Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 2-71: Cables for general applications - Flat tinsel cables (cords) with thermoplastic PVC insulation

This European Standard applies to thermoplastic (PVC) insulated flexible flat tinsel flexible cables. The cables are of rated voltage U0/U 300/300 V. The cables are intended for the connection of small appliances to the fixed supply. The maximum conductor operating temperature for the cable in this standard is 40 °C. NOTE HD 516 contains extensive guidance on the safe use of cables in this standard. This EN 50525-2-71 should be read in conjunction with EN 50525-1, which specifies general requirements.

Kabel und Leitungen - Starkstromleitungen mit Nennspannungen bis 450/750 V (U0/U) - Teil 2-71: Starkstromleitungen für allgemeine Anwendungen - Lahnlitzen-Leitungen mit thermoplastischer PVC-Isolierung

Câbles électriques - Câbles d’énergie basse tension de tension assignée au plus égale à 450/750 V (U0/U) - Partie 2-71: Câbles pour applications générales - Câbles plats pour cordons à fil rosette, isolés en PVC thermoplastique

Električni kabli - Nizkonapetostni energetski kabli z nazivno napetostjo do vključno 450/750 V (U0/U) - 2-71. del: Kabli za splošno uporabo - Ploščate opletene niti s termoplastično PVC izolacijo

Ta evropski standard velja za ploščate zvijave opletene kable s termoplastično (PVC) izolacijo. Ti kabli imajo nazivno napetost U0/U do vključno 300/300 V. Povezujejo male gospodinjske aparate s fiksnim napajanjem. Maksimalna delovna temperatura pretvornika za kable iz tega standarda je
40 °C.

General Information

Status
Published
Publication Date
05-May-2011
Withdrawal Date
16-Jan-2014
Technical Committee
Drafting Committee
Current Stage
9093 - Decision to confirm - Review Enquiry
Completion Date
25-Sep-2019

Relations

Buy Standard

Standard
EN 50525-2-71:2011
English language
9 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 50525-2-71:2011
01-september-2011
(OHNWULþQLNDEOL1L]NRQDSHWRVWQLHQHUJHWVNLNDEOL]QD]LYQRQDSHWRVWMRGR
YNOMXþQR9 88 GHO.DEOL]DVSORãQRXSRUDER3ORãþDWHRSOHWHQH
QLWLVWHUPRSODVWLþQR39&L]RODFLMR
Electric cables - Low voltage energy cables of rated voltages up to and including 450/750
V (U0/U) - Part 2-71: Cables for general applications - Flat tinsel cables (cords) with
thermoplastic PVC insulation
Kabel und Leitungen - Starkstromleitungen mit Nennspannungen bis 450/750 V (U0/U) -
Teil 2-71: Starkstromleitungen für allgemeine Anwendungen - Lahnlitzen-Leitungen mit
thermoplastischer PVCIsolierung
Câbles électriques - Câbles d’énergie basse tension de tension assignée au plus égale à
450/750 V (U0/U) - Partie 2-71: Câbles pour applications générales - Câbles plats pour
cordons à fil rosette, isolés en PVC thermoplastique
Ta slovenski standard je istoveten z: EN 50525-2-71:2011
ICS:
29.060.20 Kabli Cables
SIST EN 50525-2-71:2011 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 50525-2-71:2011

---------------------- Page: 2 ----------------------

SIST EN 50525-2-71:2011

EUROPEAN STANDARD
EN 50525-2-71

NORME EUROPÉENNE
May 2011
EUROPÄISCHE NORM

ICS 29.060.20 Supersedes HD 21.5 S3:1994 (partially) + A1:1999 (partially) + A2:2001 (partially)


English version


Electric cables -
Low voltage energy cables of rated voltages up to and including 450/750 V
(U /U) -
0
Part 2-71: Cables for general applications -
Flat tinsel cables (cords) with thermoplastic PVC insulation



Câbles électriques -  Kabel und Leitungen -
Câbles d’énergie basse tension de tension Starkstromleitungen mit Nennspannungen
assignée au plus égale à 450/750 V bis 450/750 V (U /U) -
0
(U /U) -
Teil 2-71: Starkstromleitungen für
0
Partie 2-71: Câbles pour applications allgemeine Anwendungen -
générales - Lahnlitzen-Leitungen mit
Câbles plats pour cordons à fil rosette, thermoplastischer PVC-Isolierung
isolés en PVC thermoplastique


This European Standard was approved by CENELEC on 2011-01-17. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels


© 2011 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 50525-2-71:2011 E

---------------------- Page: 3 ----------------------

SIST EN 50525-2-71:2011
EN 50525-2-71:2011 - 2 -
Foreword
This European Standard was prepared by the Technical Committee CENELEC TC 20, Electric
cables.

The text of the draft was submitted to the formal vote and was approved by CENELEC as
EN 50525-2-71 on 2011-01-17.

This document, which is one of a multipart series, supersedes Clause 2 of HD 21.5 S3:1994 +
A1:1999 + A2:2001.

Attention is drawn to the possibility that some of the elements of this document may be the
subject of patent rights. CEN and CENELEC shall not be held responsible for identifying any
or all such patent rights.

The following dates were fixed:

– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2012-01-17

– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2014-01-17
_____________

---------------------- Page: 4 ----------------------

SIST EN 50525-2-71:2011
- 3 - EN 50525-2-71:2011
Contents
Page
1 Scope . 4
2 Normative references .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.