EN 60770-2:2003
(Main)Transmitters for use in industrial-process control systems - Part 2: Methods for inspection and routine testing
Transmitters for use in industrial-process control systems - Part 2: Methods for inspection and routine testing
applies to transmitters, which have either a standard analogue electric current output signal or a standard pneumatic output signal in accordance with EN 60381-1 or EN 60382. The tests detailed herein may be applied to transmitters which have other output signals, provided that due allowance is made for such differences.
Messumformer für industrielle Prozessleittechnik - Teil 2: Verfahren für Abnahme und Stückprüfung
Transmetteurs utilisés dans les systèmes de conduite des processus industriels - Partie 2: Méthodes pour l'inspection et les essais individuels de série
Transmitters for use in industrial-process control systems - Part 2: Methods for inspection and routine testing
General Information
Relations
Standards Content (Sample)
SLOVENSKI SIST EN 60770-2:2004
STANDARD
marec 2004
Transmitters for use in industrial-process control systems - Part 2: Methods for
inspection and routine testing
ICS 25.040.40 Referenčna številka
SIST EN 60770-2:2004(en)
© Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno
---------------------- Page: 1 ----------------------
EUROPEAN STANDARD EN 60770-2
NORME EUROPÉENNE
EUROPÄISCHE NORM April 2003
ICS 25.040.40; 17.020
English version
Transmitters for use in industrial-process control systems
Part 2: Methods for inspection and routine testing
(IEC 60770-2:2003)
Transmetteurs utilisés dans les systèmes Messumformer für industrielle
de conduite des processus industriels Prozessleittechnik
Partie 2: Méthodes pour l'inspection Teil 2: Verfahren für Abnahme
et les essais individuels de série und Stückprüfung
(CEI 60770-2:2003) (IEC 60770-2:2003)
This European Standard was approved by CENELEC on 2003-04-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,
Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta,
Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2003 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60770-2:2003 E
---------------------- Page: 2 ----------------------
EN 60770-2:2003 - 2 -
Foreword
The text of document 65B/468/FDIS, future edition 2 of IEC 60770-2, prepared by SC 65B, Devices, of
IEC TC 65, Industrial-process measurement and control, was submitted to the IEC-CENELEC parallel
vote and was approved by CENELEC as EN 60770-2 on 2003-04-01.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2004-01-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2006-04-01
Annexes designated "normative" are part of the body of the standard.
In this standard, annex ZA is normative.
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 60770-2:2003 was approved by CENELEC as a European
Standard without any modification.
__________
---------------------- Page: 3 ----------------------
- 3 - EN 60770-2:2003
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
This European Standard incorporates by dated or undated reference, provisions from other
publications. These normative references are cited at the appropriate places in the text and the
publications are listed hereafter. For dated references, subsequent amendments to or revisions of any
of these publications apply to this European Standard only when incorporated in it by amendment or
revision. For undated references the latest edition of the publication referred to applies (including
amendments).
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
Publication Year Title EN/HD Year
IEC 60050-351 1998 International Electrotechnical - -
Vocabulary
Part 351: Automatic control
IEC 60381-1 1982 Analogue signals for process control HD 452.1 S1 1984
systems
Part 1: Direct current signals
IEC 60382 1991 Analogue pneumatic signal for process EN 60382 1993
control systems
IEC 60410 1973 Sampling plans and procedures for - -
inspection by attributes
IEC 60770-1 1999 Transmitters for use in industrial- EN 60770-1 1999
process control systems
Part 1: Methods for performance
evaluation
IEC 61298-1 1995 Process measurement and control EN 61298-1 1995
devices - General methods and
procedures for evaluating performance
Part 1: General considerations
IEC 61298-2 1995 Part 2: Test
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.