iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CLC

EN 60439-1:1994

(Main)

Low-voltage switchgear and controlgear assemblies - Part 1: Type-tested and partially type-tested assemblies

Low-voltage switchgear and controlgear assemblies - Part 1: Type-tested and partially type-tested assemblies

This standard applies to low-voltage switchgear and controlgear assemblies (type-tested assemblies (TTA) and partially type-tested assemblies (PTTA), the rated voltage of which does not exceed 1 000 V a.c. at frequencies not exceeding 1 000 Hz, or 1 500 V d.c. This standard also applies to assemblies incorporating control and/or power equipment, the frequencies of which are higher. In this case, appropriate additional requirements shall apply. This standard applies to stationary or movable assemblies with or without enclosure. NOTE - Additional requirements for certain specific types of assemblies are given in supplementary standards. This standard applies to assemblies intended for use in connection with generation, transmission, distribution and conversion of electric energy and for the control of electric energy consuming equipment. It also applies to such assemblies designed for use under special service conditions, for example in ships, in rail vehicles, for machine tools, for hoisting equipment, or in explosive atmospheres, and for domestic (operated by unskilled persons) applications, provided that the relevant specific requirements are complied with. This standard does not apply to individual devices and self-contained components, such as motor starters, fuse switches, electronic equipment, etc., complying with their relevant standards. The object of this standard is to lay down the definitions and to state the service conditions, construction requirements, technical characteristics and tests for low-voltage switchgear and controlgear assemblies.

Niederspannung-Schaltgerätekombinationen - Teil 1: Typgeprüfte und partiell typgeprüfte Kombinationen

Ensembles d'appareillage à basse tension - Partie 1: Ensembles de série et ensembles dérivés de série

Low-voltage switchgear and controlgear assemblies - Part 1: Type-tested and partially type-tested assemblies (IEC 439-1:1992 + corrigendum Dec. 1993)

General Information

Status
Withdrawn
Publication Date
09-Jan-1994
ICS
29.130.20 - Low voltage switchgear and controlgear
Technical Committee
CLC/TC 17D - Low-voltage switchgear and controlgear assemblies
Drafting Committee
IEC/SC 17D - IEC_SC_17D
Parallel Committee
IEC/SC 17D - IEC_SC_17D
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
01-Aug-2002
Completion Date
01-Aug-2002
Directive
2004/108/EC - Directive 2004/108/EC of the European Parliament and of the Council of 15 December 2004 on the approximation of the laws of the Member States relating to electromagnetic compatibility and repealing Directive 89/336/EEC
2004/108/EU - DIRECTIVE 2004/108/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 15 December 2004 on the approximation of the laws of the Member States relating to electromagnetic compatibility and repealing Directive 89/336/EEC
2006/95/EC - Directive 2006/95/EC of the European Parliament and of the Council of 12 December 2006 on the harmonisation of the laws of Member States relating to electrical equipment designed for use within certain voltage limits (codified version)
73/23/EEC - Electrical equipment designed for use within certain voltage limits
89/336/EEC - Electromagnetic compatibility (EMC)
Ref Project
SIST EN 60439-1:1995 - Low-voltage switchgear and controlgear assemblies -- Part 1: Type-tested and partially type-tested assemblies

Relations

Amended By
EN 60439-1:1994/A1:1995 - Low-voltage switchgear and controlgear assemblies - Part 1: Type-tested and partially type-tested assemblies
Effective Date
29-Jan-2023
Amended By
EN 60439-1:1994/A11:1996 - Low-voltage switchgear and controlgear assemblies - Part 1: Type-tested and partially type-tested assemblies
Effective Date
29-Jan-2023
Replaced By
EN 60439-1:1999 - Low-voltage switchgear and controlgear assemblies - Part 1: Type-tested and partially type-tested assemblies
Effective Date
29-Jan-2023
Amended By
EN 60439-1:1994/A2:1997 - Low-voltage switchgear and controlgear assemblies - Part 1: Type-tested and partially type-tested assemblies
Effective Date
29-Jan-2023

Buy Standard

EN 60439-1:1995EN 60439-1:1995
PreviousNext
Standard
EN 60439-1:1995
English language
117 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60439-1:1995
01-december-1995
Low-voltage switchgear and controlgear assemblies - Part 1: Type-tested and
partially type-tested assemblies (IEC 439-1:1992 + corrigendum Dec. 1993)
Low-voltage switchgear and controlgear assemblies -- Part 1: Type-tested and partially
type-tested assemblies
Niederspannung-Schaltgerätekombinationen -- Teil 1: Typgeprüfte und partiell
typgeprüfte Kombinationen
Ensembles d'appareillage à basse tension -- Partie 1: Ensembles de série et ensembles
dérivés de série
Ta slovenski standard je istoveten z: EN 60439-1:1994
ICS:
29.130.20 Nizkonapetostne stikalne in Low voltage switchgear and
krmilne naprave controlgear
SIST EN 60439-1:1995 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 60439-1:1995

---------------------- Page: 2 ----------------------

SIST EN 60439-1:1995

---------------------- Page: 3 ----------------------

SIST EN 60439-1:1995

---------------------- Page: 4 ----------------------

SIST EN 60439-1:1995

---------------------- Page: 5 ----------------------

SIST EN 60439-1:1995

---------------------- Page: 6 ----------------------

SIST EN 60439-1:1995

---------------------- Page: 7 ----------------------

SIST EN 60439-1:1995

---------------------- Page: 8 ----------------------

SIST EN 60439-1:1995

---------------------- Page: 9 ----------------------

SIST EN 60439-1:1995

---------------------- Page: 10 ----------------------

SIST EN 60439-1:1995

---------------------- Page: 11 ----------------------

SIST EN 60439-1:1995

---------------------- Page: 12 ----------------------

SIST EN 60439-1:1995

---------------------- Page: 13 ----------------------

SIST EN 60439-1:1995

---------------------- Page: 14 ----------------------

SIST EN 60439-1:1995

---------------------- Page: 15 ----------------------

SIST EN 60439-1:1995

---------------------- Page: 16 ----------------------

SIST EN 60439-1:1995

---------------------- Page: 17 ----------------------

SIST EN 60439-1:1995

---------------------- Page: 18 ----------------------

SIST EN 60439-1:1995

---------------------- Page: 19 ----------------------

SIST EN 60439-1:1995

---------------------- Page: 20 ----------------------

SIST EN 60439-1:1995

---------------------- Page: 21 ----------------------

SIST EN 60439-1:1995

---------------------- Page: 22 ----------------------

SIST EN 60439-1:1995

---------------------- Page: 23 ----------------------

SIST EN 60439-1:1995

---------------------- Page: 24 ----------------------

SIST EN 60439-1:1995

---------------------- Page: 25 ----------------------

SIST EN 60439-1:1995

---------------------- Page: 26 ----------------------

SIST EN 60439-1:1995

---------------------- Page: 27 ----------------------

SIST EN 60439-1:1995

---------------------- Page: 28 ----------------------

SIST EN 60439-1:1995

---------------------- Page: 29 ----------------------

SIST EN 60439-1:1995

---------------------- Page: 30 ----------------------

SIST EN 60439-1:1995

---------------------- Page: 31 ----------------------

SIST EN 60439-1:1995

---------------------- Page: 32 ----------------------

SIST EN 60439-1:1995

---------------------- Page: 33 ----------------------

SIST EN 60439-1:1995

---------------------- Page: 34 ----------------------

SIST EN 60439-1:1995

---------------------- Page: 35 ----------------------

SIST EN 60439-1:1995

---------------------- Page: 36 ----------------------

SIST EN 60439-1:1995

---------------------- Page: 37 ----------------------

SIST EN 60439-1:1995

---------------------- Page: 38 ----------------------

SIST EN 60439-1:1995

---------------------- Page: 39 ----------------------

SIST EN 60439-1:1995

---------------------- Page: 40 ----------------------

SIST EN 60439-1:1995

---------------------- Page: 41 ----------------------

SIST EN 60439-1:1995

---------------------- Page: 42 ----------------------

SIST EN 60439-1:1995

---------------------- Page: 43 ----------------------

SIST EN 60439-1:1995

---------------------- Page: 44 ----------------------

SIST EN 60439-1:1995

---------------------- Page: 45 ----------------------

SIST EN 60439-1:1995

---------------------- Page: 46 ----------------------

SIST EN 60439-1:1995

---------------------- Page: 47 ----------------------

SIST EN 60439-1:1995

---------------------- Page: 48 ----------------------

SIST EN 60439-1:1995

---------------------- Page: 49 ----------------------

SIST EN 60439-1:1995

---------------------- Page: 50 ----------------------

SIST EN 60439-1:1995

---------------------- Page: 51 ----------------------

SIST EN 60439-1:1995

---------------------- Page: 52 ----------------------

SIST EN 60439-1:1995

---------------------- Page: 53 ----------------------

SIST EN 60439-1:1995

---------------------- Page: 54 ----------------------

SIST EN 60439-1:1995

---------------------- Page: 55 -------------
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CLC
EN IEC 60947-6-2:2023/AC:2023-07(Corrigendum)
Low-voltage switchgear and controlgear - Part 6-2: Multiple function equipment - Control and protective switching devices (or equipment) (CPS)
SIST EN IEC 60947-6-2:2023/AC:2023
  • Corrigendum
    3 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60947-6-1:2023(Main)
Low-voltage switchgear and controlgear - Part 6-1: Multiple function equipment - Transfer switching equipment
SIST EN IEC 60947-6-1:2023

This part of EN 60947applies to transfer switching equipment (TSE) to be used in power systems with interruption of the supply to the load during transfer, the rated voltage of which does not exceed 1 000 V a.c. or 1 500 V d.c.

  • Standard
    66 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60947-8:2023(Main)
Low-voltage switchgear and controlgear - Part 8: Control units for built-in thermal protection (PTC) for rotating electrical machines
SIST EN IEC 60947-8:2023

This part of IEC 60947 series specifies requirements for control units, which control a switching device in response to the PTC thermistors incorporated in rotating electrical machines and the industrial application. It specifies requirements for that type of system comprising a positive temperature coefficient (PTC) thermistor having particular characteristics, and its associated control unit. This document includes: - the characteristics, construction, performance and tests of the control unit; and - its association with a PTC thermistor designated "Mark A". This document does not cover: - the incorporation of thermal protections into rotating machines and their maximum winding temperature. See IEC 60034-11; - use of the product within explosive atmospheres (see IEC 60079 (all parts)); - software and firmware requirements; NOTE 1 Guidance on embedded software is given in IEC TR 63201. - cyber security aspects (see IEC TS 63208). NOTE 2 It is not possible to specify all the requirements for the operating characteristics of a control unit, as they are dependent on some aspects of the PTC thermistors. Some aspects of the requirements of the thermal protector system can only be specified when account is taken of the characteristics of the rotating machine to be protected and the method of installation of the PTC thermistor within the machine.

  • Standard
    45 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60947-4-2:2023(Main)
Low-voltage switchgear and controlgear - Part 4-2: Contactors and motor-starters - Semiconductor motor controllers, starters and soft-starters
SIST EN IEC 60947-4-2:2023

IEC 60947-4-2:2020 applies to semiconductor motor controllers, starters and soft-starters which can include a series mechanical switching device, intended to be connected to circuits the rated voltage of which does not exceed 1 000 V AC. This fourth edition cancels and replaces the third edition published in 2011. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: - scope exclusions; - editorial correction of notes and hanging paragraphs; - reference to IEC 62683-1; - safety aspects related to: - general aspects; - limited energy circuits; - electronic circuits; - mention of dedicated wiring accessories; - power consumption measurement; - alignment to IEC 60947-1:2020.

  • Standard
    117 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60947-6-2:2023(Main)
Low-voltage switchgear and controlgear - Part 6-2: Multiple function equipment - Control and protective switching devices (or equipment) (CPS)
SIST EN IEC 60947-6-2:2023

Applies to control and protective switching devices (or equipment) (CPS), the main contacts of which are intended to be connected to circuits of rated voltage not exceeding 1 000 V a.c. or 1 500 V d.c. CPSs are intended to provide both protective and control functions for circuits and are operated otherwise than by hand. They may also fulfil additional functions, such as isolation.

  • Standard
    116 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60947-1:2021/AC:2023-01(Corrigendum)
Low-voltage switchgear and controlgear - Part 1: General rules
SIST EN IEC 60947-1:2021/AC:2023
  • Corrigendum
    4 pages
    English and French language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60947-5-2:2020/A11:2022(Amendment)
Low-voltage switchgear and controlgear - Part 5-2: Control circuit devices and switching elements - Proximity switches
SIST EN IEC 60947-5-2:2020/A11:2022

EN-IEC 60947-5-2 applies to inductive and capacitive proximity switches that sense the presence of metallic and/or non-metallic objects, ultrasonic proximity switches that sense the presence of sound reflecting objects, photoelectric proximity switches that sense the presence of objects and non-mechanical magnetic proximity switches that sense the presence of objects with a magnetic field. Products covered by the scope of this document are not subjected to defined behaviours under fault conditions. Proximity switches with defined behaviour are covered by IEC 60947-5-3 and have to fulfil additional requirements. These proximity switches are self-contained, have semiconductor switching element(s) and are intended to be connected to circuits, the rated voltage of which does not exceed 250 V 50 Hz/60 Hz AC RMS or 300 V DC. Examples of typical applications for in-scope products: - factory automation and machinery industry; - logistic and packaging industry; - conveyor belts, lifts; - process industry; - power plants. Special applications (e.g. corrosive atmosphere) can cause additional requirements. This document is not intended to cover proximity switches with analogue outputs. The object of this document is to state for proximity switches: - definitions; - classification; - characteristics; - product information; - normal service, mounting and transport conditions; - constructional and performance requirements; - tests to verify rated characteristics. Products covered by the scope of this document are expected to be selected, installed, and maintained by skilled personnel only.

  • Amendment
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 61439-1:2021/AC:2022-01(Corrigendum)
Low-voltage switchgear and controlgear assemblies - Part 1: General rules
SIST EN IEC 61439-1:2021/AC:2022

IEC Corrected version

  • Corrigendum
    3 pages
    English and French language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60947-3:2021/AC:2021-11(Corrigendum)
Low-voltage switchgear and controlgear - Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units
SIST EN IEC 60947-3:2021/AC:2022

IEC corrected version

  • Corrigendum
    3 pages
    English and French language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 61439-1:2021(Main)
Low-voltage switchgear and controlgear assemblies - Part 1: General rules
SIST EN IEC 61439-1:2021

IEC 61439-1:2020 is available as IEC 61439-1:2020 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 61439-1:2020 lays down the general definitions and service conditions, construction requirements, technical characteristics and verification requirements for low-voltage switchgear and controlgear assemblies. NOTE Throughout this document, the term assembly(s) (see 3.1.1) is used for a low-voltage switchgear and controlgear assembly(s). For the purpose of determining assembly conformity, the requirements of the relevant part of the IEC 61439 series, Part 2 onwards, apply together with the cited requirements of this document. For assemblies not covered by Part 3 onward, Part 2 applies. This third edition cancels and replaces the second edition published in 2011. It constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) clarification that power electric converter systems, switch mode power supplies, uninterruptable power supplies and adjustable speed power drive systems are tested to their particular products standard, but when they are incorporated in assemblies the incorporation is in accordance with the IEC 61439 series of standards; b) introduction of a group rated current for circuits within a loaded assembly and the refocusing of temperature-rise verification on this new characteristic; c) addition of requirements in respect of DC; d) introduction of the concept of class I and class II assemblies regarding protection against electric shock.

  • Standard
    164 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    147 pages
    English language
    sale 10% off
    e-Library read for
    1 day