EN 61189-2:2006
(Main)Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 2: Test methods for materials for interconnection structures
Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 2: Test methods for materials for interconnection structures
Provides a catalogue of test methods representing methodologies and procedures that can be applied to test materials used for manufacturing interconnection structures (printed boards) and assemblies.
Prüfverfahren für Elektromaterialien, Leiterplatten und andere Verbindungsstrukturen und Baugruppen - Teil 2: Prüfverfahren für Materialien für Verbindungsstrukturen
Méthodes d'essais pour les matériaux électriques, les cartes imprimées et autres structures d'interconnexion et ensembles - Partie 2: Méthodes d'essai des matériaux pour structures d'interconnexion
Preskusne metode za električne materiale, tiskane plošče, povezovalne strukture in sestave - 2. del: Preskusne metode za materiale povezovalnih struktur (IEC 61189-2:2006)
General Information
Relations
Standards Content (Sample)
6/29(16., 6,67(1
67$1'$5'
GHFHPEHU
3UHVNXVQHPHWRGH]DHOHNWULþQHPDWHULDOHWLVNDQHSORãþHSRYH]RYDOQH
VWUXNWXUHLQVHVWDYHGHO3UHVNXVQHPHWRGH]DPDWHULDOHSRYH]RYDOQLK
VWUXNWXU,(&
7HVWPHWKRGVIRUHOHFWULFDOPDWHULDOVSULQWHGERDUGVDQGRWKHULQWHUFRQQHFWLRQ
VWUXFWXUHVDQGDVVHPEOLHV3DUW7HVWPHWKRGVIRUPDWHULDOVIRULQWHUFRQQHFWLRQ
VWUXFWXUHV,(&
,&6 5HIHUHQþQDãWHYLOND
6,67(1HQ
!"#$%&’( )&!*+,%- .
---------------------- Page: 1 ----------------------
EUROPEAN STANDARD
EN 61189-2
NORME EUROPÉENNE
September 2006
EUROPÄISCHE NORM
ICS 31.180 Supersedes EN 61189-2:1997 + A1:2000
English version
Test methods for electrical materials, printed boards
and other interconnection structures and assemblies
Part 2: Test methods for materials
for interconnection structures
(IEC 61189-2:2006)
Méthodes d'essais pour les matériaux Prüfverfahren für Elektromaterialien,
électriques, les cartes imprimées Leiterplatten und andere
et autres structures d'interconnexion Verbindungsstrukturen
et ensembles und Baugruppen
Partie 2: Méthodes d'essai des matériaux Teil 2: Prüfverfahren für Materialien
pour structures d'interconnexion für Verbindungsstrukturen
(CEI 61189-2:2006) (IEC 61189-2:2006)
This European Standard was approved by CENELEC on 2006-09-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, the Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2006 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61189-2:2006 E
---------------------- Page: 2 ----------------------
EN 61189-2:2006 - 2 -
Foreword
The text of document 91/564/FDIS, future edition 2 of IEC 61189-2, prepared by IEC TC 91, Electronics
assembly technology, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC
as EN 61189-2 on 2006-09-01.
This European Standard supersedes EN 61189-2:1997 + A1:2000.
The significant technical changes with respect to EN 61189-2:1997 + A1:2000 concern the addition of
several new tests in the following categories:
- C: Chemical test methods
- D: Dimensional test methods
- E: Electrical test methods
- M: Mechanical test methods
- N: Environmental test methods
- X: Miscellaneous test methods
This standard forms part of a series and should be used in conjunction with other parts in the same
series, under the main title Test methods for electrical materials, interconnection structures and
assemblies:
Part 1: General test methods and methodology
Part 2: Test methods for materials for interconnection structures
Part 3: Test methods for interconnection structures (printed boards)
Part 4: Test methods for electronic components assembling characteristics
Part 5: Test methods for printed board assemblies
Part 6: Test methods for materials used in electronic assemblies
It should also be read in conjunction with EN 60068, Environmental testing.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
(dop) 2007-06-01
national standard or by endorsement
– latest date by which the national standards conflicting
(dow) 2009-09-01
with the EN have to be withdrawn
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 61189-2:2006 was approved by CENELEC as a European
Standard without any modification.
__________
---------------------- Page: 3 ----------------------
- 3 - EN 61189-2:2006
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following referenced documents are indispensabl
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.