EN 60300-3-1:2004

Dependability management - Part 3-1: Application guide - Analysis techniques for dependability - Guide on methodology

Gives a general overview of commonly used dependability analysis techniques. It describes the usual methodologies, their advantages and disadvantages, data input and other conditions for using various techniques. It is an introduction to selected methodologies and is intended to provide the necessary information for choosing the most appropriate analysis methods.

Zuverlässigkeitsmanagement - Teil 3-1: Anwendungsleitfaden - Verfahren zur Analyse der Zuverlässigkeit - Leitfaden zur Methodik

Gestion de la sûreté de fonctionnement - Partie 3-1: Guide d'application - Techniques d'analyse de la sûreté de fonctionnement - Guide méthodologique

La CEI 60300-3-1:2003 donne une vue générale des techniques d'analyse de la sûreté de fonctionnement communément employées. Elledécrit les méthodologies habituelles, les avantages et les inconvénients, les données d'entrée et les autres conditions concernant l'utilisation de techniques différentes. La présente norme constitue une introduction aux méthodologies sélectionnées et est destinée à fournir les informations nécessaires permettant de choisir les méthodes d'analyse les plus appropriées. Cette seconde édition annule et remplace la première édition, publiée en 1991, dont elle constitue une révision technique. Les lignes directrices concernant le choix de techniques d'analyse et le nombre des techniques couvertes ont notamment été étendues. La présente version bilingue (2013-02) correspond à la version anglaise monolingue publiée en 2003-01. Mots clés: techniques d'analyse de la sûreté de fonctionnement

Upravljanje zagotovljivosti - 3-1. del: Vodilo za uporabo - Tehnike analiziranja zagotovljivosti - Vodilo za metodologijo (IEC 60300-3-1:2003)

General Information

• Status: Published
• Publication Date: 14-Sep-2004
• Withdrawal Date: 31-Aug-2007
• ICS: 03.120.30 - Application of statistical methods
• ICS: 21.020 - Characteristics and design of machines, apparatus, equipment
• Technical Committee: CLC/SR 56 - Dependability
• Drafting Committee: IEC/TC 56 - IEC_TC_56
• Parallel Committee: IEC/TC 56 - IEC_TC_56
• Current Stage: 6060 - Document made available - Publishing
• Completion Date: 15-Sep-2004
• Ref Project: SIST EN 60300-3-1:2007 - Dependability management -- Part 3-1: Application guide - Analysis techniques for dependability - Guide on methodology

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60300-3-1:2007
01-januar-2007
Upravljanje zagotovljivosti - 3-1. del: Vodilo za uporabo - Tehnike analiziranja
zagotovljivosti - Vodilo za metodologijo (IEC 60300-3-1:2003)
Dependability management -- Part 3-1: Application guide - Analysis techniques for
dependability - Guide on methodology
Zuverlässigkeitsmanagement -- Teil 3-1: Anwendungsleitfaden - Verfahren zur Analyse
der Zuverlässigkeit - Leitfaden zur Methodik
Gestion de la sûreté de fonctionnement -- Partie 3-1: Guide d'application - Techniques
d'analyse de la sûreté de fonctionnement - Guide méthodologique
Ta slovenski standard je istoveten z: EN 60300-3-1:2004
ICS:
03.120.01 Kakovost na splošno Quality in general
21.020 =QDþLOQRVWLLQQDþUWRYDQMH Characteristics and design of
VWURMHYDSDUDWRYRSUHPH machines, apparatus,
equipment
SIST EN 60300-3-1:2007 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 60300-3-1:2007

---------------------- Page: 2 ----------------------

SIST EN 60300-3-1:2007
EUROPEAN STANDARD EN 60300-3-1
NORME EUROPÉENNE
EUROPÄISCHE NORM September 2004

ICS 03.120.30;21.020


English version


Dependability management
Part 3-1: Application guide –
Analysis techniques for dependability –
Guide on methodology
(IEC 60300-3-1:2003)


Gestion de la sûreté de fonctionnement Zuverlässigkeitsmanagement
Partie 3-1: Guide d'application - Teil 3-1: Anwendungsleitfaden –
Techniques d'analyse de la sûreté Verfahren zur Analyse der Zuverlässigkeit -
de fonctionnement – Leitfaden zur Methodik
Guide méthodologique (IEC 60300-3-1:2003)
(CEI 60300-3-1:2003)


This European Standard was approved by CENELEC on 2004-09-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden,
Switzerland and United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels


© 2004 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.

Ref. No. EN 60300-3-1:2004 E

---------------------- Page: 3 ----------------------

SIST EN 60300-3-1:2007
EN 60300-3-1:2004 - 2 -
Foreword
The text of the International Standard IEC 60300-3-1:2003, prepared by IEC TC 56, Dependability,
was submitted to the formal vote and was approved by CENELEC as EN 60300-3-1 on 2004-09-01.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2005-09-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2007-09-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 60300-3-1:2003 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following note has to be added for the standard indicated:
IEC 60300-2 NOTE Harmonized as EN 60300-2:1996 (not modified).
__________

---------------------- Page: 4 ----------------------

SIST EN 60300-3-1:2007
- 3 - «Field32»
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
NOTE Where an international publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
Publication Year Title EN/HD Year
IEC 60050-191 1990 International Electrotechnical Vocabulary - -
(IEV)
Chapter 191: Dependability and quality of
service

IEC 60300-3-2 19
...