prEN IEC 61820-2:2023
(Main)Electrical installations for aeronautical ground lighting at aerodromes - Part 1-2: Fundamental principles - Particular requirements for series circuits
Electrical installations for aeronautical ground lighting at aerodromes - Part 1-2: Fundamental principles - Particular requirements for series circuits
Elektrische Anlagen für Beleuchtung und Befeuerung von Flugplätzen – Teil 2: Anforderungen an die Serienkreise
Installations électriques pour le balisage aéronautique au sol dans les aérodromes - Partie 1-2: Principes fondamentaux - Exigences particulières relatives aux circuits série
Električne inštalacije za razsvetljavo in radijske javljalnike na letališčih - 1-2. del: Posebne zahteve za zaporedna vezja
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN IEC 61820-2:2023
01-julij-2023
Električne inštalacije za razsvetljavo in radijske javljalnike na letališčih - 1-2. del:
Posebne zahteve za zaporedna vezja
Electrical installations for lighting and beaconing of aerodromes - Part 1-2: Particular
requirements for series circuits
Installations électriques pour l’éclairage et le balisage des aérodromes
Partie 1-2:
Exigences particulières relatives aux circuits série
Ta slovenski standard je istoveten z: prEN IEC 61820-2:2023
ICS:
29.140.50 Instalacijski sistemi za Lighting installation systems
razsvetljavo
49.100 Oprema za servis in Ground service and
vzdrževanje na tleh maintenance equipment
93.120 Gradnja letališč Construction of airports
oSIST prEN IEC 61820-2:2023 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN IEC 61820-2:2023
---------------------- Page: 2 ----------------------
oSIST prEN IEC 61820-2:2023
97/252/CDV
COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 61820-2 ED1
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2023-04-21 2023-07-14
SUPERSEDES DOCUMENTS:
97/219/CD, 97/235A/CC
IEC TC 97 : ELECTRICAL INSTALLATIONS FOR LIGHTING AND BEACONING OF AERODROMES
SECRETARIAT: SECRETARY:
Spain Mrs Carmen Martín Marino
OF INTEREST TO THE FOLLOWING COMMITTEES: PROPOSED HORIZONTAL STANDARD:
Other TC/SCs are requested to indicate their interest, if
any, in this CDV to the secretary.
FUNCTIONS CONCERNED:
EMC ENVIRONMENT QUALITY ASSURANCE SAFETY
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of
CENELEC, is drawn to the fact that this Committee Draft
for Vote (CDV) is submitted for parallel voting.
The CENELEC members are invited to vote through the
CENELEC online voting system.
This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of
• any relevant patent rights of which they are aware and to provide supporting documentation ,
• any relevant “in some countries” clauses to be included should this proposal proceed. Recipients are
reminded that the enquiry stage is the final stage for submitting "in some countries" clauses. See
AC/22/2007.
TITLE:
Electrical installations for lighting and beaconing of aerodromes
Part 1-2: Particular requirements for series circuits
PROPOSED STABILITY DATE: 2028
NOTE FROM TC/SC OFFICERS:
According to the decision made at the meeting held in Barcelona on 2019-10-04 (see 97/212/RM item
7), the new number of this project shall be IEC 61820-1-2.
Copyright © 2023 International Electrotechnical Commission, IEC. All rights reserved. It is permitted to
download this electronic file, to make a copy and to print out the content for the sole purpose of preparing National
Committee positions. You may not copy or "mirror" the file or printed version of the document, or any part of it,
for any other purpose without permission in writing from IEC.
---------------------- Page: 3 ----------------------
oSIST prEN IEC 61820-2:2023
IEC CDV 61820-2 © IEC 2023 2 97/252/CDV
1 CONTENTS
2
3 FOREWORD. 4
4 INTRODUCTION . 6
5 1 Scope . 7
6 2 Normative references . 7
7 3 Terms and definitions . 7
8 3.3 8
9 4 Requirements . 9
10 4.1 General . 9
11 A series circuit shall be designed as one continuous primary loop connected to the
12 output of the series circuit power supply. . 9
13 4.2 Series Circuit Power Supply . 9
14 Series circuit power supplies shall be compliant with basic requirements contained
15 within this standard. . 9
16 4.3 Isolation of Field Circuit .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.