EN 50152-3-1:2017/prA1
(Amendment)Railway applications - Fixed installations - Particular requirements for a.c. switchgear - Part 3-1: Measurement, control and protection devices for specific use in a.c. traction systems - Devices
Railway applications - Fixed installations - Particular requirements for a.c. switchgear - Part 3-1: Measurement, control and protection devices for specific use in a.c. traction systems - Devices
Scope of standard This European Standard is applicable to new low voltage devices for measurement, control and protection which are: — for indoor or outdoor fixed installations in traction systems, and — operated in conjunction with high voltage equipment with an a.c. line voltage and frequency as specified in EN 50163. This European Standard also applies to measurement, control and protective devices other than low voltage devices and not covered by a specific railway product standard as far as reasonably possible. Requirements of this document prevail. Scope of amendment Implementation of 2 technical changes: — Modification of subclause 5.4, second item in list of protection functions. — Aligning the value for short-circuit current of 50 Hz traction systems given in Annex A subclause A.2.1 ‘Line testing – General’ with EN 50388-1:2022 Table 7
Bahnanwendungen - Ortsfeste Anlagen - Besondere Anforderungen an Wechselstrom-Schalteinrichtungen - Teil 3-1: Mess-, Steuerungs- und Schutzeinrichtungen für Wechselstrom-Bahnanlagen - Geräte
Applications ferroviaires - Installations fixes - Exigences particulières pour appareillage à courant alternatif - Partie 3-1 : Dispositifs de mesure, de commande et de protection pour usage spécifique dans les systèmes de traction à courant alternatif - Guide d'application
Železniške naprave - Stabilne naprave električne vleke - Posebne zahteve za stikalne naprave za izmenični tok - 3-1. del: Merilne, krmilne in zaščitne naprave za izključno uporabo v izmeničnih vlečnih sistemih - Naprave - Dopolnilo A1
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-januar-2025
Železniške naprave - Stabilne naprave električne vleke - Posebne zahteve za
stikalne naprave za izmenični tok - 3-1. del: Merilne, krmilne in zaščitne naprave za
izključno uporabo v izmeničnih vlečnih sistemih - Naprave - Dopolnilo A1
Railway applications - Fixed installations - Particular requirements for a.c. switchgear -
Part 3-1: Measurement, control and protection devices for specific use in a.c. traction
systems - Devices
Bahnanwendungen - Ortsfeste Anlagen - Besondere Anforderungen an Wechselstrom-
Schalteinrichtungen - Teil 3-1: Mess-, Steuerungs- und Schutzeinrichtungen für
Wechselstrom-Bahnanlagen - Geräte
Applications ferroviaires - Installations fixes - Exigences particulières pour appareillage à
courant alternatif - Partie 3-1 : Dispositifs de mesure, de commande et de protection
pour usage spécifique dans les systèmes de traction à courant alternatif - Appareillage
Ta slovenski standard je istoveten z: EN 50152-3-1:2017/prA1
ICS:
29.130.99 Druge stikalne in krmilne Other switchgear and
naprave controlgear
29.280 Električna vlečna oprema Electric traction equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD DRAFT
EN 50152-3-1:2017
NORME EUROPÉENNE
EUROPÄISCHE NORM
prA1
November 2024
ICS 29.130.20; 29.280 -
English Version
Railway applications - Fixed installations - Particular
requirements for a.c. switchgear - Part 3-1: Measurement,
control and protection devices for specific use in a.c. traction
systems - Devices
Applications ferroviaires - Installations fixes - Exigences Bahnanwendungen - Ortsfeste Anlagen - Besondere
particulières pour appareillage à courant alternatif - Partie Anforderungen an Wechselstrom-Schalteinrichtungen - Teil
3-1 : Dispositifs de mesure, de commande et de protection 3-1: Mess-, Steuerungs- und Schutzeinrichtungen für
pour usage spécifique dans les systèmes de traction à Wechselstrom-Bahnanlagen - Geräte
courant alternatif - Appareillage
This draft amendment prA1, if approved, will modify the European Standard EN 50152-3-1:2017; it is submitted to CENELEC members for
enquiry.
Deadline for CENELEC: 2025-02-21.
It has been drawn up by CLC/SC 9XC.
If this draft becomes an amendment, CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this amendment the status of a national standard without any alteration.
This draft amendment was established by CENELEC in three official versions (English, French, German).
A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to
the CEN-CENELEC Management Centre has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisatio
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.