Discrete semiconductor devices and integrated circuits - Part 5-2: Optoelectronic devices - Essential ratings and characteristics

Gives the essential ratings and characteristics of the following categories or subcategories of optoelectronic devices which are not intended to be used in the field of fibre optic systems or subsystems: Semiconductor photoemitters, semiconductor photoelectric detectors, semiconductor photosensitive devices, and semiconductor devices utilizing the optical radiation for internal operation.

Einzel-Halbleiterbauelemente und integrierte Schaltungen - Teil 5-2: Optoelektronische Bauelemente - Wesentliche Grenz- und Kennwerte

Dispositifs discrets à semiconducteurs et circuits intégrés - Partie 5-2: Dispositifs optoélectroniques - Valeurs limites et caractéristiques essentielles

Donne les valeurs limites et caractéristiques essentielles des catégories et sous-catégories suivantes de dispositifs optoélectroniques qui ne sont pas destinés à être utilisés dans le domaine des systèmes et sous-systèmes à fibres optiques: Photoémetteurs à semiconducteurs, détecteurs photoélectriques à semiconducteurs, dispositifs photosensibles à semiconducteurs et dispositifs à semiconducteurs utilisant le rayonnement optique pour leur fonctionnement interne.

Discrete semiconductor devices and integrated circuits - Part 5-2: Optoelectronic devices - Essential ratings and characteristics (IEC 60747-5-2:1997)

General Information

Status
Withdrawn
Publication Date
02-Jul-2001
Withdrawal Date
31-Dec-2003
Current Stage

Relations

Buy Standard

Standard
EN 60747-5-2:2002
English language
30 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60747-5-2:2002
01-september-2002
Discrete semiconductor devices and integrated circuits - Part 5-2: Optoelectronic
devices - Essential ratings and characteristics (IEC 60747-5-2:1997)
Discrete semiconductor devices and integrated circuits -- Part 5-2: Optoelectronic
devices - Essential ratings and characteristics
Einzel-Halbleiterbauelemente und integrierte Schaltungen -- Teil 5-2: Optoelektronische
Bauelemente - Wesentliche Grenz- und Kennwerte
Dispositifs discrets à semiconducteurs et circuits intégrés -- Partie 5-2: Dispositifs
optoélectroniques - Valeurs limites et caractéristiques essentielles
Ta slovenski standard je istoveten z: EN 60747-5-2:2001
ICS:
31.080.01 Polprevodniški elementi Semiconductor devices in
(naprave) na splošno general
31.200 Integrirana vezja, Integrated circuits.
mikroelektronika Microelectronics
31.260 Optoelektronika, laserska Optoelectronics. Laser
oprema equipment
SIST EN 60747-5-2:2002 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD EN 60747-5-2
NORME EUROPÉENNE
EUROPÄISCHE NORM July 2001
ICS 31.260
English version
Discrete semiconductor devices and integrated circuits
Part 5-2: Optoelectronic devices -
Essential ratings and characteristics
(IEC 60747-5-2:1997)
Dispositifs discrets à semiconducteurs et Einzel-Halbleiterbauelemente und
circuits intégrés integrierte Schaltungen
Partie 5-2: Dispositifs optoélectroniques - Teil 5-2: Optoelektronische Bauelemente -
Valeurs limites et caractéristiques Wesentliche Grenz- und Kennwerte
essentielles (IEC 60747-5-2:1997)
(CEI 60747-5-2:1997)
This European Standard was approved by CENELEC on 2000-12-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,
Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway,
Portugal, Spain, Sweden, Switzerland and United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2001 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60747-5-2:2001 E

---------------------- Page: 2 ----------------------

EN 60747-5-2:2001 - 2 -
Foreword
The text of the International Standard IEC 60747-5-2:1997, prepared by SC 47C, Flat panel display
devices, of IEC TC 47, Semiconductor devices, was submitted to the Unique Acceptance Procedure
and was approved by CENELEC as EN 60747-5-2 on 2000-12-01 without any modification.
This standard should be read jointly with IEC 60747-1, EN 62007-1 and EN 62007-2.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2002-01-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2004-01-01
Annexes designated "normative" are part of the body of the standard.
Annexes designated "informative" are given for information only.
In this standard, annexes B and ZA are normative and annex A is informative.
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 60747-5-2:1997 was approved by CENELEC as a
European Standard without any modification.
__________

---------------------- Page: 3 ----------------------

- 3 - EN 60747-5-2:2001
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
This European Standard incorporates by dated or undated reference, provisions from other
publications. These normative references are cited at the appropriate places in the text and the
publications are listed hereafter. For dated references, subsequent amendments to or revisions of any
of these publications apply to this European Standard only when incorporated in it by amendment or
revision. For undated references the latest edition of the publication referred to applies (including
amendments).
NOTE When an international publication has been modified by common modifi
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.