EN 50463-3:2017

Railway applications - Energy measurement on board trains - Part 3: Data handling

This European Standard covers the requirements applicable to the Data Handling System (DHS) of an Energy Measurement System (EMS). This document also includes the basic requirements for the Data Collecting System (DCS) on-ground, relating to the acquisition and storage and export of Compiled Energy Billing Data (CEBD). The Conformity Assessment arrangements for the DHS and the DCS are specified in this document. The settlement system is outside the scope of this standard, and the specification of the interface between DCS and settlement system is outside the scope of this standard.

Bahnanwendungen - Energiemessung auf Bahnfahrzeugen - Teil 3: Datenverarbeitung

Applications ferroviaires - Mesure d'énergie à bord des trains - Partie 3 : Traitement des données

La présente Norme européenne couvre les exigences applicables au système de traitement de données (DHS) d'un système de mesure d'énergie (EMS). Le présent document comprend également les exigences de base pour le système de collecte des données (DCS) au sol, relatives à l'acquisition, au stockage et à l'exportation des données de facturation d'énergie compilées (CEBD). Les dispositions d'évaluation de la conformité pour le DHS sont spécifiées dans le présent document. Le système de règlement et la spécification de l'interface entre le DCS et le système de règlement ne relèvent pas du domaine d'application de la présente norme.

Železniške naprave - Merjenje energije na vlaku - 3. del: Ravnanje s podatki

Ta osnutek evropskega standarda zajema zahteve za sistem ravnanja s podatki (DHS) sistema merjenja energije.
Ta dokument vključuje tudi osnovne zahteve za storitev zbiranja podatkov na tleh v zvezi s pridobivanjem, hranjenjem in z izvažanjem zbranih podatkov o obračunavanju energije.
V tem dokumentu so določeni načini ugotavljanja skladnosti sistema ravnanja s podatki in DCS-ja.
Poravnalni sistem ne spada na področje uporabe tega standarda, ravno tako pa na področje uporabe tega standarda ne spada specifikacija vmesnika med DCS-jem in poravnalnim sistemom.

General Information

• Status: Published
• Publication Date: 05-Oct-2017
• ICS: 45.060.10 - Tractive stock
• Technical Committee: CLC/TC 9X - Electrical and electronic applications for railways
• Drafting Committee: CLC/TC 9X/WG 11 - Energy measurement
• Current Stage: 9093 - Decision to confirm - Review Enquiry
• Completion Date: 20-Apr-2022
• Directive: 2008/57/EC - Directive 2008/57/EC of the European Parliament and of the Council of 17 June 2008 on the interoperability of the rail system within the Community (Recast)
• Directive: 2014/32/EU - Directive 2014/32/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of measuring instruments
• Directive: 2016/797/EU - Directive (EU) 2016/797 of the European Parliament and of the Council of 11 May 2016 on the interoperability of the rail system within the European Union (Text with EEA relevance)
• Mandate: M/453 - Standardisation mandate addressed to CEN, CENELEC and ETSI in the field of information and communication technologies to support the interoperability of co-operative for intelligent transport in the european community
• Mandate: M/483 - Mandate for programming and standardisation addressed to the European standardisation bodies under directive 2008/57/EC in the field of the interoperability of the rail system within the European Union
• Mandate: M/591 - Standardisation request to the European Committee for Standardisation and the European Committee for Electrotechnical Standardisation as regards railway products in support of Directive (EU) 2016/797
• Ref Project: SIST EN 50463-3:2018 - Railway applications - Energy measurement on board trains - Part 3: Data handling

Relations

• Replaces: EN 50463-3:2012 - Railway applications - Energy measurement on board trains - Part 3: Data handling
• Effective Date: 07-Jun-2022
• Amended By: EN 50463-3:2017/A1:2024 - Railway applications - Energy measurement on board trains - Part 3: Data handling
• Effective Date: 26-Apr-2022

Standards Content (Sample)

SLOVENSKI STANDARD
01-januar-2018
1DGRPHãþD
SIST EN 50463-3:2013
Železniške naprave - Merjenje energije na vlaku - 3. del: Ravnanje s podatki
Railway applications - Energy measurement on board trains - Part 3: Data handling
Bahnanwendungen - Energiemessung auf Bahnfahrzeugen - Teil 3: Daten-Behandlung
Applications ferroviaires - Mesure d'énergie à bord des trains - Partie 3 : Traitement des
données
Ta slovenski standard je istoveten z: EN 50463-3:2017
ICS:
45.060.10 9OHþQDYR]LOD Tractive stock
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN 50463-3
NORME EUROPÉENNE
EUROPÄISCHE NORM
October 2017
ICS 45.060.10 Supersedes EN 50463-3:2012
English Version
Railway applications - Energy measurement on board trains -
Part 3: Data handling
Applications ferroviaires - Mesure d'énergie à bord des Bahnanwendungen - Energiemessung auf Bahnfahrzeugen
trains - Partie 3 : Traitement des données - Teil 3: Daten-Behandlung
This European Standard was approved by CENELEC on 2017-05-08. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 50463-3:2017 E
Contents Page
European foreword .6
Introduction .7
1 Scope . 10
2 Normative references. 10
3 Terms, definitions and abbreviations . 10
3.1 Terms and definitions . 10
3.2 Abbreviations . 12
4 Requirements . 12
4.1 General . 12
4.2 Time data . 13
4.2.1 Source . 13
4.2.2 Reference time source . 13
4.2.3 Content . 13
4.2.4 Resolution . 13
4.2.5 Stability . 13
4.2.6 Synchronization . 13
4.2.7 Quality code for time data . 13
4.3 Energy data . 14
4.3.1 Source . 14
4.3.2 Type . 14
4.3.3 Format . 14
4.3.4 Index value overrun . 14
4.3.5 Merging with time data . 14
4.3.6 Quality codes for energy data . 14
4.3.7 k-factor . 15
4.3.8 Accuracy . 15
4.3.9 Transmission from EMF . 15
4.4 Location data . 15
4.4.1 Source . 15
4.4.2 Format . 16
4.4.3 Merging with time data . 16
4.4.4 Accuracy . 16
4.4.5 Quality codes for location data . 16
4.5 Other received or produced data . 17
4.5.1 Types . 17
4.5.2 Data handling prioritization . 17
4.5.3 Time tag . 17
4.6 Consumption point ID (CPID) . 17
4.7 Production of CEBD . 17
4.7.1 General . 17
4.7.2 Type of Data . 17
4.7.3 Time Reference Period . 17
4.7.4 Energy data . 18
4.7.5 Location data . 18
4.7.6 Missing input data . 18
4.7.7 Data integrity . 18
4.7.8 Quality codes. 19
4.7.9 Traction system code . 19
4.8 DHS data storage . 19
4.8.1 Storage periods . 19
4.8.2 Memory Capacity . 19
4.9 Transmission of CEBD from DHS to DCS. 20
4.9.1 General . 20
4.9.2 Type of info . 20
4.9.3 Time between each transfer . 20
4.9.4 Binding to a DCS . 20
4.10 Marking and essential information . 20
4.10.1 Marking of the DHS . 20
4.10.2 Essential information . 20
4.11 Event recording . 21
4.11.1 General . 21
4.11.2 Type of events . 21
4.12 DCS . 22
4.12.1 General . 22
4.12.2 Reception of CEBD from DHS . 22
4.12.3 Request to DHS for CEBD data . 22
4.12.4 Storage of CEBD . 22
4.12.5 Export of CEBD from DCS . 22
4.12.6 Binding the communication with the EMS . 22
4.12.7 EMS discovery. 22
5 Conformity assessment . 22
5.1 General . 22
5.1.1 Introduction . 22
5.1.2 Applicability . 23
5.1.3 Methodology . 23
5.2 Testing framework . 23
5.2.1 General . 23
5.2.2 Reporting . 24
5.3 Design review . 25
5.3.1 General . 25
5.3.2 Interfaces . 25
5.3.3 Access control .
...