EN 60286-6:2004

Packaging of components for automatic handling - Part 6: Bulk case packaging for surface mounting components

Is applicable to bulk case packaging capable of containing surface mounting components. The bulk case is designed for transport and storage of components and the supply of components directly or by an appropriate feeder to the placement machine. The bulk case is attached to the automatic handling machine by means of a coupling interface

Gurtung und Magazinierung von Bauelementen für automatische Verarbeitung - Teil 6: Schüttgutbehälter für oberflächenmontierbare Bauelemente

Emballage des composants pour opérations automatisées - Partie 6: Emballage en vrac des composants pour montage en surface

Est applicable à l'emballage en vrac capable de contenir des composants pour montage en surface. L'emballage en vrac est conçu pour le transport et le stockage des composants, et pour fournir des composants directement ou par un chargeur approprié à la machine de placement. L'emballage en vrac est fixé à la machinerie pour opérations automatisées au moyen d'une interface de couplage.

Packaging of components for automatic handling - Part 6: Bulk case packaging for surface mounting components (IEC 60286-6:2004)

General Information

• Status: Published
• Publication Date: 14-Mar-2004
• Withdrawal Date: 28-Feb-2007
• ICS: 31.020 - Electronic components in general
• Technical Committee: CLC/SR 40 - Capacitors and resistors for electronic equipment
• Drafting Committee: IEC/TC 40 - IEC_TC_40
• Parallel Committee: IEC/TC 40 - IEC_TC_40
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 15-Mar-2004
• Completion Date: 15-Mar-2004
• Ref Project: SIST EN 60286-6:2004 - Packaging of components for automatic handling -- Part 6: Bulk case packaging for surface mounting components

Relations

• Replaces: EN 60286-6:1998 - Packaging of components for automatic handling - Part 6: Bulk case packaging for surface mounting components
• Effective Date: 28-Jan-2023

Standards Content (Sample)

SLOVENSKI SIST EN 60286-6:2004

STANDARD
julij 2004
Packaging of components for automatic handling - Part 6: Bulk case packaging for
surface mounting components (IEC 60286-6:2004)
ICS 31.020; 55.160 Referenčna številka
SIST EN 60286-6:2004(en)
©  Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD EN 60286-6
NORME EUROPÉENNE
EUROPÄISCHE NORM March 2004

ICS 31.020 Supersedes EN 60286-6:1998


English version


Packaging of components for automatic handling
Part 6: Bulk case packaging for surface mounting components
(IEC 60286-6:2004)


Emballage des composants  Gurtung und Magazinierung von
pour opérations automatisées Bauelementen für automatische
Partie 6: Emballage en vrac Verarbeitung
des composants pour montage Teil 6: Schüttgutbehälter für
en surface oberflächenmontierbare Bauelemente
(CEI 60286-6:2004) (IEC 60286-6:2004)






This European Standard was approved by CENELEC on 2004-03-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden,
Switzerland and United Kingdom.


CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels


© 2004 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.

Ref. No. EN 60286-6:2004 E

---------------------- Page: 2 ----------------------

EN 60286-6:2004 - 2 -
Foreword

The text of document 40/1365/FDIS, future edition 2 of IEC 60286-6, prepared by IEC TC 40, Capacitors
and resistors for electronic equipment, was submitted to the IEC-CENELEC parallel vote and was
approved by CENELEC as EN 60286-6 on 2004-03-01.

This European Standard supersedes EN 60286-6:1998.

The following dates were fixed:

– latest date by which the EN has to be implemented
 at national level by publication of an identical
 national standard or by endorsement (dop) 2004-12-01

– latest date by which the national standards conflicting
 with the EN have to be withdrawn (dow) 2007-03-01

The International Electrotechnical Commission (IEC) and CENELEC draw attention to the fact that it is
claimed that compliance with this document may involve the use of a patent concerning the structure
of the bulk case given in 4.1.
The IEC and CENELEC take no position concerning the evidence, validity and scope of this patent
right.
The holder of this patent right has assured the IEC that he is willing to negotiate licences under
reasonable and non-discriminatory terms and conditions with applicants throughout the world. In this
respect, the statement of the holder of this patent right is registered with the IEC. Information may be
obtained from:
Murata Manufacturing Co., Ltd.
26-10, 2-Chome Tenjin
Nagaokakyo-Shi
Kyoto 617-8555
JAPAN

Fax: [phone]
E-Mail: [e-mail]
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights other than those identified above. IEC and CENELEC shall not be held responsible for
identifying any or all such patent rights.

Annex ZA has been added by CENELEC.
__________

Endorsement notice

The text of the International Standard IEC 60286-6:2004 was approved by CENELEC as a European
Standard without any modification.
__________

---------------------- Page: 3 ----------------------

- 3 - EN 60286-6:2004
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
NOTE When an international publication ha
...