IEC 63004:2015

Standard for receiver fixture interface

IEC 63004:2015(E) the scope is the development of a common receiver fixture interface (RFI) specification that is based upon available commercial standards integrated under a common open architecture. This mechanical/electrical interface is intended to serve government/commercial interest for applications in test, system integration, manufacturing, monitoring, and other functional requirements that demand large contact densities and quick-disconnect mechanical operation.

General Information

• Status: Published
• Publication Date: 13-Dec-2015
• ICS: 01 - GENERALITIES. TERMINOLOGY. STANDARDIZATION. DOCUMENTATION
• ICS: 25.040.01 - Industrial automation systems in general
• ICS: 33.100 - Electromagnetic compatibility (EMC)
• Technical Committee: TC 91 - Electronics assembly technology
• Current Stage: PPUB - Publication issued
• Start Date: 31-Jan-2016
• Completion Date: 14-Dec-2015

Standards Content (Sample)

IEC 63004 ®
Edition 1.0 2015-12
™
IEEE Std 1505
INTERNATIONAL
STANDARD
colour
inside
Standard for receiver fixture interface

All rights reserved. IEEE is a registered trademark in the U.S. Patent & Trademark Office, owned by the Institute of
Electrical and Electronics Engineers, Inc. Unless otherwise specified, no part of this publication may be reproduced
or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without

permission in writing from the IEC Central Office. Any questions about IEEE copyright should be addressed to the
IEEE. Enquiries about obtaining additional rights to this publication and other information requests should be
addressed to the IEC or your local IEC member National Committee.

IEC Central Office Institute of Electrical and Electronics Engineers, Inc.
3, rue de Varembé 3 Park Avenue
CH-1211 Geneva 20 New York, NY 10016-5997
Switzerland United States of America
Tel.: [phone] [e-mail]
Fax: [phone] www.ieee.org
[e-mail]
www.iec.ch
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.

IEC Catalogue - webstore.iec.ch/catalogue Electropedia - www.electropedia.org
The stand-alone application for consulting the entire The world's leading online dictionary of electronic and
bibliographical information on IEC International Standards, electrical terms containing more than 30 000 terms and
Technical Specifications, Technical Reports and other definitions in English and French, with equivalent terms in 15
documents. Available for PC, Mac OS, Android Tablets and additional languages. Also known as the International
iPad. Electrotechnical Vocabulary (IEV) online.

IEC publications search - www.iec.ch/searchpub IEC Glossary - std.iec.ch/glossary
The advanced search enables to find IEC publications by a More than 60 000 electrotechnical terminology entries in
variety of criteria (reference number, text, technical English and French extracted from the Terms and Definitions
committee,…). It also gives information on projects, replaced clause of IEC publications issued since 2002. Some entries
and withdrawn publications. have been collected from earlier publications of IEC TC 37,

77, 86 and CISPR.
IEC Just Published - webstore.iec.ch/justpublished

IEC Customer Service Centre - webstore.iec.ch/csc
Stay up to date on all new IEC publications. Just Published
details all new publications released. Available online and If you wish to give us your feedback on this publication or
also once a month by email. need further assistance, please contact the Customer Service
Centre: [e-mail].
IEC 63004 ®
Edition 1.0 2015-12
IEEE Std 1505™
INTERNATIONAL
STANDARD
colour
inside
Standard for receiver fixture interface

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 25.040 ISBN 978-2-8322-2942-2

IEEE Std 1505-2010
Contents
1. Overview . 1
1.1 Scope . 1
1.2 Purpose . 1
1.3 Background. 1
1.4 Annexes overview . 2
2. Normative references. 2
2.1 Conventions. 6
3. Definitions and special terms . 7
3.1 Special terms. 9
4. Qualification requirements . 10
4.1 Responsibility for inspection . 10
4.2 General requirements. 11
4.3 Qualification inspections . 14
4.4 Inspection conditions. 14
4.5 Qualification inspection. 15
4.6 Method of examination and test. 16
5. Framework specification . 26
5.1 Framework specification introduction . 26
5.2 Framework general specification. 26
5.3 Materials. 30
5.4 Restricted materials . 30
5.5 Dissimilar metals . 30
5.6 Workmanship. 30
5.7 Design and construction . 30
5.8 Framework assembly. 31
5.9 Framework alignment/keying cavities. 48
5.10 Framework ball-lock mechanism. 50
5.11 Framework ball-lock/safety-lock pin devices. 51
5.12 Framework protective cover . 52
5.13 Method of mounting . 52
5.14 Interchangeability . 54
5.15 Framework stroke. 54
5.16 Framework engagement and separation forces. 56
5.17 Framework fixture support weight rating . 56
5.18 Electrical conditional requirements . 56
5.19 Framework durability . 57
5.20 Oversize fixture framework. 57
5.21 Environmental requirements. 57
5.22 Auxiliary parts . 59
5.23 Riveting, upsetting, and spinning over . 59
6. Connector module specification . 59
6.1 Connector module specification introduction. 59
6.2 Connector specification system . 60
6.3 Quality . 60
6.4 General and specific connector contact specification relationships. 60
viii
IEEE Std 1505-2010
6.5 Materials. 61
6.6 Reference materials, platings, and processes. 62
6.7 Design and construction . 62
6.8 Connector assembly. 62
6.9 Interchangeability . 64
6.10 Oversized pin exclusion test . 65
6.11 Contact engagement and separation forces. 66
6.12 Connector mating and unmating. 66
6.13 Contact rating . 67
6.14 Contact resistance. 67
6.15 Contact retention. 67
6.16 Dielectric withstanding voltage . 68
6.17 Signal low-level circuit. 68
6.18 Insulation resistance . 68
6.19 Contact durability/cycle test . 68
6.20 Environmental requirements. 68
6.21 Contacts supplied in reels . 69
6.22 Contact solderability. 70
6.23 Contact resistance to soldering heat/flammability . 70
6.24 Contact crimp tensile strength . 70
6.25 Auxiliary parts . 70
6.26 Marking . 70
6.27 Workmanship. 70
7. Signal module. 70
7.1 Introduction . 70
7.2 General specifications. 71
7.3 Design and construction requirements. 77
7.4 Electrical specifications. 78
7.5 Method of examination and test.
...