iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CLC

EN 50463-2:2017/AC:2018-10

(Corrigendum)

Railway applications - Energy measurement on board trains - Part 2: Energy measuring

Railway applications - Energy measurement on board trains - Part 2: Energy measuring

TC - Engllish version only; editorial corrections in 4.3.3.4, C.4.5 and E.2.

Bahnanwendungen - Energiemessung auf Bahnfahrzeugen - Teil 2: Energiemessung

Applications ferroviaires - Mesure d'énergie à bord des trains - Partie 2 : Mesure d'énergie

Železniške naprave - Merjenje energije na vlaku - 2. del: Merjenje energije - Popravek AC

General Information

Status
Published
Publication Date
25-Oct-2018
ICS
45.060.10 - Tractive stock
Technical Committee
CLC/TC 9X - Electrical and electronic applications for railways
Drafting Committee
CLC/TC 9X/WG 11 - Energy measurement
Current Stage
6060 - Document made available - Publishing
Start Date
26-Oct-2018
Completion Date
26-Oct-2018
Directive
2008/57/EC - Directive 2008/57/EC of the European Parliament and of the Council of 17 June 2008 on the interoperability of the rail system within the Community (Recast)
Mandate
M/483 - Mandate for programming and standardisation addressed to the European standardisation bodies under directive 2008/57/EC in the field of the interoperability of the rail system within the European Union
Ref Project
SIST EN 50463-2:2018/AC:2020 - Railway applications - Energy measurement on board trains - Part 2: Energy measuring

Relations

Corrects
EN 50463-2:2017 - Railway applications - Energy measurement on board trains - Part 2: Energy measuring
Effective Date
22-May-2018

Buy Standard

EN 50463-2:2018/AC:2020EN 50463-2:2018/AC:2020
PreviousNext
Corrigendum
EN 50463-2:2018/AC:2020
English language
1 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-maj-2020
Železniške naprave - Merjenje energije na vlaku - 2. del: Merjenje energije -
Popravek AC
Railway applications - Energy measurement on board trains - Part 2: Energy measuring
Bahnanwendungen - Energiemessung auf Bahnfahrzeugen - Teil 2: Energiemessung
Applications ferroviaires - Mesure d'énergie à bord des trains - Partie 2 : Mesure
d'énergie
Ta slovenski standard je istoveten z: EN 50463-2:2017/AC:2018-10
ICS:
45.060.10 Vlečna vozila Tractive stock
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CLC
EN 50463-2:2017/A1:2024(Amendment)
Railway applications - Energy measurement on board trains - Part 2: Energy measuring
SIST EN 50463-2:2018/A1:2024

This New Work Item Proposal has the scope to provide an amendment of the European standard EN 50463-2 in order to update the annex ZZ

  • Amendment
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 50463-3:2017/A1:2024(Amendment)
Railway applications - Energy measurement on board trains - Part 3: Data handling
SIST EN 50463-3:2018/A1:2024

This New Work Item Proposal has the scope to provide an amendment of the European standard EN 50463-3 in order to update the annex ZZ

  • Amendment
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 50463-1:2017/A1:2024(Amendment)
Railway applications - Energy measurement on board trains - Part 1: General
SIST EN 50463-1:2018/A1:2024

This New Work Item Proposal has the scope to provide an amendment of the European standard EN 50463-1 in order to update the annex ZZ

  • Amendment
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 50463-5:2017/A1:2024(Amendment)
Railway applications - Energy measurement on board trains - Part 5: Conformity assessment
SIST EN 50463-5:2018/A1:2024

This New Work Item Proposal has the scope to provide an amendment of the European standard EN 50463-5 in order to update the annex ZZ

  • Amendment
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 50317:2012/A1:2022(Amendment)
Railway applications - Current collection systems - Requirements for and validation of measurements of the dynamic interaction between pantograph and overhead contact line
SIST EN 50317:2012/A1:2022

This European Standard specifies the functional requirements for output and accuracy of measurements of the dynamic interaction between pantograph and overhead contact line.

  • Amendment
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
CLC/TS 50238-3:2022(Main)
Railway applications - Compatibility between rolling stock and train detection systems - Part 3: Compatibility with axle counters
SIST-TS CLC/TS 50238-3:2022

For the purpose of demonstrating compatibility between rolling stock and axle counter detectors, this document defines the interference limits and evaluation methods to verify rolling stock emissions. Wheel sensors and crossing loops are not covered by this document. This document gives recommended individual limits to be applied to establish compatibility between RST and all selected types of axle counter detectors, including any covered by national standards. The list of selected types of axle counters and their limits for compatibility are drawn on the basis of established performance criteria. It is expected that the trend for newly signalled interoperable lines will be fitted with types that meet the compatibility limits published in the TSI CCS Interfaces Document (ERA/ERTMS/033281). To ensure adequate operational availability, it is essential that the rolling stock complies with the defined limits; otherwise, the established availability of the valid output function of axle counter detectors may be compromised. NOTE The influences from metal parts or inductively coupled resonant circuits on the vehicle, eddy current brakes or magnetic brakes, are not covered by this document but are considered on the basis of national technical specifications. For wheel sensors and wheel detectors in other applications than axle counters but utilizing the same rail sensors and detectors, transient and continuous interference can be considered as equivalent to axle counter detectors or axle counter sensors.

  • Technical specification
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 50702:2021(Main)
Railway applications - Rolling stock - Conductor rail current collectors (shoegear): Characteristics and tests
SIST EN 50702:2021

This document specifies the tests for the current collectors to enable current collection from the third or fourth rail system as well as associated fuses and short circuit devices. It also specifies the general assembly characteristics to be applied to current collectors. This document is applicable to all types of vehicles with third or fourth rail current collectors. This document does not apply to roof mounted pantographs.

  • Standard
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
CLC/TS 50238-2:2020(Main)
Railway applications - Compatibility between rolling stock and train detection systems - Part 2: Compatibility with track circuits
SIST-TS CLC/TS 50238-2:2020

This document defines, for the purpose of ensuring compatibility between rolling stock and track circuits, the limits for interference current emissions from rolling stock. The measurement and evaluation methods for verifying conformity of rolling stock to these limits are presented in a dedicated annex. The interference limits are only applicable to rolling stock that is intended to run on lines exclusively equipped with preferred track circuits listed in this document. The rolling stock test methodology (infrastructure conditions, test configurations, operational conditions, etc.) presented in this document is applicable to establish compatibility with any track circuits. This document gives guidance on the derivation of interference current limits specified for rolling stock and defines measurement methods and evaluation criteria in a dedicated annex. This document defines: a) a set of interference current limits for RST (Rolling Stock) applicable for each of the following types of traction system: 1) DC (750 V, 1,5 kV and 3 kV); 2) 16,7 Hz AC; 3) 50 Hz AC; b) methodology for the demonstration of compatibility between rolling stock and track circuits; c) measurement method to verify interference current limits and evaluation criteria. NOTE 1 The basic parameters of track circuits associated with the interference current limits for RST are not in the scope of this document. NOTE 2 Any phenomena linked to traction power supply and associated protection (over voltage, short-circuit current, under- and over-voltage if regenerative brakes are used) is part of the track circuit design and outside the scope of this document.

  • Technical specification
    43 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 50238-1:2019(Main)
Railway applications - Compatibility between rolling stock and train detection systems - Part 1: General
SIST EN 50238-1:2021

This document describes a process to demonstrate compatibility between Rolling Stock (RST) and Train Detection Systems (TDS). It describes the characterization of train detection systems, rolling stock and traction power supply systems. It is worth noting that the demonstration of technical compatibility between the rolling stock and infrastructure with respect to physical dimensions is not detailed in this document. This document is not generally applicable to those combinations of rolling stock, traction power supply and train detection system which were accepted as compatible prior to the issue of this document. However, as far as is reasonably practicable, this document can be applied to modifications of rolling stock, traction power supply or train detection systems which may affect compatibility. The detailed process can be used where no rules and processes for compatibility are established.

  • Standard
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 50591:2019(Main)
Railway Applications - Rolling Stock - Specification and verification of energy consumption
SIST EN 50591:2020

The purpose of this document is to support rolling stock procurement, especially life cycle cost (LCC) assessment. This document is applicable to the specification and verification of energy consumption of railway rolling stock. It establishes a criterion for the energy consumption of rolling stock to calculate the total net energy consumed, either at current collector or from the fuel tank, over a predefined service profile, to ensure that the results are directly comparable or representative of the real operation of the train. For this purpose, this document considers the energy consumed and regenerated by the rolling stock. The determination methods covered are the simulation and the measurement. This document provides the framework that gives guidance on the generation of comparable energy performance values for trains and locomotives on a common basis and thereby supports benchmarking and improvement of the energy efficiency of rail vehicles. This document does not cover the comparison of energy consumption with other modes of transportation, or even for comparison between diesel and electric traction, covering only the energy consumption of the railway rolling stock itself.

  • Standard
    52 pages
    English language
    sale 10% off
    e-Library read for
    1 day