Information technology equipment - Routine electrical safety testing in production

This European Standard defines routine test procedures for use during or after manufacturing of complete equipments, sub-assemblies or components, certified or declared as complying with EN 60950 or EN 60950-1 and powered by an a.c. or d.c. mains supply. The application of the tests detailed in this European Standard is design dependent and needs to be defined by the manufacturer.

Einrichtungen der Informationstechnik - Stückprüfungen für die Fertigung in Bezug auf elektrische Sicherheit

Diese Europäische Norm legt STÜCKPRÜFUNGEN für die Anwendung während oder nach der Fertigung vollständiger Einrichtungen, Baugruppen oder Komponenten fest, die nach EN 60950 oder EN 60950-1 zertifiziert werden oder deren Übereinstimmung bescheinigt wird und aus einer Wechsel- oder Gleichstromversorgungseinheit gespeist werden. Die Anwendung der in dieser Europäischen Norm festgelegten Prüfverfahren ist konstruktionsabhängig und muss vom Hersteller festgelegt werden.

Matériel de traitement de l'information - Essais individuels de série, en production, pour la vérification de la sécurité électrique

Cette Norme Européenne définit les procédures d’essais individuels à réaliser pendant ou après la fabrication d’équipements complets, de sous-ensembles ou de composants, certifiés ou déclarés conformes avec la EN 60950 ou EN 60950 1, et alimentés en courant alternatif ou continu. La mise en œuvre des essais décrits dans cette Norme Européenne est dépendante de la conception des équipements, et doit être définie par le fabricant.

Oprema za informacijsko tehnologijo – Medproizvodno rutinsko preskušanje električne varnosti

General Information

Status
Withdrawn
Publication Date
09-Nov-2006
Current Stage
6060 - Document made available
Due Date
10-Nov-2006
Completion Date
10-Nov-2006

RELATIONS

Buy Standard

Standard
EN 50116:2007
English language
6 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day

Standards Content (sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.NXãDQMHEinrichtungen der Informationstechnik - Stückprüfungen für die Fertigung in Bezug auf elektrische SicherheitMatériel de traitement de l'information - Essais individuels de série, en production, pour la vérification de la sécurité électriqueInformation technology equipment - Routine electrical safety testing in production35.020Informacijska tehnika in tehnologija na splošnoInformation technology (IT) in general19.080SUHVNXãDQMHElectrical and electronic testingICS:Ta slovenski standard je istoveten z:EN 50116:2006SIST EN 50116:2007en,fr,de01-september-2007SIST EN 50116:2007SLOVENSKI

STANDARDSIST EN 50116:19991DGRPHãþD
SIST EN 50116:2007
EUROPEAN STANDARD EN 50116 NORME EUROPÉENNE
EUROPÄISCHE NORM November 2006

CENELEC European Committee for Electrotechnical Standardization Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2006 CENELEC -

All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.

Ref. No. EN 50116:2006 E
ICS 35.020; 35.260.10 Supersedes EN 50116:1996
English version
Information technology equipment -
Routine electrical safety testing in production
Matériel de traitement de l'information -

Essais individuels de série, en production, pour la vérification de la sécurité électrique

Einrichtungen der Informationstechnik - Stückprüfungen für die Fertigung in Bezug auf elektrische Sicherheit

This European Standard was approved by CENELEC on 2006-10-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.

SIST EN 50116:2007

EN 50116:2006 - 2 - Foreword This European Standard was prepared by the Technical Committee CENELEC TC 108, Safety of electronic equipment within the fields of audio/video, information technology and communication technology. The text of the draft was submitted to the Unique Acceptance Procedure and was approved by CENELEC as EN 50116 on 2006-10-01. This European Standard supersedes EN 50116:1996. A list of the significant changes is given in Annex A. The following dates were fixed: – latest date by which the EN has to be implemented

at national level by publication of an identical
national standard or by endorsement
(dop)
2007-10-01 – latest date by which the national standards conflicting
with the EN have to be withdrawn
(dow)

2009-10-01 This European Standard applies to equipment that complies with EN 60950 or EN 60950-1. Most of the tests specified in those standards are TYPE TESTS. For ROUTINE TESTS, to be carried out during or after manufacture, TYPE TESTS may not be suitable. Nevertheless it is recognized that some tests are necessary in order to guarantee an acceptable level of safety.

This European Standard defines ROUTINE TESTS to measure the resistance of the earthing path and to check the insulation between the PRIMARY CIRCUIT and accessible conductive parts. In addition, this European Standard defines the documentation to be maintained by the manufacturer in respect of these tests.

This standard is complementary to the product safety standards (EN 60950 or EN 60950-1) and is to be considered only as a tool for voluntary application by manufacturers. This European Standard can be used in association with Permanent Document CIG 021, Factory inspection procedures - Harmonised requirements, of the European Electrical Products Certification Association. Permanent Document CIG 021 can be obtained from signatory bodies (certification bodies). In this European Standard, the following print types are used: - normative text: roman type; - test specifications: italic type; - terms which are defined in EN 60950 or EN 60950-1: SMALL CAPITALS. __________ SIST EN 50116:2007

- 3 - EN 50116:2006

Table of contents 1 Scope.............................................................................................................................................4 2 Normative references...................................................................................................................4 3 Definitions.....................................................................................................................................4 4 Conformance................................................................................................................................4 5 Routine tests...............................................

...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.