Railway applications - Rolling stock - Pantographs: Characteristics and tests - Part 1: Pantographs for main line vehicles

This European Standard specifies the general assembly characteristics which are to be applied to pantographs, to enable current collection from the overhead contact line system. It also specifies the tests the pantographs have to perform, excluding insulators. This European Standard is not applicable to pantograph dielectric tests, which are to be performed on the pantograph installed on the vehicle roof. If no other requirement is agreed between customer and supplier, insulation coordination according to EN 50124 1 may be used. This European Standard is not applicable to pantographs used on isolated metros and light rail systems. These pantographs are considered in EN 50206 2.

Bahnanwendungen - Schienenfahrzeuge - Merkmale und Prüfungen von Stromabnehmern - Teil 1: Stromabnehmer für Vollbahnfahrzeuge

Applications ferroviaires - Matériel roulant - Pantographes: Caractéristiques et essais - Partie 1: Pantographes pour véhicules grandes lignes

Železniške naprave - Vozna sredstva - Odjemniki toka: karakteristike in preskusi - 1. del: Odjemniki toka za železniška vozila na magistralnih progah

Ta evropski standard določa splošne karakteristike konstrukcije, ki morajo veljati za odjemnike toka, da omogočijo odjem toka s sistema voznih vodov. Določa tudi preskuse, ki jih morajo opraviti odjemniki toka, razen izolatorjev. Ta evropski standard ne velja za dielektrične preskuse odjemnikov toka, ki se morajo opraviti na odjemnikih toka, nameščenih na strehi vozila. Če se kupec in dobavitelj ne dogovorita o nobenih drugih zahtevah, se lahko uporabi izolacijska koordinacijska zahteva v skladu z EN 50124-1. Ta evropski standard ne velja za odjemnike toka, ki se uporabljajo na izoliranih sistemih mestnih železnic in lahkih železnic. Te odjemnike toka obravnava EN 50206-2.

General Information

Status
Published
Publication Date
06-May-2010
Withdrawal Date
07-Nov-2010
Current Stage
9093 - Decision to confirm - Review Enquiry
Completion Date
14-Mar-2018

Relations

Buy Standard

Standard
EN 50206-1:2011
English language
25 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 50206-1:2011
01-junij-2011
1DGRPHãþD
SIST EN 50206-1:1998
Železniške naprave - Vozna sredstva - Odjemniki toka: karakteristike in preskusi -
1. del: Odjemniki toka za železniška vozila na magistralnih progah
Railway applications - Rolling stock - Pantographs: Characteristics and tests - Part 1:
Pantographs for main line vehicles
Bahnanwendungen - Schienenfahrzeuge - Merkmale und Prüfungen von
Stromabnehmern - Teil 1: Stromabnehmer für Vollbahnfahrzeuge
Applications ferroviaires - Matériel roulant - Pantographes: Caractéristiques et essais -
Partie 1: Pantographes pour véhicules grandes lignes
Ta slovenski standard je istoveten z: EN 50206-1:2010
ICS:
45.060.01 Železniška vozila na splošno Railway rolling stock in
general
SIST EN 50206-1:2011 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 50206-1:2011

---------------------- Page: 2 ----------------------

SIST EN 50206-1:2011

EUROPEAN STANDARD
EN 50206-1

NORME EUROPÉENNE
May 2010
EUROPÄISCHE NORM

ICS 29.280 Supersedes EN 50206-1:1998


English version


Railway applications -
Rolling stock -
Pantographs: Characteristics and tests -
Part 1: Pantographs for main line vehicles



Applications ferroviaires -  Bahnanwendungen -
Matériel roulant - Schienenfahrzeuge -
Pantographes: Caractéristiques et essais Merkmale und Prüfungen
- von Stromabnehmern -
Partie 1: Pantographes pour véhicules Teil 1: Stromabnehmer
grandes lignes für Vollbahnfahrzeuge





This European Standard was approved by CENELEC on 2010-05-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels


© 2010 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 50206-1:2010 E

---------------------- Page: 3 ----------------------

SIST EN 50206-1:2011
EN 50206-1:2010 – 2 –
Foreword
This European Standard was prepared by SC 9XB, Electromechanical material on board rolling stock, of
Technical Committee CENELEC TC 9X, Electrical and electronic applications for railways. It was
submitted to the CENELEC formal vote and was approved by CENELEC as EN 50206-1 on 2010-05-01.
This document supersedes EN 50206-1:1998.
The main changes brought by this revision are:
– simplification and standardisation of the tolerances for static contact force (Annexes A and B);
– definition of a new investigation test "Measurement of mean static contact force at ambient
temperature" (6.3.4);
– definition of a new combined test "Check of operating system at maximum speed" (6.14);
– adjustment of terms to TSI (static contact force instead of static force);
– deletion of Clause 10;
– update of normative references.

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN and CENELEC shall not be held responsible for identifying any or all such patent rights.
The following dates were fixed:
– latest date by which the EN has to be implemented

at national level by publication of an identical

national standard or by endorsement
(dop) 2011-05-01

– latest date by which the national standards conflicting

with the EN have to be withdrawn
(dow) - *
* D115/202: No dow fixed as long as EN 50206-1:1998 is referenced as such in Technical Specifications
for Interoperability (TSIs).
_________________

---------------------- Page: 4 ----------------------

SIST EN 50206-1:2011
– 3 – EN 50206-1:2010
Contents
Introduction .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.