating in the water, energy, transport and telecommunications sectors
• Mandate: BC/CLC/92-04/1 - BC/CLC/92-04/1
• Mandate: M/BC/CEN/92/10 - Mandate to CEN/CENELEC in the field of electricity generation for the drawing-up of European standards to be used as procurement guides in public contracts and for the preparation of a programme of supporting standards
• Ref Project: SIST EN 45510-2-8:2004 - Guide for procurement of power station equipment -- Part 2-8: Electrical equipment - Power cables

Standards Content (Sample)

STANDARDVodilo za nabavljanje opreme elektrarn – 2-8. del: Električna oprema – Elektroenergetski kabliGuide for procurement of power station equipment – Part 2-8: Electrical equipment – Power cables©
Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljenoReferenčna številkaSIST EN 45510-2-8:2004(en)ICS27.100; 29.060.20

EUROPEAN STANDARD
EN 45510-2-8 NORME EUROPÉENNE EUROPÄISCHE NORM
September 2004
CEN Management Centre: CENELEC Central Secretariat: rue de Stassart, 36
B-1050 Brussels rue de Stassart, 35
B-1050 Brussels
© 2004 CEN/CENELEC - All rights of exploitation in any form and by any means reserved
worldwide for CEN national members and for CENELEC members.
Ref. No. EN 45510-2-8:2004 E
ICS 27.100; 29.060.20
English version
Guide for procurement of power station equipment Part 2-8: Electrical equipment – Power cables
Guide pour l'acquisition d'équipements destinés aux centrales de production d'électricité Partie 2-8: Equipements électriques – Câbles de puissance
Leitfaden für die Beschaffung von Ausrüstungen für Kraftwerke Teil 2-8: Elektrische Ausrüstung – Starkstromkabel
This European Standard was approved by CEN and CENELEC on 2001-03-06.
CEN and CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CENELEC Central Secretariat or to any CEN or CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN or CENELEC member into its own language and notified to the CENELEC Central Secretariat has the same status as the official versions.
CEN and CENELEC members are the national standards bodies and national electrotechnical committees, respectively, of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.

CONTENTS
Foreword.4 1
Scope.6 2
Normative references.6 3
Definitions.7 3.1
Organisational terms.7 3.2
Technical terms.8 3.3
General terms.8 4
Brief overall project description.9 4.1
Role and organisation of purchaser.9 4.2
Site location.9 4.3
Equipment task.9 4.4
Equipment to be purchased.9 4.5
Control and instrumentation.10 4.6
Electrical supplies and other services.10 4.7
Other interfaces.10 4.8 Project programme.10 4.9 Equipment identification systems.10 5 Extent of supply.10 6 Terminal points.11 7 Operational requirements.11 7.1
Operating environment.11 7.2 Manning levels.11 7.3
Normal operation.11 7.4
Operating hours.11 7.5
Start-up and shut-down.11 7.6 Abnormal conditions.11 7.7
Further operational requirements.11 8 Life expectancy.11 9 Performance requirements.12 10 Design and fabrication.12 10.1
Specific equipment features.12 10.2 Design justification.13 10.3 Material selection.13 10.4 Safety.13 10.5 Interchangeability.14 10.6
Fabrication methods.14 11 Maintenance requirements.14 12 Technical documentation requirements.14 12.1 Tender documentation.14 12.2 Contract documentation.14 13 Applicable legislation, regulations, standards and further requirements.14 13.1 Legislation and regulations.14 13.2 Standards.15 13.3 Further requirements.15 14 Evaluation criteria.15 14.1 General.15 14.2
Technical criteria.15

- 3 - EN 45510-2-8:2004
15 Quality measures.16 15.1 General.16 15.2 Approvals procedure.16 15.3 Inspection requirements.16 15.4 Non-conformity.16 16 Site factors.16 16.1 Access.16 16.2 Facilities.17 16.3 Site specific requirements.17 17 Verification of specified performance.17 17.1 General.17 17.2 Works tests.17 17.3 Tests during installation and commissioning.17 17.4 Technical conditions for trial run.17 17.5 Functional and performance tests.17 Annex A (informative)Bibliography.18 Annex B (informative)Information for selection of power cables.19

Foreword
This standard takes the form of a recommendation and is therefore entitled a “Guide”.
This Guide for procurement has been prepared by the CEN/CENELEC Joint Task Force Power Engineering (JTFPE) of which the secretariat is held by the British Standards Institution.
The text of the draft was submitted to the formal vote and was approved by CEN and CENELEC as EN 45510-2-8 on 2001-03-06.
The following dates were fixed:
- latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2005-03-01
- latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2007-03-01
This Guide for procurement has been prepared under mandates given to CEN and CENELEC by the European Commission and the European Free Trade Association.
This Guide for procurement is a part of a series of Guides mandated to cover the procurement of power station plant and equipment in conformity with European Procurement Directives. The Guides are:
EN 45510: Guide for procurement of power station equipment
Part 1: Common clauses
Part 2-1: Electrical equipment - Power transformers Part 2-2: Electrical equipment - Uninterruptible power supplies Part 2-3: Electrical equipment - Stationary batteries and chargers Part 2-4: Electrical equipment - High power static convertors Part 2-5: Electrical equipment - Motors Part 2-6: Electrical equipment - Generators Part 2-7: Electrical equipment - Switchgear and controlgear Part 2-8: Electrical equipment - Power cables Part 2-9: Electrical equipment - Cabling systems
Part 3-1: Boilers - Water tube boilers Part 3-2: Boilers - Shell boilers Part 3-3: Boilers - Boilers with fluidized bed firing
Part 4-1: Boiler auxiliaries - Equipment for reduction of dust emissions Part 4-2: Boiler auxiliaries - Gas-air, steam-air and gas-gas heaters Part 4-3: Boiler auxiliaries - Draught plant Part 4-4: Boiler auxiliaries - Fuel preparation equipment Part 4-5: Boiler auxiliaries - Coal handling and bulk storage plant Part 4-6: Boiler auxiliaries - Flue gas desulphurization ( De-SOx) plant Part 4-7: Boiler auxiliaries - Ash handling plant Part 4-8: Boiler auxiliaries - Dust handling plant Part 4-9: Boiler auxiliaries - Sootblowers Part 4-10: Boiler auxiliaries - Flue gas denitrification (De-NOx) plant
Part 5-1: Turbines - Steam turbines Part 5-2: Turbines - Gas turbines Part 5-3: Turbines - Wind turbines Part 5-4: Turbines - Hydraulic turbines, storage pumps and pump-turbines

- 5 - EN 45510-2-8:2004
Part 6-1: Turbine auxiliaries - Deaerators Part 6-2: Turbine auxiliaries - Feedwater heaters Part 6-3: Turbine auxiliaries - Condenser plant Part 6-4: Turbine auxiliaries - Pumps Part 6-5: Turbine auxiliaries - Dry cooling systems Part 6-6: Turbine auxiliaries - Wet and wet/dry cooling towers Part 6-7: Turbine auxiliaries - Moisture separator reheaters Part 6-8: Turbine auxiliaries - Cranes Part 6-9: Turbine auxiliaries - Cooling water systems
Part 7-1: Pipework and valves - High pressure piping systems Part 7-2: Pipework and valves - Boiler and high pressure piping valves
Part 8-1: Control and instrumentation
EN 45510-1 contains those clauses common to all the above Guides giving the provisions of a non equipment specific nature for use in the procurement of power station plant. EN 45510 is the responsibility of JTFPE. The so called “common clauses”, as appropriate, also appear in italics in the documents specific to particular equipment.
Where parts of the “common clauses” are omitted, this is indicated by the symbol *****.
Where minor changes have been made to sentences in the “common clauses” these are marked by a vertical line in the left margin.
In this Guide, words in bold type indicate that they have the meaning given in the definitions, clause 3.
In this Guide, words and sentences not in italics are specific to this Guide and refer to the particular equipment covered.

Scope
This standard gives guidance on writing the technical specification for the procurement of low voltage (LV) and medium voltage (MV) power cables for use in electricity generating stations (power stations). This Guide for procurement is not applicable to equipment for use in the nuclear reactor plant area of nuclear power stations. Other possible applications of such equipment have not been considered in the preparation of this Guide.
This Guide covers
...