IEC 61753-031-3:2014
(Main)Fibre optic interconnecting devices and passive components - Performance standard - Part 031-3: Non-connectorized single-mode 1×N and 2×N non-wavelength-selective branching devices for Category U - Uncontrolled environment
Fibre optic interconnecting devices and passive components - Performance standard - Part 031-3: Non-connectorized single-mode 1×N and 2×N non-wavelength-selective branching devices for Category U - Uncontrolled environment
IEC 61753-031-3:2014 contains the minimum initial tests and measurement requirements and severities which a non-wavelength selective branching device (NWBD) should satisfy in order to be categorized as meeting the requirements of this standard. The requirements cover balanced bidirectional non-connectorized single-mode 1xN and 2xN non-wavelength-selective branching devices for use in an IEC category U environment (N is the number of branching ports), especially but not exclusively used for PON application. For balanced NWBD two attenuation and uniformity performance classes are considered:
- class A (premium class) which meets more restrictive requirements (i.e. for extended reach PON application) and
- class B (standard class) for standard application (i.e. for normal reach PON application). The requirements also cover unbalanced, bidirectional, non-connectorized, single-mode, non-wavelength-selective branching devices; however, the specifications of unbalanced branching devices are limited to 1 x 2 and 2 x 2 devices because they are the most commonly used. This second edition of IEC 61753-031-3 cancels and replaces the first edition published in 2009 and constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
- an updated and extended scope to reflect an introduction of two attenuation and uniformity performance classes for balanced NWBD instead of branching device technologies on the market;
- an updated list of normative references;
- a more simplified introduction to the two types of spectral bands;
- Clause 5, Performance requirements, has been updated and extended to reflect the introduction of two attenuation and uniformity performance classes for balanced NWBD;
- simplified test items to exclude tests for damp heat (steady state) and impact for performance requirements;
- Annexe A has been changed to introduce the calculated and minimum requirements for attenuation and uniformity;
- Annex B has been updated to reflect revised performance requirements. Keywords: non-wavelength selective branching device (NWBD), IEC Category U environment
Dispositifs d'interconnexion et composants passifs à fibres optiques - Norme de performance - Partie 031-3: Dispositifs de couplage indépendants de la longueur d'onde 1xN et 2xN en unimodal, non-connectorisés, pour catégorie U - Environnement non contrôlé
L'IEC 61753-031-3:2014 contient les exigences et les sévérités initiales minimales d'essais et de mesures auxquelles il convient qu'un dispositif de couplage indépendant de la longueur d'onde (NWBD) satisfasse afin d'être classé comme conforme à la présente norme. Ces exigences couvrent les dispositifs de couplage 1xN et 2xN en unimodal, non connectorisés, bidirectionnels symétriques destinés à être utilisés dans un environnement de catégorie U selon l'IEC (N correspond au nombre de ports de connexion), utilisés en particulier, mais pas de manière exclusive, pour les applications PON. Dans le cas des NWBD symétriques, deux classes d'affaiblissement et d'uniformité sont prises en compte:
- La classe A (classe de première qualité) qui satisfait aux exigences les plus restrictives (à savoir pour les applications PON étendues) et
- la classe B (classe normale) pour les applications normales (à savoir par exemple les applications PON d'étendue normale). Ces exigences couvrent aussi les dispositifs de couplage indépendants de la longueur d'onde en unimodal non-connectorisés bidirectionnels asymétriques; toutefois les spécifications des dispositifs de couplage asymétriques sont limitées aux dispositifs 1 x 2 et 2 x 2 car ce sont eux qui sont les plus couramment utilisés. Cette deuxième édition de l'IEC 61753-031-3 annule et remplace la première édition parue en 2009 et constitue une révision technique. Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente:
- domaine d'application mis à jour et étendu pour rendre compte de l'introduction de deux classes de performances d'affaiblissement et d'uniformité pour les NWBD symétriques à la place des technologies des dispositifs de couplage du marché;
- liste des références normatives mise à jour;
- introduction simplifiée aux deux types de bandes spectrales;
- Article 5, Exigences de performances, mis à jour et étendu pour rendre compte de l'introduction de deux classes de performances d'affaiblissement et d'uniformité pour les NWBD symétriques;
- simplification des essais pour exclure les essais de chaleur humide (état continu) et de chocs pour les exigences de performances;
- modification de l'Annexe A pour introduire les exigences calculées et minimales pour l'affaiblissement et l'uniformité;
- mise à jour de l'Annexe B pour rendre compte de la révision des exigences de performances. Mots clés: dispositif de couplage indépendant de la longueur d'onde (NWBD), environnement de catégorie U de l'IEC
General Information
Relations
Buy Standard
Standards Content (Sample)
IEC 61753-031-3 ®
Edition 2.0 2014-12
INTERNATIONAL
STANDARD
Fibre optic interconnecting devices and passive components – Performance
standard –
Part 031-3: Non-connectorized single-mode 1×N and 2×N non-wavelength-
selective branching devices for Category U – Uncontrolled environment
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.
IEC Central Office Tel.: +41 22 919 02 11
3, rue de Varembé Fax: +41 22 919 03 00
CH-1211 Geneva 20 info@iec.ch
Switzerland www.iec.ch
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.
About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.
IEC Catalogue - webstore.iec.ch/catalogue Electropedia - www.electropedia.org
The stand-alone application for consulting the entire The world's leading online dictionary of electronic and
bibliographical information on IEC International Standards, electrical terms containing more than 30 000 terms and
Technical Specifications, Technical Reports and other definitions in English and French, with equivalent terms in 14
documents. Available for PC, Mac OS, Android Tablets and additional languages. Also known as the International
iPad. Electrotechnical Vocabulary (IEV) online.
IEC publications search - www.iec.ch/searchpub IEC Glossary - std.iec.ch/glossary
The advanced search enables to find IEC publications by a More than 55 000 electrotechnical terminology entries in
variety of criteria (reference number, text, technical English and French extracted from the Terms and Definitions
committee,…). It also gives information on projects, replaced clause of IEC publications issued since 2002. Some entries
and withdrawn publications. have been collected from earlier publications of IEC TC 37,
77, 86 and CISPR.
IEC Just Published - webstore.iec.ch/justpublished
Stay up to date on all new IEC publications. Just Published IEC Customer Service Centre - webstore.iec.ch/csc
details all new publications released. Available online and If you wish to give us your feedback on this publication or
also once a month by email. need further assistance, please contact the Customer Service
Centre: csc@iec.ch.
IEC 61753-031-3 ®
Edition 2.0 2014-12
INTERNATIONAL
STANDARD
Fibre optic interconnecting devices and passive components – Performance
standard –
Part 031-3: Non-connectorized single-mode 1×N and 2×N non-wavelength-
selective branching devices for Category U – Uncontrolled environment
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
PRICE CODE
R
ICS 33.180.10 ISBN 978-2-8322-1819-8
– 2 – IEC 61753-031-3:2014 © IEC 2014
CONTENTS
FOREWORD . 3
1 Scope . 5
2 Normative references . 5
3 Test . 6
4 Test report . 7
5 Performance requirements . 7
5.1 Dimensions . 7
5.2 Sample size . 7
5.3 Test details and requirements . 7
Annex A (normative) A and U requirements of 1 × N and 2 × N NWBDs . 15
A.1 Attenuation and uniformity requirements of 1 × N and 2 × N NWBDs
calculated by the equations of Tests No.1 and 2 . 15
A.2 Minimum requirements at room temperature of attenuation values for
balanced bidirectional 1 × N and 2 × N NWBD . 16
Annex B (normative) Sample size . 18
Bibliography . 19
Table 1 – Test details and requirements . 8
Tableau A.1 – Attenuation and uniformity requirements of balanced bidirectional
NWBD having the most common port configurations for Class A, with the underlying
formulas as specified in the Tests 1 and 2 of Table 1 . 15
Tableau A.2 – Attenuation and uniformity requirements of balanced bidirectional
NWBD having the most common port configurations for Class B, with the underlying
formulas as specified in the Tests 1 and 2 of Table 1 . 16
Tableau A.3 – Attenuation requirements of 1 × 2 and 2 × 2 unbalanced NWBD having
the most common port configurations, with the underlying formula as specified in Test
1 of Table 1 . 16
Tableau A.4 – Minimum requirements at room temperature of attenuation values for
Class A balanced bidirectional NWBD . 17
Tableau A.5 – Minimum requirements at room temperature of attenuation values for
Class B balanced bidirectional NWBD . 17
Table B.1 – Sample size for each test . 18
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
FIBRE OPTIC INTERCONNECTING
DEVICES AND PASSIVE COMPONENTS –
PERFORMANCE STANDARD –
Part 031-3: Non-connectorized single-mode 1×N and 2×N
non-wavelength-selective branching devices for Category U –
Uncontrolled environment
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 61753-031-3 has been prepared by subcommittee 86B: Fibre optic
interconnecting devices and passive components, of IEC technical committee 86: Fibre optics.
This second edition of IEC 61753-031-3 cancels and replaces the first edition published in
2009 and constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous
edition:
a) an updated and extended scope to reflect an introduction of two attenuation and uniformity
performance classes for balanced NWBD instead of branching device technologies on the
market;
– 4 – IEC 61753-031-3:2014 © IEC 2014
b) an updated list of normative references;
c) a more simplified introduction to the two types of spectral bands;
d) Clause 5, Performance requirements, has been updated and extended to reflect the
introduction of two attenuation and uniformity performance classes for balanced NWBD;
e) simplified test items to exclude tests for damp heat (steady state) and impact for
performance requirements;
f) Annexe A has been changed to introduce the calculated and minimum requirements for
attenuation and uniformity;
g) Annex B has been updated to reflect revised performance requirements.
The text of this standard is based on the following documents:
FDIS Report on voting
86B/3792/FDIS 86B/3824/RVD
Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
IEC 61753 consists of the following parts, under the general title Fibre optic interconnecting
devices and passive components – Performance standard.
The committee has decided that the contents of this publication will remain unchanged until
the stability date indicated on the IEC web site under "http://webstore.iec.ch" in the data
related to the specific publication. At this date, the publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
A bilingual version of this publication may be issued at a later date.
FIBRE OPTIC INTERCONNECTING
DEVICES AND PASSIVE COMPONENTS –
PERFORMANCE STANDARD –
Part 031-3: Non-connectorized single-mode 1×N and 2×N
non-wavelength-selective branching devices for Category U –
Uncontrolled environment
1 Scope
This part of IEC 61753 contains the minimum initial tests and measurement requirements and
severities which a non-wavelength selective branching device (NWBD) should satisfy in order
to be categorized as meeting the requirements of this standard.
The requirements cover balanced bidirectional non-connectorized single-mode 1 × N and
2 × N non-wavelength-selective branching devices for use in an IEC category U environment
(N is the number of branching ports), especially but not exclusively used for PON application.
For balanced NWBD two attenuation and uniformity performance classes are considered:
class A (premium class) which meets more restrictive requirements (i.e. for extended reach
PON application) and class B (standard class) for standard application (i.e. for normal reach
PON application).
The requirements also cover unbalanced, bidirectional, non-connectorized, single-mode, non-
wavelength-selective branching devices; however, the specifications of unbalanced branching
devices are limited to 1 × 2 and 2 × 2 devices because they are the most commonly used.
2 Normative references
The following documents, in whole or in part, are normatively referenced in this document and
are indispensable for its application. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any
amendments) appli
...
IEC 61753-031-3 ®
Edition 2.0 2014-12
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Fibre optic interconnecting devices and passive components – Performance
standard –
Part 031-3: Non-connectorized single-mode 1×N and 2×N non-wavelength-
selective branching devices for Category U – Uncontrolled environment
Dispositifs d'interconnexion et composants passifs à fibres optiques – Norme
de performance –
Partie 031-3: Dispositifs de couplage indépendants de la longueur d’onde 1×N
et 2×N en unimodal, non-connectorisés, pour catégorie U –
Environnement non contrôlé
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.
Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite
ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie
et les microfilms, sans l'accord écrit de l'IEC ou du Comité national de l'IEC du pays du demandeur. Si vous avez des
questions sur le copyright de l'IEC ou si vous désirez obtenir des droits supplémentaires sur cette publication, utilisez
les coordonnées ci-après ou contactez le Comité national de l'IEC de votre pays de résidence.
IEC Central Office Tel.: +41 22 919 02 11
3, rue de Varembé Fax: +41 22 919 03 00
CH-1211 Geneva 20 info@iec.ch
Switzerland www.iec.ch
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.
About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.
IEC Catalogue - webstore.iec.ch/catalogue Electropedia - www.electropedia.org
The stand-alone application for consulting the entire The world's leading online dictionary of electronic and
bibliographical information on IEC International Standards, electrical terms containing 20 000 terms and definitions in
Technical Specifications, Technical Reports and other English and French, with equivalent terms in 15 additional
documents. Available for PC, Mac OS, Android Tablets and languages. Also known as the International Electrotechnical
iPad. Vocabulary (IEV) online.
IEC publications search - www.iec.ch/searchpub IEC Glossary - std.iec.ch/glossary
The advanced search enables to find IEC publications by a 65 000 electrotechnical terminology entries in English and
variety of criteria (reference number, text, technical French extracted from the Terms and Definitions clause of
committee,…). It also gives information on projects, replaced IEC publications issued since 2002. Some entries have been
and withdrawn publications. collected from earlier publications of IEC TC 37, 77, 86 and
CISPR.
IEC Just Published - webstore.iec.ch/justpublished
Stay up to date on all new IEC publications. Just Published IEC Customer Service Centre - webstore.iec.ch/csc
details all new publications released. Available online and If you wish to give us your feedback on this publication or
also once a month by email. need further assistance, please contact the Customer Service
Centre: csc@iec.ch.
A propos de l'IEC
La Commission Electrotechnique Internationale (IEC) est la première organisation mondiale qui élabore et publie des
Normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.
A propos des publications IEC
Le contenu technique des publications IEC est constamment revu. Veuillez vous assurer que vous possédez l’édition la
plus récente, un corrigendum ou amendement peut avoir été publié.
Catalogue IEC - webstore.iec.ch/catalogue Electropedia - www.electropedia.org
Application autonome pour consulter tous les renseignements
Le premier dictionnaire en ligne de termes électroniques et
bibliographiques sur les Normes internationales,
électriques. Il contient 20 000 termes et définitions en anglais
Spécifications techniques, Rapports techniques et autres
et en français, ainsi que les termes équivalents dans 15
documents de l'IEC. Disponible pour PC, Mac OS, tablettes
langues additionnelles. Egalement appelé Vocabulaire
Android et iPad.
Electrotechnique International (IEV) en ligne.
Recherche de publications IEC - www.iec.ch/searchpub
Glossaire IEC - std.iec.ch/glossary
La recherche avancée permet de trouver des publications IEC 65 000 entrées terminologiques électrotechniques, en anglais
en utilisant différents critères (numéro de référence, texte, et en français, extraites des articles Termes et Définitions des
comité d’études,…). Elle donne aussi des informations sur les publications IEC parues depuis 2002. Plus certaines entrées
projets et les publications remplacées ou retirées. antérieures extraites des publications des CE 37, 77, 86 et
CISPR de l'IEC.
IEC Just Published - webstore.iec.ch/justpublished
Service Clients - webstore.iec.ch/csc
Restez informé sur les nouvelles publications IEC. Just
Published détaille les nouvelles publications parues. Si vous désirez nous donner des commentaires sur cette
Disponible en ligne et aussi une fois par mois par email. publication ou si vous avez des questions contactez-nous:
csc@iec.ch.
IEC 61753-031-3 ®
Edition 2.0 2014-12
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Fibre optic interconnecting devices and passive components – Performance
standard –
Part 031-3: Non-connectorized single-mode 1×N and 2×N non-wavelength-
selective branching devices for Category U – Uncontrolled environment
Dispositifs d'interconnexion et composants passifs à fibres optiques – Norme
de performance –
Partie 031-3: Dispositifs de couplage indépendants de la longueur d’onde 1×N
et 2×N en unimodal, non-connectorisés, pour catégorie U –
Environnement non contrôlé
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 33.180.10 ISBN 978-2-8322-3190-6
– 2 – IEC 61753-031-3:2014 © IEC 2014
CONTENTS
FOREWORD. 3
1 Scope . 5
2 Normative references . 5
3 Test . 6
4 Test report . 7
5 Performance requirements . 7
5.1 Dimensions . 7
5.2 Sample size . 7
5.3 Test details and requirements . 7
Annex A (normative) A and U requirements of 1 × N and 2 × N NWBDs . 15
A.1 Attenuation and uniformity requirements of 1 × N and 2 × N NWBDs
calculated by the equations of Tests No.1 and 2 . 15
A.2 Minimum requirements at room temperature of attenuation values for
balanced bidirectional 1 × N and 2 × N NWBD . 16
Annex B (normative) Sample size . 18
Bibliography . 19
Table 1 – Test details and requirements (1 of 7) . 8
Tableau A.1 – Attenuation and uniformity requirements of balanced bidirectional
NWBD having the most common port configurations for Class A, with the underlying
formulas as specified in the Tests 1 and 2 of Table 1 . 15
Tableau A.2 – Attenuation and uniformity requirements of balanced bidirectional
NWBD having the most common port configurations for Class B, with the underlying
formulas as specified in the Tests 1 and 2 of Table 1 . 16
Tableau A.3 – Attenuation requirements of 1 × 2 and 2 × 2 unbalanced NWBD having
the most common port configurations, with the underlying formula as specified in Test
1 of Table 1 . 16
Tableau A.4 – Minimum requirements at room temperature of attenuation values for
Class A balanced bidirectional NWBD . 17
Tableau A.5 – Minimum requirements at room temperature of attenuation values for
Class B balanced bidirectional NWBD . 17
Table B.1 – Sample size for each test . 18
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
FIBRE OPTIC INTERCONNECTING
DEVICES AND PASSIVE COMPONENTS –
PERFORMANCE STANDARD –
Part 031-3: Non-connectorized single-mode 1×N and 2×N
non-wavelength-selective branching devices for Category U –
Uncontrolled environment
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 61753-031-3 has been prepared by subcommittee 86B: Fibre optic
interconnecting devices and passive components, of IEC technical committee 86: Fibre optics.
This second edition of IEC 61753-031-3 cancels and replaces the first edition published in
2009 and constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous
edition:
a) an updated and extended scope to reflect an introduction of two attenuation and uniformity
performance classes for balanced NWBD instead of branching device technologies on th
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.