EN 61228:2008
(Main)Fluorescent ultraviolet lamps used for tanning - Measurement and specification method
Fluorescent ultraviolet lamps used for tanning - Measurement and specification method
This International Standard describes the method of measuring, evaluating and specifying the characteristics of fluorescent ultraviolet lamps that are used in appliances for tanning purposes. It includes specific requirements regarding the marking of such lamps. This second edition cancels and replaces the first edition published in 1993 and its Amendment 1 (1996). In this second edition, an equivalency code for the lamps is introduced. This equivalency code characterises the spectral energy distribution and is to be applied when replacing lamps in tanning equipment.
UV-Leuchtstofflampen für Bräunungszwecke - Verfahren zur Messung und Beschreibung
Lampes fluorescentes à ultraviolet utilisées pour le bronzage - Méthode de mesure et de spécification
La présente Norme internationale décrit la méthode pour mesurer, évaluer et spécifier les caractéristiques des lampes fluorescentes à ultraviolet utilisées dans les appareils de bronzage. Elle inclut des spécifications particulières concernant le marquage de telles lampes. Cette deuxième édition annule et remplace la première édition parue en 1993 et son Amendement 1 (1996). Dans cette deuxième édition, un code d'équivalence pour les lampes est introduit. Ce code d'équivalence caractérise la distribution d'énergie spectrale et doit être appliqué lors du remplacement de lampes dans les équipements de bronzage.
Fluorescenčne ultravijolične sijalke za umetno sončenje - Merjenje in specifikacijska metoda (IEC 61228:2008)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-maj-2008
1DGRPHãþD
SIST EN 61228:2001
SIST EN 61228:2001/A1:2001
)OXRUHVFHQþQHXOWUDYLMROLþQHVLMDONH]DXPHWQRVRQþHQMH0HUMHQMHLQ
VSHFLILNDFLMVNDPHWRGD ,(&
Fluorescent ultraviolet lamps used for tanning - Measurement and specification method
UV-Leuchtstofflampen für Bräunungszwecke - Verfahren zur Messung und Beschreibung
Lampes fluorescentes à ultraviolet utilisées pour le bronzage - Méthode de mesure et de
spécification
Ta slovenski standard je istoveten z: EN 61228:2008
ICS:
17.240 Merjenje sevanja Radiation measurements
29.140.30 )OXRUHVFHQþQHVLMDONH6LMDONH Fluorescent lamps.
Discharge lamps
97.170 Oprema za nego telesa Body care equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN 61228
NORME EUROPÉENNE
March 2008
EUROPÄISCHE NORM
ICS 17.240; 29.140.01; 97.170 Supersedes EN 61228:1994 + A1:1996
English version
Fluorescent ultraviolet lamps used for tanning -
Measurement and specification method
(IEC 61228:2008)
Lampes fluorescentes à ultraviolet UV-Leuchtstofflampen
utilisées pour le bronzage - für Bräunungszwecke -
Méthode de mesure et de spécification Verfahren zur Messung und Beschreibung
(CEI 61228:2008) (IEC 61228:2008)
This European Standard was approved by CENELEC on 2008-02-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2008 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61228:2008 E
Foreword
The text of document 34A/1242/FDIS, future edition 2 of IEC 61228, prepared by SC 34A, Lamps, of
IEC TC 34, Lamps and related equipment, was submitted to the IEC-CENELEC parallel vote and was
approved by CENELEC as EN 61228 on 2008-02-01.
This European Standard supersedes EN 61228:1994 + A1:1996.
In EN 61128:2008, an equivalency code for the lamps is introduced. This equivalency code characterises
the spectral energy distribution and is to be applied when replacing lamps in tanning equipment.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2008-11-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2011-02-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 61228:2008 was approved by CENELEC as a European
Standard without any modification.
__________
- 3 - EN 61228:2008
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year
IEC 60050-845 1987 International Electrotechnical Vocabulary - -
(IEV) -
Chapter 845: Lighting
1) 2)
IEC 60081 - Double-capped fluorescent lamps - EN 60081 1998
Performance specifications
1) 2)
IEC 60335-2-27 - Household and similar electrical appliances - EN 60335-2-27 2003
Safety -
Part 2-27: Particular requirements for
appliances for skin exposure to ultraviolet
and infrared radiation
1) 2)
IEC 60901 - Single-capped fluorescent lamps - EN 60901 1996
Performance specifications
1)
IEC 62471 - Photobiological safety of lamps and lamp - -
systems
CIE 63 1984 The spectroradiometric measurement of light - -
sources
1)
Undated reference.
2)
Valid edition at date of issue.
IEC 61228
Edition 2.0 2008-01
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Fluorescent ultraviolet lamps used for tanning – Measurement and specification
method
Lampes fluorescentes à ultraviolet utilisées pour le bronzage – Méthode de
mesure et de spécification
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
M
CODE PRIX
ICS 17.240; 29.140.01; 97.170 ISBN 2-8318-9523-5
– 2 – 61228 © IEC:2008
CONTENTS
FOREWORD.3
1 Scope.5
2 Normative references .5
3 Terms and definitions .5
4 General test conditions.7
4.1 Ageing.7
4.2 Operating position .7
4.3 Ambient temperature .7
4.4 Test voltage .7
4.5 Ballast.7
5 Test requirements .7
5.1 General .7
5.2 Spectroradiometric measuring system .7
6 Measurement and evaluation procedure .8
6.1 Measurement .8
6.2 Calculation of the total effective UV irradiance .8
6.3 Correction factors.8
7 Lamp specification.9
8 Lamp marking.9
Annex A (normative) Determination of the optimum UV irradiance of fluorescent UV
lamps.11
Annex B (normative) Ultraviolet action spectra.12
Figure B.1 – UV action spectra for erythema and NMSC .12
Table B.1 – Weighting factors S(λ) for the erythema and the NMSC action spectrum .13
61228 © IEC:2008 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
FLUORESCENT ULTRAVIOLET LAMPS USED FOR TANNING –
MEASUREMENT AND SPECIFICATION METHOD
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with an IEC Publication.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 61228 has been prepared by subcommittee 34A: Lamps, of IEC
technical committee 34: Lamps and related equipment.
This second edition cancels and replaces the first edition published in 1993 and its
Amendment 1 (1996). It constitutes a technical revision.
In this second edition, an equivalency code for the lamps in introduced. This equivalency code
characterises the spectral energy distribution and is to be applied when replacing lamps in
tanning equipment.
The text of this standard is based on the following documents:
FDIS Report on voting
34A/1242/FDIS 34A/1266/RVD
Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
– 4 – 61228 © IEC:2008
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
The committee has decided that the contents of this publication will remain unchanged until
the maintenance result date indicated on the IEC web site under "http://webstore.iec.ch" in
the data related to the specific publication. At this date, the publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
61228 © IEC:2008 – 5 –
FLUORESCENT ULTRAVIOLET LAMPS USED FOR TANNING –
MEASUREMENT AND SPECIFICATION METHOD
1 Scope
This International Standard describes the method of measuring, evaluating and specifying the
characteristics of fluorescent ultraviolet lamps that are used in appliances for tanning
purposes. It includes specific requirements regarding the marking of such lamps.
These recommendations relate only to type testing.
2 Normative references
The following referenced documents are indispensable for the application of this document.
For dated references, only the edition cited applies. For undated references, the latest edition
of the referenced document (including any amendments) applies.
IEC 60050-845:1987, International Electrotechnical Vocabulary (IEV) – Chapter 845: Lighting
IEC 60081, Double-capped fluorescent lamps – Performance specifications
IEC 60901, Single-capped fluorescent lamps – Performance specifications
IEC 60335-2-27, Household and simil
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.