EN 61249-2-11:2003

Materials for printed boards and other interconnecting structures - Part 2-11: Reinforced base materials, clad and unclad - Polyimide, brominated epoxide modified or unmodified, woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad

Gives requirements for properties of polyimide, brominated epoxide modified or unmodified, woven E-glass laminated sheets, in thickness of 0,05 mm up to 3,2 mm, of defined flammability, copper-clad. The flammability rating is achieved through the use of brominated fire retardants contained as an integral part of the epoxide polymeric structure if present.

Materialien für Verbindungsstrukturen - Teil 2-11: Kaschierte und unkaschierte verstärkte Basismaterialien - Kupferkaschierte mit E-Glasgewebe verstärkte Laminattafeln auf der Basis von Polyimid und bromiertem Epoxidharz, modifiziert oder nicht-modifiziert, mit definierter Brennbarkeit (Brennprüfung mit vertikaler Prüflingslage)

Materiaux pour circuits imprimés et autres structures d'interconnexion - Partie 2-11: Matériaux de base renforcés, plaqués et non plaqués - Feuilles stratifiées renforcées en polyimide et tissu de verre de type E époxyde bromé modifié ou non modifié, d'inflammabilité définie (essai de combustion verticale), plaquées cuivre

Indique les exigences concernant les propriétés des feuilles stratifiées en polyimide et tissu de verre de type E époxyde bromé modifié ou non modifié ayant une épaisseur comprise entre 0,05 mm et 3,2 mm, plaquées cuivre, d'inflammabilité définie. Les caractéristiques d'inflammabilité sont obtenues en utilisant des ignifuges bromés contenus dans la structure polymère époxyde, le cas échéant.

Materiali za tiskane plošče in druge povezovalne strukture -2-11. del: Pokovinjeni in nepokovinjeni ojačeni osnovni materiali - Z bakrom pokovinjeni laminat z določeno gorljivostjo (navpični preskus gorljivosti), ojačen s poliamidom in bromiranim epoksidnim spremenjenim ali nespremenjenim tkanim E-steklom (IEC 61249-2-11:2003)*

General Information

• Status: Published
• Publication Date: 22-Dec-2003
• Withdrawal Date: 30-Nov-2006
• ICS: 31.180 - Printed circuits and boards
• Technical Committee: CLC/SR 91 - Electronics assembly technology
• Drafting Committee: IEC/TC 91 - IEC_TC_91
• Parallel Committee: IEC/TC 91 - IEC_TC_91
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 23-Dec-2003
• Completion Date: 23-Dec-2003
• Ref Project: SIST EN 61249-2-11:2004 - Materials for printed boards and other interconnecting structures -- Part 2-11: Reinforced base materials, clad and unclad - Polyimide, brominated epoxide modified or unmodified, woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad

Standards Content (Sample)

SLOVENSKI SIST EN 61249-2-11:2004

STANDARD
september 2004
Materiali za tiskane plošče in druge povezovalne strukture -2-11. del:
Pokovinjeni in nepokovinjeni ojačeni osnovni materiali - Z bakrom
pokovinjeni laminat z določeno gorljivostjo (navpični preskus gorljivosti),
ojačen s poliamidom in bromiranim epoksidnim spremenjenim ali
nespremenjenim tkanim E-steklom (IEC 61249-2-11:2003)*
Materials for printed boards and other interconnecting structures - Part 2-11:
Reinforced base materials, clad and unclad - Polyimide, brominated epoxide
modified or unmodified, woven E-glass reinforced laminated sheets of defined
flammability (vertical burning test), cooper-clad (IEC 61249-2-11:2003)
ICS 31.180 Referenčna številka
SIST EN 61249-2-11:2004(en)
©  Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD EN 61249-2-11
NORME EUROPÉENNE
EUROPÄISCHE NORM December 2003

ICS 31.180


English version


Materials for printed boards and other interconnecting structures
Part 2-11: Reinforced base materials, clad and unclad –
Polyimide, brominated epoxide modified or unmodified,
woven E-glass reinforced laminated sheets of defined flammability
(vertical burning test), copper-clad
(IEC 61249-2-11:2003)

Materiaux pour circuits imprimés et autres Materialien für Verbindungsstrukturen
structures d'interconnexion Teil 2-11: Kaschierte und unkaschierte
Partie 2-11: Matériaux de base renforcés, verstärkte Basismaterialien –
plaqués et non plaqués – Kupferkaschierte mit E-Glasgewebe
Feuilles stratifiées renforcées en polyimide verstärkte Laminattafeln auf der Basis von
et tissu de verre de type E époxyde bromé Polyimid und bromiertem Epoxidharz,
modifié ou non modifié, d'inflammabilité modifiziert oder nicht-modifiziert,
définie (essai de combustion verticale), mit definierter Brennbarkeit
plaquées cuivre (Brennprüfung mit vertikaler Prüflingslage)
(CEI 61249-2-11:2003) (IEC 61249-2-11:2003)


This European Standard was approved by CENELEC on 2003-12-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,
Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels


© 2003 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.

Ref. No. EN 61249-2-11:2003 E

---------------------- Page: 2 ----------------------

EN 61249-2-11:2003 - 2 -
Foreword
The text of document 91/412/FDIS, future edition 1 of IEC 61249-2-11, prepared by IEC TC 91,
Electronics assembly technology, was submitted to the IEC-CENELEC parallel vote and was
approved by CENELEC as EN 61249-2-11 on 2003-12-01.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2004-09-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2006-12-01

Annexes designated "normative" are part of the body of the standard.
Annexes designated "informative" are given for information only.
In this standard, annex ZA is normative and annexes A, B and C are informative.
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 61249-2-11:2003 was approved by CENELEC as a
European Standard without any modification.
__________

---------------------- Page: 3 ----------------------

- 3 - EN 61249-2-11:2003
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications
This European Standard incorporates by dated or undated reference, provisions from other
publications. These normative references are cited at the appropriate places in the text and t
...